Overview
When two buildings sit too far apart for a normal cable run, getting your network from one to the other becomes a real problem. A second internet service means another monthly bill and another install wait. Trenching fibre or ethernet across a yard, car park or road means cost and downtime. Consumer Wi-Fi extenders give up within 50 to 80 metres.
A point-to-point wireless bridge solves it cleanly. A pair of matched outdoor units, one at each building, create a high-speed wireless link that carries your existing connection across the gap and hands it over as if you had run an ethernet cable. It works with any internet source, including NBN and Starlink, and it carries a full ethernet connection, so the far building gets Wi-Fi, cameras, access control, VoIP and wired devices, not just internet.
IP Trading supplies complete Cambium point-to-point kits from our Sydney warehouse, with presales support to spec the right solution for your distance and site. Whether you are connecting a second office, a warehouse, a rural business premises, or a remote building on a single site, we can help you get it right the first time.
For step-by-step guides, see how to extend a Starlink connection, an NBN connection, or read our explainer on how a point-to-point bridge works.
Benefits
-
No Trenching, No Second Service
One wireless bridge links the two buildings in an afternoon. No cable in the ground, no second internet account, no carrier lead time.
-
Full Ethernet, Not Just Wi-Fi
The bridge carries a complete network connection, so the far building runs Wi-Fi, IP cameras, access control, VoIP phones and wired devices, all on one network.
-
Built for Australian Conditions
Weatherproof, outdoor-rated units with pre-paired radios for fast setup, and reliable performance to around 1 to 1.5 km in line with local ACMA power limits.
Featured products
-
Vendor:Cambium Networks
Cambium Networks C050940B831A | ePMP Force 4518 Bridge-in-a-Box 5 GHz PTP Kit, 1 x GbE, Passive PoE (ANZ)
C050940B831A
In stock
Vendor:Cambium NetworksCambium Networks C050940B831A | ePMP Force 4518 Bridge-in-a-Box 5 GHz PTP Kit, 1 x GbE, Passive PoE (ANZ)
The ePMP Force 4518 Bridge-in-a-Box is a complete 5 GHz point-to-point kit for fast, reliable building-to-building connectivity. It includes two matched radios with integrated directional antennas, each with a Gigabit Ethernet port and passive PoE injector for simple, tidy installs. Designed for outdoor use with robust mounting hardware and ANZ power cords, it's ideal for extending networks to remote sites. Backed by Cambium Networks' warranty and manageable via cnMaestro. Available now at iptrading.com.au competitive prices and local support. -
Vendor:Cambium Networks
Cambium Networks XV2-21X0B00-RW | XV2-21X Indoor Dual Radio WiFi 6 AP, 2x2, GbE
XV2-21X0B00-RW
In stock
Vendor:Cambium NetworksCambium Networks XV2-21X0B00-RW | XV2-21X Indoor Dual Radio WiFi 6 AP, 2x2, GbE
Elevate your network infrastructure with the Cambium Networks XV2-21X0B00-RW, an advanced Indoor Dual Radio WiFi 6 Access Point designed to deliver robust and reliable connectivity. This cutting-edge solution is engineered to meet the demands of modern enterprises, offering seamless integration and enhanced performance for high-density environments. With its 2x2 MIMO technology and Gigabit Ethernet capabilities, the XV2-21X0B00-RW ensures optimal data throughput and minimal latency, empowering your business with uninterrupted, high-speed wireless access. Ideal for businesses seeking to enhance their network efficiency, this WiFi 6 AP is a strategic investment in future-proofing your connectivity solutions. Experience the power of next-generation wireless technology and transform your network's potential today. -
Vendor:Cambium Networks
Cambium Networks N000000L034B | 30.5W 56V 5GbE Indoor PoE Injector, Energy Level VI
N000000L034B
In stock
Vendor:Cambium NetworksCambium Networks N000000L034B | 30.5W 56V 5GbE Indoor PoE Injector, Energy Level VI
The Cambium Networks N000000L034B is a 5GbE PoE power injector delivering 56V at 30.5W to Cambium wireless access points, IP cameras, and VoIP phones over a single Ethernet cable. Designed for indoor deployment, it supports a wide AC input range of 90–300 VAC for global compatibility and meets Energy Level VI efficiency standards, reducing operational energy costs. Advanced protection includes 6kV/8kV ESD and 4kV lightning surge protection on data and PoE lines.
Compatible with a broad range of Cambium devices including the e600, e500, e510, e700, XV-2-2, PTP 550, ePMP 3000, ePMP Force 425, ePMP Force 400C, and PMP/PTP 450i series, this injector has been requalified to support 5GbE data rates — upgrading from the original 1GbE specification. RoHS and WEEE compliant. Order today from iptrading.com.au — your local source for enterprise-grade networking solutions.
