-
Vendor:Juniper
Juniper ORHS-800G-DR8-2-P | 800G OSFP Transceiver, DR8-2 SMF 2km, Dual MPO-12
ORHS-800G-DR8-2-P
Stock Status: Enquire
Vendor:JuniperJuniper ORHS-800G-DR8-2-P | 800G OSFP Transceiver, DR8-2 SMF 2km, Dual MPO-12
The Juniper ORHS-800G-DR8-2-P is an 800GBASE-DR8-2 OSFP800 optical transceiver with a Riding Heatsink (RHS) form factor, delivering 800 Gbps aggregate throughput over single-mode fibre up to 2km. Designed for high-density data centre and AI/ML cluster deployments, it uses PAM4 modulation across 8 parallel single-wavelength fiber pairs and connects via dual MPO-12/APC receptacles — enabling flexible breakout to 2x400G DR4 or 8x100G DR1 configurations. Qualified for Juniper's PTX and QFX 800GbE-capable product families, this transceiver is purpose-built for next-generation spine and AI fabric interconnects.
The 9.5mm tall Riding Heatsink module integrates seamlessly with Junos OS and Junos OS Evolved for automatic optics recognition and digital diagnostic monitoring via CMIS compliance. Operating across 0°C to 70°C, it supports standard commercial environments and draws approximately 16–18W. Full technical support is backed by the Juniper Networks Technical Assistance Center (JTAC). Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Juniper
Juniper ORHS-800G-DR4-2 | 800G DR4 OSFP RHS Transceiver, 2km SMF, Dual MPO-12
ORHS-800G-DR4-2
Stock Status: Enquire
Vendor:JuniperJuniper ORHS-800G-DR4-2 | 800G DR4 OSFP RHS Transceiver, 2km SMF, Dual MPO-12
The Juniper ORHS-800G-DR4-2 is an 800G OSFP RHS (Riding Heat Sink) optical transceiver engineered for high-density data centre, AI/ML cluster, and core network deployments. Delivering 800G throughput via 2x400G DR4 channels across up to 2km of single-mode fibre, it uses PAM4 modulation with 8x100Gbps lanes over a dual MPO-12 connector interface. Qualified for Juniper's 800GbE-capable PTX and QFX platforms, it integrates natively with Junos OS and Junos OS Evolved for seamless optics management and monitoring.
The RHS form factor — a 9.5mm tall pluggable module with a riding heat sink — is purpose-built for host systems requiring external thermal management and is not interchangeable with standard OSFP-IHS slots. It supports 2x400G DR4 breakout configurations, complies with IEEE 802.3ck, OSFP MSA, and CMIS Rev 5.0 standards, and includes full Digital Diagnostics Monitoring (DDM/DOM). Every module undergoes system-level power, thermal, and DVT validation by Juniper, with full JTAC support included. Available now at iptrading.com.au — competitive prices and local support. -
Vendor:Juniper
Juniper ORHS-2X800G-FR4-P | 1.6T OSFP224 Transceiver, 2x800G FR4, SMF, 2km, Duplex LC
ORHS-2X800G-FR4-P
Stock Status: Enquire
Vendor:JuniperJuniper ORHS-2X800G-FR4-P | 1.6T OSFP224 Transceiver, 2x800G FR4, SMF, 2km, Duplex LC
The Juniper ORHS-2X800G-FR4-P is a 1.6T OSFP224 optical transceiver module designed for high-density AI, HPC, and hyperscale data centre deployments. Delivering 2x800G via 800GBASE-FR4 over single-mode fibre to 2km, it features a Riding Heat Sink (RHS) flat-top form factor for optimised chassis thermal management. Dual duplex LC connectors support flexible cabling configurations, and the module is rated for standard commercial operating temperatures from 0°C to 70°C.
Built on PAM4 modulation across 8x200G electrical lanes, this module supports 2x800G breakout applications and includes Digital Optical Monitoring (DOM) for real-time link diagnostics. It is OSFP MSA-compliant and compatible with Juniper QFX and PTX series platforms featuring OSFP224 slots. Upgrade your network with gear from iptrading.com.au — Australia's IT hardware specialists. -
Vendor:Juniper
Juniper ORHS-1600G-DR8-2-P | OSFP 1.6T DR8 Transceiver, SMF 2km, Dual MPO-12, RHS
ORHS-1600G-DR8-2-P
Stock Status: Enquire
Vendor:JuniperJuniper ORHS-1600G-DR8-2-P | OSFP 1.6T DR8 Transceiver, SMF 2km, Dual MPO-12, RHS
The ORHS-1600G-DR8-2-P is a 1.6 Tbps OSFP optical transceiver module featuring a Riding Heat Sink (RHS) flat-top form factor, purpose-built for liquid-cooled and air-assisted high-density switch platforms. Using DR8 parallel single-mode architecture with 8x 200G PAM4 lanes, it delivers up to 2 km reach over OS2 single-mode fibre via dual MPO-12 connectors — supporting flexible breakout modes of 1x1.6T, 2x800G, 4x400G, or 8x200G for AI fabric, HPC, and next-generation data centre interconnects.
Compliant with the OSFP-XD MSA and managed via CMIS 5.0, this module supports DOM/DDM for real-time diagnostics and operates across a standard commercial temperature range of 0°C to 70°C. It is hot-pluggable and designed to integrate natively into Juniper's high-density platforms. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Juniper
Juniper ORHS-1600G-DR8-2 | OSFP 1.6T DR8 Transceiver, SMF 2km, MPO-16, PAM4
ORHS-1600G-DR8-2
Stock Status: Enquire
Vendor:JuniperJuniper ORHS-1600G-DR8-2 | OSFP 1.6T DR8 Transceiver, SMF 2km, MPO-16, PAM4
The Juniper ORHS-1600G-DR8-2 is a 1.6 Tbps OSFP optical transceiver designed for next-generation AI/ML fabrics, HPC clusters, and hyperscale data centre interconnects. Featuring a Riding Heat Sink (RHS/flat-top) form factor optimised for liquid-cooled or cold-plate switch environments, it uses a DR8 architecture across 8 parallel single-mode fibre lanes with PAM4 modulation at 200 Gbps per lane, delivering 2 km reach over SMF OS2 via an MPO-16 connector at 1310 nm.
This hot-pluggable OSFP module supports Digital Optical Monitoring (DOM/DDM) and CMIS management interface, ensuring full visibility and compatibility within Juniper's 1600G-capable platforms. Compliant with OSFP MSA and IEEE 802.3dj standards, it operates across a standard commercial temperature range of 0°C to 70°C. Available now at iptrading.com.au — competitive prices and local support. -
Vendor:Juniper
Juniper MX301-M-HW-BASE | MX301 1.6 Tbps Compact 1RU Universal Router, 64GB
MX301-M-HW-BASE
Stock Status: Enquire
Vendor:JuniperJuniper MX301-M-HW-BASE | MX301 1.6 Tbps Compact 1RU Universal Router, 64GB
The Juniper MX301 Universal Router delivers 1.6 Tbps of system throughput in a compact 1 RU fixed-configuration chassis, making it an ideal high-density solution for service provider edge, mobile backhaul, cloud edge, and enterprise WAN deployments. Powered by Juniper's sixth-generation Trio ASIC and Junos OS, it supports up to 26 flexible WAN ports configurable from 1/10 GbE through to 400 GbE, with full multiservice edge capabilities including advanced routing, subscriber management, hierarchical QoS, and line-rate MACsec and IPsec encryption — all at an exceptional 0.3W per Gb power efficiency.
The MX301-M-HW-BASE bundle includes 64 GB of memory and an integrated Routing Engine, enabling seamless deployment without additional hardware investment. Its sixth-generation Trio silicon supports deterministic ultra-low latency, 5G CUPS (3GPP N3/N4/N6/N9), AI edge clustering, and MEF-compliant Ethernet OAM — integrating natively into existing MX Series infrastructures via Junos OS. Order direct from iptrading.com.au — Australian-owned and operated since 2001. -
Vendor:Juniper
Juniper MX301-M-CHAS | MX301 1RU Edge Router, 1.6 Tbps, 64GB RAM, 400GbE
MX301-M-CHAS
Stock Status: Enquire
Vendor:JuniperJuniper MX301-M-CHAS | MX301 1RU Edge Router, 1.6 Tbps, 64GB RAM, 400GbE
The Juniper MX301 Universal Routing Platform is a compact 1 RU edge router delivering up to 1.6 Tbps of system throughput, purpose-built for service provider, cloud, and enterprise WAN edge deployments. Powered by Juniper's sixth-generation Trio silicon, it supports flexible port configurations from 1GbE up to 400GbE across 26 WAN ports — enabling high-density connectivity with exceptional power efficiency as low as 0.3W per Gb. With 64GB RAM and full multiservice capabilities including subscriber management, HQoS, and inline MACsec/IPsec encryption, the MX301 handles demanding edge workloads in a single rack unit.
Running Junos OS, the MX301 integrates seamlessly into existing MX Series infrastructure and supports advanced services including L2/L3 VPN, VPLS, 5G/4G (3GPP CUPS, N3/N4/N6/N9 interfaces), and AI edge clustering. Redundant hot-swappable 850W PSUs ensure continuous uptime. Order now at iptrading.com.au — trusted by Australian IT professionals. -
Vendor:Juniper
Juniper MX301-M-BASE-DC-FS | MX301 1U Edge Router, 1.6 Tbps, 26-Port, DC, 64G RAM
MX301-M-BASE-DC-FS
Stock Status: Enquire
Vendor:JuniperJuniper MX301-M-BASE-DC-FS | MX301 1U Edge Router, 1.6 Tbps, 26-Port, DC, 64G RAM
The Juniper MX301 is a high-density 1U edge router delivering up to 1.6 Tbps throughput on Juniper's sixth-generation Trio silicon — purpose-built for enterprise WAN, metro edge, mobile backhaul, and cloud edge deployments. This DC-powered base configuration ships with 64GB RAM and front-to-rear airflow, supporting up to 26 flexible WAN ports scalable from 1/10 GbE through to 400 GbE. Key differentiators include inline MACsec and IPsec encryption at line rate, full HQoS, and native 5G CUPS support with N3/N4/N6/N9 interfaces — all managed through Junos OS.
The MX301 supports L2/L3 VPN, VPLS, IP/MPLS, and advanced subscriber management, making it a versatile platform for service providers and large enterprises evolving toward AI-native edge and 5G architectures. Redundant DC power supplies with load balancing, TPM hardware security, and seamless interoperability with existing MX Series infrastructure ensure investment protection and operational resilience. In stock and ready to ship from iptrading.com.au — order now for fast dispatch. -
Vendor:Juniper
Juniper MX301-M-BASE-AC-FS | MX301 1RU Edge Router, 1.6 Tbps, 26-Port, 64GB RAM
MX301-M-BASE-AC-FS
Stock Status: Enquire
Vendor:JuniperJuniper MX301-M-BASE-AC-FS | MX301 1RU Edge Router, 1.6 Tbps, 26-Port, 64GB RAM
The Juniper MX301 Universal Routing Platform is a compact 1RU edge router delivering 1.6 Tbps of system throughput, purpose-built for service provider edge, enterprise WAN, mobile backhaul, and AI edge aggregation deployments. Powered by Juniper's sixth-generation Trio silicon, it supports up to 26 configurable WAN ports spanning 1/10GbE through 400GbE, with hardware-accelerated line-rate MACsec and IPsec encryption — all in a power-efficient chassis consuming as little as 0.3W per Gbps. This AC base configuration ships with 64GB RAM and front-to-rear airflow, supported by redundant hot-swappable 850W AC power supplies for carrier-grade reliability.
Running Junos OS, the MX301 delivers full multiservice edge capabilities including subscriber management, hierarchical QoS, L2/L3 VPN, EVPN, MPLS, and 3GPP CUPS with N3/N4/N6/N9 interface support for 5G session management. Dual-stack 4G/5G, advanced 5QI/QFI policy enforcement, and MEF-compliant Ethernet OAM make it equally suited to modern mobile and metro environments. It integrates seamlessly into existing MX Series deployments for a consistent operational experience. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Juniper
Juniper JPSU-3KW-AC-AO | 3000W AC Power Supply, 200-277V, Titanium, Front-to-Back
JPSU-3KW-AC-AO
Stock Status: Enquire
Vendor:JuniperJuniper JPSU-3KW-AC-AO | 3000W AC Power Supply, 200-277V, Titanium, Front-to-Back
The Juniper JPSU-3KW-AC-AO is a 3000W AC power supply module designed for high-capacity Juniper routing and switching chassis. Rated for 200–277V input, it delivers Titanium-level (80 Plus Titanium) efficiency to minimise power consumption and heat dissipation in demanding data centre environments. Front-to-back (port-side exhaust) airflow ensures compatibility with standard hot-aisle/cold-aisle cooling architectures.
This hot-pluggable FRU supports N+1 redundant and load-sharing power configurations, enabling in-service replacement without disrupting chassis operation — critical for mission-critical deployments. Compatible with high-density Juniper MX and PTX series platforms requiring 3000W-class power modules. In stock and ready to ship from iptrading.com.au — order now for fast dispatch. -
Vendor:Juniper
Juniper EX4100-H-RM-DRK1 | EX4100-H Rack Mount DIN Rail Kit, 2-Post, AC & DC
EX4100-H-RM-DRK1
Stock Status: Enquire
Vendor:JuniperJuniper EX4100-H-RM-DRK1 | EX4100-H Rack Mount DIN Rail Kit, 2-Post, AC & DC
The EX4100-H Rack Mount DIN Rail Kit is a purpose-built mounting accessory designed for the Juniper EX4100-H-12MP switch in two-post rack and cabinet deployments. The bracket integrates a DIN Rail channel that securely accommodates both the switch and its power supply unit, supporting AC and DC power configurations. This kit is ideal for industrial and ruggedised environments where compact, secure hardware mounting is critical.
Compatible exclusively with the EX4100-H-12MP AC and DC switch variants, this separately orderable accessory simplifies installation within standard two-post racks or enclosed cabinets. It is suited to harsh indoor and outdoor deployment scenarios typical of the EX4100-H Series. Order today from iptrading.com.au — Australia's IT hardware specialists.
Upgrade your network with gear from iptrading.com.au — Australia's IT hardware specialists. -
Vendor:Juniper
Juniper EX4100-H-12-WMK1 | EX4100-H Wall Mount Kit for EX4100-H-12MP Switch
EX4100-H-12-WMK1
Stock Status: Enquire
Vendor:JuniperJuniper EX4100-H-12-WMK1 | EX4100-H Wall Mount Kit for EX4100-H-12MP Switch
The EX4100-H-12-WMK Wall Mount Kit is a dedicated mounting accessory designed specifically for the Juniper EX4100-H-12MP ruggedised industrial Ethernet switch, supporting both AC and DC-powered variants. It provides a secure wall installation option for deployments where rack or desk mounting is impractical — ideal for industrial facilities, warehouses, and other hardened environments.
This separately orderable kit complements the full range of EX4100-H-12MP mounting solutions, including the 2-post rack mount (EX4100-H-12-RMK), magnet mount (EX4100-H-12-MMK), and DIN rail kit (EX4100-H-12-DRK), giving installers maximum flexibility for site-specific requirements. In stock and ready to ship from iptrading.com.au — order now for fast dispatch. -
Vendor:Juniper
Juniper EX4100-H-12-MMK1 | EX4100-H Magnet Mount Kit for 12MP AC/DC Switch
EX4100-H-12-MMK1
Stock Status: Enquire
Vendor:JuniperJuniper EX4100-H-12-MMK1 | EX4100-H Magnet Mount Kit for 12MP AC/DC Switch
The Juniper EX4100-H Magnet Mount Kit (EX4100-H-12-MMK) is a purpose-built mounting accessory for the EX4100-H-12MP AC and DC ruggedised industrial switches. The kit includes two magnetic support plates — one for the switch and one for the external PSU — enabling secure attachment to any smooth, contaminant-free ferrous surface inside a certified enclosure. Ideal for industrial IT rooms and secure cabinets where rack or DIN rail mounting is not practical, this solution simplifies flexible switch deployment without permanent fixings.
Designed specifically for indoor use within enclosures rated IP54 or UL Type 4 and above, the magnet mount system supports mounting heights up to 2 metres on ferrous walls. It complements the full range of EX4100-H mounting options including wall, rack, desk, and DIN rail configurations — giving network engineers maximum flexibility in space-constrained or non-standard industrial deployments. Visit iptrading.com.au to secure your order — enterprise-grade hardware with expert support. -
Vendor:Juniper
Juniper EX-SFP-1GE-T | EX Series 1G Copper SFP Transceiver, RJ-45, 100m
EX-SFP-1GE-T
Stock Status: Enquire
Vendor:JuniperJuniper EX-SFP-1GE-T | EX Series 1G Copper SFP Transceiver, RJ-45, 100m
The Juniper EX Series 1G Copper SFP Transceiver delivers 10/100/1000BASE-T connectivity over standard RJ-45 cabling, providing a flexible and cost-effective alternative to fibre-optic modules. Designed for use with Juniper EX Series switches and routers, it supports auto-negotiation across all three speeds and reaches up to 100 m over Category 5 UTP — making it ideal for enterprise LAN deployments where existing copper infrastructure is already in place.
Compliant with IEEE 802.3i, 802.3u, and 802.3ab standards as well as the SFP Multi-Source Agreement (MSA), this hot-swappable module integrates seamlessly into Juniper EX Series SFP slots without network downtime. Its low power draw and copper media support make it a practical choice for data centre and campus edge connectivity. Order direct from iptrading.com.au — Australian-owned and operated since 2001. -
Vendor:Juniper
Juniper EX4100-H-12-DRK1 | EX4100-H DIN Rail Mount Kit for EX4100-H-12MP Switch
EX4100-H-12-DRK1
Stock Status: Enquire
Vendor:JuniperJuniper EX4100-H-12-DRK1 | EX4100-H DIN Rail Mount Kit for EX4100-H-12MP Switch
The EX4100-H DIN Rail Kit is a purpose-built mounting accessory for the Juniper EX4100-H-12MP switch, enabling secure installation onto standard DIN rails within industrial enclosures and cabinets. Designed for ruggedised deployment environments including defence, transportation, and traffic management, this kit supports both AC and DC power supply variants of the EX4100-H-12MP — ensuring flexibility across different site configurations.
Sold as a separately orderable accessory for the EX4100-H platform, it simplifies integration into industrial-grade infrastructure where DIN rail mounting is the standard form of equipment installation. Buy today from iptrading.com.au — fast shipping and expert service across Australia. -
Vendor:Juniper
Juniper EX-CBL-VCP-5M | EX Series Virtual Chassis Port Stacking Cable, 5m
EX-CBL-VCP-5M
Stock Status: Enquire
Vendor:JuniperJuniper EX-CBL-VCP-5M | EX Series Virtual Chassis Port Stacking Cable, 5m
The EX-CBL-VCP-5M is a 5-metre Virtual Chassis Port (VCP) stacking cable purpose-built for interconnecting Juniper EX4200, EX4500, and EX4550 series switches into a unified Virtual Chassis. By connecting via the dedicated dual rear-panel VCP ports, this cable enables up to 10 switches to operate as a single logical device — simplifying management, increasing resiliency, and delivering a combined 128 Gbps virtual backplane bandwidth across the stack.
Supporting ring, mesh, and chain topologies, the VCP cable carries both data and control plane traffic between member switches, enabling automatic master/backup Route Engine election and centralised configuration of the entire chassis. Ideal for enterprise campus and data centre deployments requiring scalable, high-availability switch stacking. Need it fast? iptrading.com.au delivers across Australia — shop now.
Trusted ICT Solutions Backed by 20+ Years of Expertise
At IP Trading, we specialise in delivering high-quality ICT products and solutions tailored to business, government, and enterprise needs. With over two decades of experience, we provide seamless procurement, expert support, and competitive pricing on a vast range of networking, security, server, storage, and power solutions. Our dedicated account managers ensure streamlined interactions with preferred vendors, eliminating time-consuming follow-ups while offering expert advice on project design, sourcing, and implementation.
Why Choose IP Trading?
We are a trusted supplier to Federal, State, and Local Government departments, Not-for-Profit organisations, and businesses of all sizes. Our team of experts in technical sales, logistics, finance, and account management ensures efficiency at every stage—from presales consultation to contract negotiation. As a registered supplier on the Australian Government’s DTA Hardware Marketplace and a prequalified ICT provider for NSW and QLD Government projects, we bring credibility and reliability to every transaction. Partner with IP Trading for flexible, innovative, and cost-effective ICT solutions tailored to your needs.