• JNP-QSFP-4X10GE-LR-BCC Blue Cable Co Juniper 40GB transceiver
1 1

Blue Cable Co

JNP-QSFP-4X10GE-LR-BCC | Juniper Compatible 40GB Single-Mode Breakout Transceiver - 10km (40GBASE-LR / 4x10GBASE-LR)

JNP-QSFP-4X10GE-LR-BCC | Juniper Compatible 40GB Single-Mode Breakout Transceiver - 10km (40GBASE-LR / 4x10GBASE-LR)

JNP-QSFP-4X10GE-LR-BCC

Stock Status: Enquire

$828.30 AUD
$828.30 AUD
$828.30 AUD
Sale Stock Status: Enquire
Taxes included. Shipping calculated at checkout.

Description

The JNP-QSFP-4X10GE-LR-BCC is a drop-in compatible replacement for the Juniper JNP-QSFP-4X10GE-LR. This QSFP+ transceiver enables plug-and-play 40G or 4x10G connectivity on Juniper platforms requiring 40GBASE-PLR4/PSM4 or 4x10GBASE-LR breakout capability. - IEEE 802.3ba 40GBASE-PSM4 and QSFP+ MSA compliance guarantees interoperability across vendor platforms and breakout cable compatibility - QSFP+ form factor with 40Gbps aggregate data rate over four independent 10Gbps lanes at 1310nm wavelength - Supports up to 10km reach over single-mode fibre (G.652) via MPO-12 connector - Can operate in native 40G mode or break out to four independent 10GBASE-LR interfaces using MTP/MPO-8 to 4xLC duplex breakout cables - Digital diagnostic monitoring (DOM) provides real-time visibility into optical power, temperature, bias current, and voltage per lane - Hot-swappable design with commercial temperature range (0 to 70°C) for flexible deployment in data centre and campus network environments

Features

• IEEE 802.3ba 40GBASE-PSM4 compliance ensures each of the four 10Gbps lanes meets 10GBASE-LR optical specifications, enabling native 40G links or breakout to four independent 10GBASE-LR SFP+ ports over the same transceiver and fibre infrastructure
• Four parallel DFB transmitters and PIN photodiode receivers operate independently at 1310nm, each lane supporting up to 11.2Gbps with CML electrical signalling for aggregate bandwidth up to 44.8Gbps
• 7dB minimum link budget per lane supports 10km reach over standard G.652 single-mode fibre, suitable for inter-building campus links, data centre interconnects, and metropolitan area network aggregation
• MPO-12 APC connector interface with 8 active fibres (4 Tx, 4 Rx) minimizes back-reflection and supports both native 40G parallel optics and 4x10G breakout via standard MTP/MPO-8 to 4xLC duplex OS2 breakout cables
• Per-lane digital diagnostics provide independent monitoring of transmit power, receive power, laser bias current, temperature, and supply voltage via I2C interface per SFF-8436, enabling proactive link troubleshooting and optical budget verification
• Hot-swappable QSFP+ form factor with 38-pin electrical interface per MSA allows installation and removal without system interruption, supporting flexible network topology changes and maintenance windows
• Maximum power consumption under 2.5W enables high-density 40G switch deployments without exceeding thermal envelopes in compact chassis designs

Warranty

5-Year Advanced Warranty on All Blue Cable Co® Products

Blue Cable Co® offers a comprehensive 5-Year Advanced Warranty on all our branded products. Our advanced warranty ensures fast, hassle-free replacements to keep your network running smoothly. If a fault occurs, we'll deliver a replacement part before you return the faulty itemminimising downtime and giving you complete peace of mind.

Choose Blue Cable Co® for reliable, high-quality network components backed by industry-leading warranty support.

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Technical Specifications

Alternate Part Codes

FAQs

Compatible SFP Selector

Technical Specifications

Brand: Blue Cable Co
BCC SKU: JNP-QSFP-4X10GE-LR-BCC
Compatible Replacement For: JNP-QSFP-4X10GE-LR
Compatibility: Juniper compatible
Lab Testing: Tested in Sydney, Australia
Warranty: 5-year advanced hardware replacement (Blue Cable Co)
Form Factor: QSFP+
Data Rate: 40Gbps aggregate (4x10Gbps per lane)
Wavelength: 1310nm (4x DFB lasers)
Fibre Type: Single-mode (SMF G.652)
Connector Type: MPO-12 (MTP/MPO)
Max Reach: Up to 10km (per datasheet, subject to fibre and link conditions)
DOM Support: Yes (per-lane monitoring)
Standards: IEEE 802.3ba 40GBASE-PSM4, QSFP+ MSA, SFF-8436, SFF-8636
Operating Temperature: 0°C to 70°C (commercial)
Breakout Support: 4x10GBASE-LR via external breakout cable

Alternate Part Codes

740-057315

FAQs

Q: Will this work in place of the Juniper JNP-QSFP-4X10GE-LR?
A: Yes. This transceiver is coded and tested for plug-and-play compatibility with the JNP-QSFP-4X10GE-LR. It meets IEEE 802.3ba 40GBASE-PSM4 specifications with the same QSFP+ form factor, 1310nm wavelength, 10km reach, and MPO-12 connector, ensuring it functions identically in Juniper platforms requiring this interface type.

Q: Which Juniper platforms support this transceiver?
A: This transceiver is compatible with Juniper switches and routers that support 40G QSFP+ interfaces and 40GBASE-PSM4 or 4x10GBASE-LR breakout modes. Compatibility depends on the platform having QSFP+ ports that recognize 1310nm parallel single-mode optics. Consult your platform documentation or contact us to confirm compatibility for your specific model and software version.

Q: What fibre and cable requirements are needed for 4x10G breakout mode?
A: For 4x10G breakout, you need an MTP/MPO-8 to 4xLC duplex breakout cable (often labelled 12-fibre MTP with 8 active fibres) and G.652 single-mode fibre. Each of the four 10G lanes requires a duplex LC connection, and your switch port must support breakout configuration. The switch interface must be configured to split the 40G QSFP+ port into four independent 10G interfaces, which is a software function on the host platform.

Q: What is the difference between 40GBASE-PSM4 and 40GBASE-LR4?
A: 40GBASE-PSM4 (Parallel Single-Mode) uses four parallel 1310nm lanes over an MPO-12 connector with 8 active fibres, allowing breakout to 4x10GBASE-LR. 40GBASE-LR4 uses four multiplexed wavelengths (around 1310nm) over a duplex LC connector on a single fibre pair and does not support 4x10G breakout. PSM4 provides flexibility for mixed 40G and 10G environments; LR4 is optimized for point-to-point 40G links.

Q: Can this transceiver be used without breakout cables in a native 40G link?
A: Yes. When connected with a standard 12-fibre MTP/MPO trunk cable to another 40GBASE-PSM4 transceiver, it operates as a native 40G link using all four lanes in parallel. The host platform treats it as a single 40G interface. Breakout mode is optional and requires both a breakout cable and switch configuration to enable the 4x10G split. Native 40G mode is simpler and ideal when you do not need 10G fanout.

Compatible SFP Selector

Need a Compatible SFP or QSFP Transceiver?

Use the Blue Cable Co Compatible SFP Selector to quickly filter by vendor compatibility, speed, form factor, fibre type, distance and connector and only see options that exist in our range.
Fully tested. No brand-tax. Sydney re-coding available if required.

Find Compatible Transceivers

100% Compatible With Equipment From Major Vendors

Coded & tested in our state of the art lab in Sydney

Silver-colored sfp-10g-sr-bcc transceiver module with a white label featuring blue and black text, designed for 850nm wavelength optical communication.
Blue Cable Co®
Cisco

  • Request for a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us