-
Vendor:HPE
HPE S3Y23A | MSA 32G FC SFP+ SW Transceivers (4-Pack) - 32G, LC, 850nm, up to 100m
S3Y23A
Stock Status: Enquire
Vendor:HPEHPE S3Y23A | MSA 32G FC SFP+ SW Transceivers (4-Pack) - 32G, LC, 850nm, up to 100m
High-performance short-wave optics set for HPE MSA storage and Fibre Channel SANs. This 4-pack of 32G FC SFP+ modules delivers low-latency links for flash-optimised arrays and modern fabrics, with hot-swap convenience and digital diagnostics for easy monitoring. Backed by HPE warranty when used in supported systems, these LC-connector transceivers provide reliable 32G connectivity and backward compatibility on supported ports. Get it now at iptrading.com.au authentic hardware, reliable service. -
Vendor:ATEN
ATEN 2A-143G | 2A-143G 1G Copper SFP Transceiver, RJ45 1000BASE-T, 100 m
2A-143G
Stock Status: Enquire
Vendor:ATENATEN 2A-143G | 2A-143G 1G Copper SFP Transceiver, RJ45 1000BASE-T, 100 m
The ATEN 2A-143G is a hot-swappable 1G copper SFP transceiver that converts an SFP slot into an RJ45 port for 10/100/1000 Mbps Ethernet. It's ideal for extending copper links up to 100 metres over Cat5e/6 while preserving switch SFP expansion flexibility and density. Built to SFP MSA standards for broad interoperability, it offers low power draw and reliable operation in commercial environments, and is backed by the manufacturer's warranty for peace of mind. Visit iptrading.com.au to secure your order enterprise-grade hardware with expert support. -
Vendor:ATEN
ATEN 2A-142G | Single-Mode, 10 km, LC, G.652D, SFP+ 10G Transceiver
2A-142G
Stock Status: Enquire
Vendor:ATENATEN 2A-142G | Single-Mode, 10 km, LC, G.652D, SFP+ 10G Transceiver
Compact SFP+ 10G optical transceiver for single-mode links up to 10 km. Ideal for switch, router, and server uplinks where reliable long-reach 10 Gigabit connectivity is required via LC duplex cabling on G.652D SMF. Backed by the manufacturer's standard warranty and designed for easy, hot-swappable installation in any SFP+ slot. In stock and ready to ship from iptrading.com.au order now for fast dispatch. -
Vendor:ATEN
ATEN 2A-141G | MMF OM3, 300 m, LC, SFP+ SR Transceiver, 10GBASE-SR
2A-141G
Stock Status: Enquire
Vendor:ATENATEN 2A-141G | MMF OM3, 300 m, LC, SFP+ SR Transceiver, 10GBASE-SR
The ATEN 2A-141G is a hot-swappable SFP+ SR transceiver that delivers reliable 10GbE connectivity over multi-mode fibre. It uses LC duplex connectors and is designed for OM3 cabling with reach up to 300 m, ideal for server uplinks, storage, and campus aggregation. Compatible with industry-standard SFP+ ports and MSA-compliant devices, the 2A-141G helps you expand bandwidth without a platform change. Backed by ATEN's manufacturer support. Upgrade your network with gear from iptrading.com.au Australia's IT hardware specialists. -
Vendor:ATEN
ATEN 2A-137G | KE89xx/KE99xx SFP 1000BASE-LX 1310nm Single-Mode 10km LC
2A-137G
Stock Status: Enquire
Vendor:ATENATEN 2A-137G | KE89xx/KE99xx SFP 1000BASE-LX 1310nm Single-Mode 10km LC
The 2A-137G is an SFP fibre transceiver designed for ATEN KE89xx/KE99xx KVM over IP extenders, delivering reliable 1.25 Gbps Gigabit Ethernet over single-mode fibre. It uses 1310 nm optics with an LC duplex connector to provide up to 10 km reach for campus and inter-building links. Hot-swappable and standards-based (1000BASE-LX), it integrates quickly into existing fibre runs and is backed by the manufacturer's warranty for peace of mind. iptrading.com.au your local source for enterprise-grade networking solutions. -
Vendor:ATEN
ATEN 2A-136G | KE89/KE99 Series SFP Transceiver 1.25G MMF 1300 nm 550 m (2-Pack)
2A-136G
Stock Status: Enquire
Vendor:ATENATEN 2A-136G | KE89/KE99 Series SFP Transceiver 1.25G MMF 1300 nm 550 m (2-Pack)
This 1.25G multi-mode SFP transceiver kit is designed for ATEN KE89xx/KE99xx Series devices, delivering reliable fibre links up to 550 m at 1300 nm. It uses an LC duplex interface and is hot-swappable for easy, tool-free maintenance. Supplied as a pack of two modules, it's ideal for redundant links or dual-port deployments and is backed by ATEN's standard warranty. Need it fast?. iptrading.com.au delivers across Australia shop now. Need it fast? iptrading.com.au delivers across Australia shop now. -
Vendor:Blue Cable Co
JG331A-BCC | Aruba Compatible 40GB QSFP to 4 x 10GB SFP+ Direct Attach Breakout Cable | 5M
JG331A-BCC
Stock Status: Enquire
Vendor:Blue Cable CoJG331A-BCC | Aruba Compatible 40GB QSFP to 4 x 10GB SFP+ Direct Attach Breakout Cable | 5M
The JG331A-BCC is a drop-in compatible replacement for the Aruba JG331A. This passive copper breakout cable provides plug-and-play connectivity in Aruba switches and HPE FlexNetwork platforms requiring a 40G QSFP+ to 4x10G SFP+ interface. - 40GBASE-CR4 compliance ensures seamless operation with any switch or NIC supporting the standard, splitting one 40Gbps QSFP+ port into four independent 10Gbps SFP+ lanes - Each of the four 10G lanes operates independently at 10.3 Gbps per channel over passive twinax copper - QSFP+ MSA (SFF-8436) and SFP+ MSA (SFF-8431) compliant connectors guarantee mechanical and electrical compatibility - Passive construction requires no external power and delivers lower latency than active cables - 5-meter reach suitable for top-of-rack, server-to-switch, and intra-rack interconnects in data centers and enterprise networks - 30AWG twinax cable with 20mm minimum bend radius and 0 to 70°C operating temperature range -
Vendor:Blue Cable Co
ITFZTCHTC-BCC | Sophos Compatible 1GB Ethernet RJ45 100m (1000BASE-T)
ITFZTCHTC-BCC
In stock
Vendor:Blue Cable CoITFZTCHTC-BCC | Sophos Compatible 1GB Ethernet RJ45 100m (1000BASE-T)
The ITFZTCHTC-BCC is a drop-in compatible replacement for the Sophos ITFZTCHTC. This copper SFP transceiver provides plug-and-play 1000BASE-T connectivity for Sophos network equipment with standard SFP ports. - IEEE 802.3ab compliant 1000BASE-T operation guarantees interoperability with Gigabit Ethernet infrastructure over copper - SFP form factor, 1.25 Gbps data rate, RJ45 connector, up to 100m reach over Cat5/Cat5e/Cat6 unshielded twisted-pair cable - Auto-negotiation support for 10/100/1000 Mbps operation ensures backward compatibility with Fast Ethernet and legacy 10BASE-T links - Commercial temperature range (0 to 70°C) suitable for standard networking environments - Hot-swappable design allows module installation and removal without service interruption -
Vendor:Blue Cable Co
ITFZTCHLX-BCC | Sophos Compatible 1GB Single-Mode 10km (1000BASE-LX)
ITFZTCHLX-BCC
In stock
Vendor:Blue Cable CoITFZTCHLX-BCC | Sophos Compatible 1GB Single-Mode 10km (1000BASE-LX)
The ITFZTCHLX-BCC is a drop-in compatible replacement for the Sophos ITFZTCHLX. It delivers plug-and-play compatibility with Sophos UTM, SG, and XG Series firewalls equipped with SFP ports, providing reliable 1000BASE-LX connectivity over single-mode fibre. - Complies with IEEE 802.3z 1000BASE-LX standard, guaranteeing interoperability with existing Gigabit Ethernet infrastructure - SFP form factor with 1.25Gbps data rate, 1310nm wavelength, and 10km reach over single-mode fibre via duplex LC connector - DOM (Digital Optical Monitoring) support for real-time diagnostics of temperature, voltage, transmit power, receive power, and laser bias current - Operating temperature range of 0 to 70 degrees Celsius for reliable performance in standard networking environments - Tested for compatibility with Sophos hardware to ensure seamless integration into UTM, SG, and XG firewall platforms -
Vendor:Blue Cable Co
MA-CBL-100G-xM-BCC | Meraki Compatible QSFP to QSFP Copper Direct-Attach 100GBASE-CR4 Cable | 1 to 5M
MA-CBL-100G-50CM-BCC
Stock Status: Enquire
Vendor:Blue Cable CoMA-CBL-100G-xM-BCC | Meraki Compatible QSFP to QSFP Copper Direct-Attach 100GBASE-CR4 Cable | 1 to 5M
The MA-CBL-100G-xM-BCC is a drop-in compatible replacement for the Meraki MA-CBL-100G-50CM. This passive twinax cable provides plug-and-play compatibility with Meraki MS355 and MS450 switches for high-speed stacking and 100G connectivity. - Complies with IEEE 802.3bj and SFF-8665/SFF-8679 standards, ensuring full 100GBASE-CR4 interoperability - QSFP28 to QSFP28 passive copper twinax construction with 100 Gbps aggregate data rate over 4 independent full-duplex channels - Each channel supports up to 25.8 Gbps data rate for 100G Ethernet applications - Available in 0.5M, 1M, and 3M lengths to accommodate rack-level stacking configurations - Operates from 0 to 70 degrees C with maximum 1.5W power consumption per end on 3.3V supply - Hot-swappable design with RoHS compliance and CE certification -
Vendor:Blue Cable Co
MA-CBL-40G-xM-BCC | Meraki Compatible QSFP to QSFP Copper DAC Cable, 40GB, 40GBASE-CR4 | 0.5 to 3M
MA-CBL-40G-50CM-BCC
Stock Status: Enquire
Vendor:Blue Cable CoMA-CBL-40G-xM-BCC | Meraki Compatible QSFP to QSFP Copper DAC Cable, 40GB, 40GBASE-CR4 | 0.5 to 3M
The MA-CBL-40G-xM-BCC is a drop-in compatible replacement for the Meraki MA-CBL-40G-50CM. This passive copper direct attach cable provides plug-and-play connectivity for Meraki MS-series switches requiring 40G stacking or interconnect. - 40GBASE-CR4 and SFF-8436 compliance guarantees interoperability with standards-compliant 40G QSFP+ ports - QSFP+ to QSFP+ passive twinax copper cable assembly delivering 40Gbps data rate over copper - Suitable for short-range interconnects within and across adjacent equipment racks - Available in three lengths: 0.5M, 1M, and 3M to accommodate varied rack configurations - Hot-pluggable design with low power consumption compared to optical alternatives - Compatible with Meraki MS210, MS225, MS250, MS350, MS410, and MS425 switch families for stacking applications -
Vendor:Blue Cable Co
SFP-1GZXLC-BCC | Moxa Compatible 1GB Single-Mode ZR - 70km (1000BASE-ZX)
SFP-1GZXLC-BCC
In stock
Vendor:Blue Cable CoSFP-1GZXLC-BCC | Moxa Compatible 1GB Single-Mode ZR - 70km (1000BASE-ZX)
The SFP-1GZXLC-BCC is a drop-in compatible replacement for the Moxa SFP-1GZXLC. It works as a plug-and-play solution in Moxa Gigabit Ethernet switches and routers that support 1000BASE-ZX SFP modules. - IEEE 802.3z compliant, ensuring interoperability with any standards-based Gigabit Ethernet network - SFP form factor supporting 1000BASE-ZX at 1550nm wavelength over single-mode fibre with LC duplex connector - Reaches up to 70km over OS1/OS2 single-mode fibre depending on link loss budget - Digital Diagnostic Monitoring (DDM) function provides real-time visibility of transceiver parameters including temperature, voltage, and optical power levels - Hot-swappable design allows installation and removal without interrupting network operations - Operating temperature range of 0 to 60°C suits standard commercial networking environments -
Vendor:Blue Cable Co
SFP-10GZRLC-T-BCC | Moxa Compatible 10GB Single-Mode ZR - 80km (10GBASE-ZR)
SFP-10GZRLC-T-BCC
In stock
Vendor:Blue Cable CoSFP-10GZRLC-T-BCC | Moxa Compatible 10GB Single-Mode ZR - 80km (10GBASE-ZR)
The SFP-10GZRLC-T-BCC is a drop-in compatible replacement for the Moxa SFP-10GZRLC-T. This SFP+ transceiver operates at 1550nm and delivers 10 Gigabit Ethernet connectivity over single-mode fiber at distances up to 80km, making it suitable for extended-reach industrial network deployments. - IEEE 802.3ae compliance ensures interoperability with standard 10 Gigabit Ethernet infrastructure - SFP+ form factor with duplex LC connector, 10GBASE-ZR standard, 1550nm wavelength, 80km reach over SMF - Digital diagnostic monitoring (DDM) function provides real-time access to temperature, voltage, current, and optical power parameters - Hot-pluggable design with -40 to 85°C operating range for harsh industrial environments - SFF-8432 SFP+ MSA compliant for broad platform compatibility across industrial Ethernet switches -
Vendor:Blue Cable Co
SFP-10GSRLC-T-BCC | Moxa Compatible 10GB Multi-Mode 300m (10GBASE-SR)
SFP-10GSRLC-T-BCC
In stock
Vendor:Blue Cable CoSFP-10GSRLC-T-BCC | Moxa Compatible 10GB Multi-Mode 300m (10GBASE-SR)
The SFP-10GSRLC-T-BCC is a drop-in compatible replacement for the Moxa SFP-10GSRLC-T. This plug-and-play SFP+ module delivers reliable 10 Gigabit Ethernet connectivity in Moxa industrial switches and networking platforms equipped with SFP+ ports. - IEEE 802.3ae 10GBASE-SR compliance guarantees interoperability with standard 10GbE networks over multimode fibre - SFP+ form factor with 850nm VCSEL technology, supporting 33m over OM1, 82m over OM2, 300m over OM3, and 400m over OM4 multimode fibre via duplex LC connector - Digital optical monitoring (DOM) provides real-time visibility into optical power, temperature, laser bias current, and supply voltage for proactive link management - Extended industrial temperature range of -40 to 85 degrees C for deployment in harsh environments including factory automation and outdoor installations - Hot-swappable SFP+ design with low power consumption for high-density industrial Ethernet applications - SFF-8431 and SFF-8432 SFP+ MSA compliant with full duplex operation at 10.3125 Gbps line rate -
Vendor:Blue Cable Co
SFP-10GLRLC-T-BCC | Moxa Compatible 10GB Single-Mode 10km (10GBASE-LR)
SFP-10GLRLC-T-BCC
In stock
Vendor:Blue Cable CoSFP-10GLRLC-T-BCC | Moxa Compatible 10GB Single-Mode 10km (10GBASE-LR)
The SFP-10GLRLC-T-BCC is a drop-in compatible replacement for the Moxa SFP-10GLRLC-T. This SFP+ transceiver operates plug-and-play in Moxa industrial Ethernet switches with 10G SFP+ ports. - IEEE 802.3ae 10GBASE-LR compliance guarantees interoperability with standards-based 10 Gigabit Ethernet infrastructure - SFP+ form factor, 10 Gbps data rate, single-mode fibre, 1310nm wavelength, up to 10km reach over OS2 SMF - Digital Diagnostic Monitoring (DOM) function provides real-time access to transceiver parameters including temperature, voltage, and optical power - LC duplex connector, hot-pluggable design for live insertion and removal without network interruption - Extended operating temperature range of -40 to 85°C makes this module suitable for harsh industrial environments and outdoor installations - SFF-8432 SFP+ MSA compliant, tested for compatibility with Moxa industrial switches and Ethernet platforms -
Vendor:Blue Cable Co
SFP-10GERLC-T-BCC | Moxa Compatible 10GB Single-Mode ER - 40km (10GBASE-ER)
SFP-10GERLC-T-BCC
In stock
Vendor:Blue Cable CoSFP-10GERLC-T-BCC | Moxa Compatible 10GB Single-Mode ER - 40km (10GBASE-ER)
The SFP-10GERLC-T-BCC is a drop-in compatible replacement for the Moxa SFP-10GERLC-T. This SFP+ transceiver delivers plug-and-play 10 Gigabit Ethernet over single-mode fibre for Moxa industrial switches requiring extended-reach connectivity. - IEEE 802.3ae 10GBASE-ER compliance guarantees interoperability with standards-based 10GbE equipment - SFP+ form factor, 10Gbps data rate, 1550nm wavelength, up to 40km reach on OS2 single-mode fibre - LC duplex connector, digital diagnostic monitoring (DOM) for real-time parameter visibility - Wide operating temperature range of -40 to 85 degrees Celsius for industrial deployments - Hot-swappable design and SFF-8432 MSA compliance for seamless integration into existing infrastructure
Trusted ICT Solutions Backed by 20+ Years of Expertise
At IP Trading, we specialise in delivering high-quality ICT products and solutions tailored to business, government, and enterprise needs. With over two decades of experience, we provide seamless procurement, expert support, and competitive pricing on a vast range of networking, security, server, storage, and power solutions. Our dedicated account managers ensure streamlined interactions with preferred vendors, eliminating time-consuming follow-ups while offering expert advice on project design, sourcing, and implementation.
Why Choose IP Trading?
We are a trusted supplier to Federal, State, and Local Government departments, Not-for-Profit organisations, and businesses of all sizes. Our team of experts in technical sales, logistics, finance, and account management ensures efficiency at every stage—from presales consultation to contract negotiation. As a registered supplier on the Australian Government’s DTA Hardware Marketplace and a prequalified ICT provider for NSW and QLD Government projects, we bring credibility and reliability to every transaction. Partner with IP Trading for flexible, innovative, and cost-effective ICT solutions tailored to your needs.