-
Vendor:Arista
Arista CAB-O-2Q-400G-2M | 400G OSFP to 2x 200G QSFP28 DAC Breakout Cable, 2M
CAB-O-2Q-400G-2M
Stock Status: Enquire
Vendor:AristaArista CAB-O-2Q-400G-2M | 400G OSFP to 2x 200G QSFP28 DAC Breakout Cable, 2M
The Arista CAB-O-2Q-400G-2M is a 2-metre passive Direct Attach Copper (DAC) breakout cable designed for high-density data centre interconnects. It splits a single 400GBASE-CR8 OSFP port into two independent 200GBASE-CR4 QSFP connections, each utilising 4 x 50G PAM-4 electrical lanes — ideal for spine-leaf fabric deployments where port density and cost efficiency are critical. The passive copper design eliminates active components, delivering ultra-low power consumption and latency compared to optical alternatives.
Fully MSA-compliant and hot-swappable, this cable integrates seamlessly with Arista's OSFP-based 400G switching platforms running EOS 4.23.0 or later. It is a cost-effective, plug-and-play solution for short-reach connections within the same rack or adjacent racks, eliminating the need for separate transceivers and patch cords. Buy today from iptrading.com.au — fast shipping and expert service across Australia. -
Vendor:Arista
Arista CAB-O-2Q-400G-1M | 400G OSFP to 2x 200G QSFP DAC Breakout Cable, 1m
CAB-O-2Q-400G-1M
Stock Status: Enquire
Vendor:AristaArista CAB-O-2Q-400G-1M | 400G OSFP to 2x 200G QSFP DAC Breakout Cable, 1m
The CAB-O-2Q-400G-1M is a 400G passive Direct Attach Copper (DAC) breakout cable designed for high-density data centre and high-performance computing environments. Featuring an OSFP connector on one end and two QSFP connectors on the other, it enables a single 400GBASE-CR8 port to break out into two independent 200GBASE-CR4 connections. Built on 8 x 50G PAM-4 electrical lanes, this passive twinax cable delivers reliable, low-latency interconnects without active components — minimising power consumption and heat in dense spine-leaf architectures.
Natively compatible with Arista EOS (minimum version 4.23.0) and Arista CloudVision, the cable offers plug-and-play operation across supported Arista platforms with zero additional configuration. Hot-swappable for maximum uptime, it is part of Arista's comprehensive 1G–400G copper and optical connectivity portfolio. Also available in 2M and 3M lengths. Order direct from iptrading.com.au — Australian-owned and operated since 2001. -
Vendor:Arista
Arista CAB-O-2Q-200G-3M | 200G OSFP to 2x 100G QSFP DAC Breakout Cable, 3m
CAB-O-2Q-200G-3M
Stock Status: Enquire
Vendor:AristaArista CAB-O-2Q-200G-3M | 200G OSFP to 2x 100G QSFP DAC Breakout Cable, 3m
The Arista CAB-O-2Q-200G-3M is a 200GBASE-CR8 passive twinax copper DAC breakout cable that splits a single OSFP 200G port into two 100GBASE-CR4 QSFP connections over a 3-metre length. Designed for high-density data centre environments, it enables cost-effective, low-power interconnects between Arista switches and server NICs or non-Arista equipment — eliminating the need for optical transceivers on short-range runs. Operating across 8 x 25G NRZ electrical lanes, it requires EOS 4.23.0 or later and complies with OSFP MSA standards.
This hot-swappable passive cable is ideal for breakout configurations where legacy 100G QSFP infrastructure must interoperate with newer 200G OSFP-equipped switches. EEPROMs are programmed for up to 25G NRZ data rates, ensuring seamless compatibility with existing NIC software. Available in 1m, 2m, and 3m variants to suit varied rack layouts. In stock and ready to ship from iptrading.com.au — order now for fast dispatch. -
Vendor:Arista
Arista CAB-O-2Q-200G-2M | 200G OSFP to 2x 100G QSFP Breakout DAC Cable, 2m
CAB-O-2Q-200G-2M
Stock Status: Enquire
Vendor:AristaArista CAB-O-2Q-200G-2M | 200G OSFP to 2x 100G QSFP Breakout DAC Cable, 2m
The Arista CAB-O-2Q-200G-2M is a 200GBASE-CR8 to 2x 100GBASE-CR4 passive Twinax Direct Attach Copper breakout cable designed for high-density data centre interconnects. It splits a single OSFP 200G port into two independent 100G QSFP ports, enabling seamless connectivity between next-generation Arista switches and servers or NICs equipped with legacy 100G QSFP interfaces — with zero active components and minimal latency.
Operating across 8x 25G NRZ electrical lanes, this 2-metre passive DAC requires no power conversion and supports hot-swapping for maximum uptime. Each connector includes an EEPROM programmed for 25G NRZ data rates to ensure full compatibility with legacy 100G and 25G equipment. Minimum EOS version 4.23.0 is required. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Arista
Arista CAB-O-2Q-200G-1M | 200G OSFP to 2x 100G QSFP DAC Breakout Cable, 1m
CAB-O-2Q-200G-1M
Stock Status: Enquire
Vendor:AristaArista CAB-O-2Q-200G-1M | 200G OSFP to 2x 100G QSFP DAC Breakout Cable, 1m
The Arista CAB-O-2Q-200G-1M is a 1-metre passive Twinax Direct Attach Copper (DAC) breakout cable designed for high-density, low-latency data centre interconnects. It splits a single 200GBASE-CR8 OSFP port into two 100GBASE-CR4 QSFP connections using 8 x 25G NRZ electrical lanes, enabling seamless migration from 200G Arista switch infrastructure to legacy 100G QSFP server or network equipment. Passive copper construction eliminates active components, minimising power consumption and signal latency — ideal for top-of-rack deployments where density and cost efficiency are priorities.
This cable is fully certified on Arista platforms running EOS 4.23.0 or later and integrates natively with CloudVision for centralised management. EEPROMs are pre-programmed to signal 25G NRZ data rates, ensuring compatibility with legacy NIC software and non-Arista 100G QSFP equipment. Hot-swappable and plug-and-play, it requires no additional configuration beyond correct port mode settings. In stock and ready to ship from iptrading.com.au — order now for fast dispatch. -
Vendor:Arista
Arista CAB-D-D-400G-3M | 400G QSFP-DD DAC Twinax Copper Cable, 3m, 8x50G
CAB-D-D-400G-3M
Stock Status: Enquire
Vendor:AristaArista CAB-D-D-400G-3M | 400G QSFP-DD DAC Twinax Copper Cable, 3m, 8x50G
The Arista CAB-D-D-400G-3M is a 400GBASE-CR8 passive Direct Attach Copper (DAC) cable delivering 400Gbps connectivity between two QSFP-DD ports over a 3-metre twinax copper link. Designed for high-density data centre interconnects, it uses 8 x 50Gb/s PAM-4 lanes to achieve full 400G bandwidth with no active components, keeping power consumption and cost well below optical alternatives. Ideal for top-of-rack and spine-leaf cabling within the same rack row or adjacent racks.
Fully plug-and-play with Arista EOS (4.23.0 and later) and CloudVision, the cable is hot-swappable and compliant with MSA open standards, ensuring broad interoperability across 400G QSFP-DD platforms. It is backed by Arista TAC support and a 1-year limited hardware warranty, with optional next-business-day advance replacement available. Order today at iptrading.com.au — your local source for enterprise-grade networking solutions. -
Vendor:Arista
Arista CAB-D-D-400G-2M | 400G QSFP-DD to QSFP-DD DAC Twinax Cable, 2m
CAB-D-D-400G-2M
Stock Status: Enquire
Vendor:AristaArista CAB-D-D-400G-2M | 400G QSFP-DD to QSFP-DD DAC Twinax Cable, 2m
The Arista CAB-D-D-400G-2M is a 400GBASE-CR8 passive Direct Attach Copper (DAC) Twinax cable designed for ultra-high-density, low-latency 400G interconnects in data centre environments. Terminated with QSFP-DD connectors on both ends, this 2-metre cable delivers 400 Gbps aggregate bandwidth across 8 lanes at 50G PAM4, making it ideal for spine-to-leaf, top-of-rack server connections, and high-performance compute clusters where short-reach copper is preferred over optical.
Natively compatible with Arista 400G platforms including the 7050X4, 7060X4, and 7300X3 series switches, this cable is fully compliant with the QSFP-DD MSA and IEEE 802.3bs standards. Passive copper construction eliminates the need for signal processing power, resulting in lower latency and lower power consumption compared to active optical alternatives. Buy today from iptrading.com.au — fast shipping and expert service across Australia. -
Vendor:Arista
Arista CAB-D-D-400G-1M | 400G QSFP-DD DAC Cable, 400GBASE-CR8, Passive Twinax, 1m
CAB-D-D-400G-1M
Stock Status: Enquire
Vendor:AristaArista CAB-D-D-400G-1M | 400G QSFP-DD DAC Cable, 400GBASE-CR8, Passive Twinax, 1m
The Arista CAB-D-D-400G-1M is a 400GBASE-CR8 passive Direct Attach Copper (DAC) cable delivering 400 Gigabit Ethernet connectivity between QSFP-DD ports over a 1-metre twinax copper assembly. Designed for high-density data centre spine-leaf architectures, it uses 8 x 50G PAM-4 electrical lanes to achieve 400G throughput with minimal latency and low power consumption — making it the cost-effective choice for within-rack and adjacent-rack server-to-switch or switch-to-switch interconnects.
Compliant with IEEE 802.3cd 400GBASE-CR8 and QSFP-DD MSA standards, the cable features 76-pin edge-type connectors and a hot-swappable form factor for maximum uptime and effortless servicing. Plug-and-play installation requires no additional configuration, and the passive copper design eliminates the need for active components. Buy today from iptrading.com.au — fast shipping and expert service across Australia. -
Vendor:Arista
Arista CAB-D-D-400-2.5 | 400G QSFP-DD Twinax DAC Cable, 400GBASE-CR8, 2.5m
CAB-D-D-400-2.5
Stock Status: Enquire
Vendor:AristaArista CAB-D-D-400-2.5 | 400G QSFP-DD Twinax DAC Cable, 400GBASE-CR8, 2.5m
The Arista CAB-D-D-400-2.5 is a 400GBASE-CR8 passive Twinax Direct Attach Copper (DAC) cable with QSFP-DD connectors on both ends, delivering 400 Gbps aggregate throughput via 8x 50Gbps PAM-4 electrical lanes. Purpose-built for short-reach data centre interconnects, it is ideal for rack-to-rack and top-of-rack 400G connections in high-density switching and high-performance computing environments. Its passive copper construction ensures ultra-low latency and minimal power consumption compared to active optical alternatives.
Compatible with Arista platforms supporting 400G QSFP-DD ports, this hot-swappable cable integrates seamlessly into Arista's 400GE optics, AOC, and cable ecosystem. The QSFP-DD form factor provides double-density port utilisation and straightforward field servicing without disrupting adjacent connections. Backed by a 1-Year Limited Hardware Warranty with optional advance replacement services. Upgrade your network with gear from iptrading.com.au — Australia's IT hardware specialists. -
Vendor:Arista
Arista CAB-D-8S-400G-2M | 400G QSFP-DD to 8x 50G SFP28 DAC Breakout Cable, 2m
CAB-D-8S-400G-2M
Stock Status: Enquire
Vendor:AristaArista CAB-D-8S-400G-2M | 400G QSFP-DD to 8x 50G SFP28 DAC Breakout Cable, 2m
The Arista CAB-D-8S-400G-2M is a 400GBASE-CR8 passive Direct Attach Copper (DAC) breakout cable designed for high-density data centre interconnects. It converts a single QSFP-DD 400G port into eight independent 50GBASE-CR SFP28 lanes, enabling cost-effective, low-latency server-to-switch and switch-to-switch connectivity at 2 metres. This passive twinax cable eliminates the need for optical transceivers, reducing power consumption and capital expenditure in spine-leaf and top-of-rack deployments.
Compatible with Arista 7000-series and 7500-series platforms, this breakout cable integrates seamlessly into Arista EOS-managed environments and supports automated provisioning workflows. It is ideal for hyperscale data centres, high-performance computing clusters, and any infrastructure requiring dense 50G server connectivity from a single 400G switch port. Visit iptrading.com.au to secure your order — enterprise-grade hardware with expert support. -
Vendor:Arista
Arista CAB-D-8S-400G-1M | 400G QSFP-DD to 8x 50G SFP DAC Breakout Cable, 1m
CAB-D-8S-400G-1M
Stock Status: Enquire
Vendor:AristaArista CAB-D-8S-400G-1M | 400G QSFP-DD to 8x 50G SFP DAC Breakout Cable, 1m
The Arista CAB-D-8S-400G-1M is a passive 400GBASE-CR8 QSFP-DD to 8x 50GBASE-CR SFP direct attach copper (DAC) breakout cable designed for high-density data centre interconnects. Spanning just 1 metre, it splits a single 400G QSFP-DD port into eight independent 50G SFP lanes using PAM-4 signalling — delivering near zero-latency and ultra-low power consumption without the cost of active optics. It is the ideal short-reach solution for within-rack and adjacent-rack deployments in SDN, machine learning, and cloud computing environments.
Built to QSFP-DD MSA, IEEE 802.3cd, and IEEE 802.3bj standards, this passive twinax cable also supports 8x 25G NRZ fanout for flexible deployment scenarios. The MSA-compliant 76-pin edge-type connector and TWI/I2C memory map ensure seamless integration with Arista platforms running EOS 4.23.0 or later. Available now at iptrading.com.au — competitive prices and local support. -
Vendor:Arista
Arista CAB-D-8S-400-2.5 | 400G QSFP-DD to 8x 50G SFP56 Breakout DAC Cable, 2.5m
CAB-D-8S-400-2.5
Stock Status: Enquire
Vendor:AristaArista CAB-D-8S-400-2.5 | 400G QSFP-DD to 8x 50G SFP56 Breakout DAC Cable, 2.5m
The Arista CAB-D-8S-400-2.5 is a 400GBASE-CR8 to 8x 50GBASE-CR passive Direct Attach Copper (DAC) breakout cable designed for high-density data centre interconnects. Running at 2.5 metres, this QSFP-DD to 8x SFP56 twinax cable delivers a cost-effective, low-latency solution for fanout connectivity between 400G spine switches and 50G server or leaf switch ports — ideal for Arista 7800, 7500, and 7300 series platforms. It eliminates the need for optics and transceivers, reducing both power consumption and total cost of ownership in large-scale fabric deployments.
This passive copper DAC cable is fully compliant with IEEE 802.3cd standards and supports plug-and-play installation with no additional configuration required. Compatible with Arista EOS-based switching platforms, it delivers consistent signal integrity across the full 2.5m reach. Buy today from iptrading.com.au — fast shipping and expert service across Australia. -
Vendor:Arista
Arista CAB-D-8S-200G-2M | 200G QSFP-DD to 8x 25G SFP DAC Breakout Cable, 2m
CAB-D-8S-200G-2M
Stock Status: Enquire
Vendor:AristaArista CAB-D-8S-200G-2M | 200G QSFP-DD to 8x 25G SFP DAC Breakout Cable, 2m
The Arista CAB-D-8S-200G-2M is a passive 200GBASE-CR8 Direct Attach Copper (DAC) breakout cable designed for high-density data centre connectivity. It features a single QSFP-DD connector on the host end and eight 25GBASE-CR SFP connectors on the device end, enabling a 200G port to fan out across eight 25G server NICs or legacy SFP devices. With eight 25G NRZ electrical lanes, no active components, and zero additional power draw, this cable is the cost-effective choice for top-of-rack server connectivity on Arista platforms running EOS 4.23.0 or later.
Fully certified on all supported Arista switches and integrated with EOS and CloudVision, this cable is plug-and-play and hot-swappable. It is EEPROM-programmed for up to 25G NRZ data rates, ensuring broad compatibility with legacy 100G QSFP and 25G SFP infrastructure. Part of Arista's comprehensive 1G to 400G cable portfolio, the CAB-D-8S-200G-2M is available in 1m, 2m, 2.5m and 3m variants. Visit iptrading.com.au to secure your order — enterprise-grade hardware with expert support. -
Vendor:Arista
Arista CAB-D-8S-200G-1M | 200G QSFP-DD to 8x 25G SFP Breakout DAC Cable, 1m
CAB-D-8S-200G-1M
Stock Status: Enquire
Vendor:AristaArista CAB-D-8S-200G-1M | 200G QSFP-DD to 8x 25G SFP Breakout DAC Cable, 1m
The Arista CAB-D-8S-200G-1M is a 200GBASE-CR8 passive twinax copper breakout DAC cable designed for high-density data centre deployments. It splits a single QSFP-DD port operating at 200G (8 x 25G NRZ lanes) into eight individual 25GBASE-CR SFP connections over a 1-metre length — enabling direct, low-latency connectivity between spine or leaf switches and servers equipped with 25G SFP NICs. The passive copper design eliminates active components, reducing cost and power consumption while maintaining full signal integrity at short reach.
This breakout cable is ideal for bridging high-speed Arista switching infrastructure with legacy 25G server NICs, supporting interoperability with 100G QSFP and 25G SFP environments. Each SFP connector EEPROM is programmed for 25G NRZ data rates, ensuring compatibility with legacy NIC software. Fully certified on applicable Arista platforms, it operates plug-and-play with Arista EOS 4.23.0 or later and integrates seamlessly with CloudVision. Backed by Arista's 1-year limited hardware warranty. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Arista
Arista CAB-D-8S-200-2.5 | 200G QSFP-DD to 8x 25G SFP DAC Breakout Cable, 2.5m
CAB-D-8S-200-2.5
Stock Status: Enquire
Vendor:AristaArista CAB-D-8S-200-2.5 | 200G QSFP-DD to 8x 25G SFP DAC Breakout Cable, 2.5m
The Arista CAB-D-8S-200-2.5 is a passive 200GBASE-CR8 QSFP-DD to 8 x 25GBASE-CR SFP Twinax Direct Attach Copper (DAC) breakout cable, delivering 200Gbps aggregate bandwidth across a 2.5-metre copper interconnect. Designed for data centre spine-leaf architectures and high-density server connectivity, this cable splits a single 200G QSFP-DD port into eight independent 25G SFP connections — enabling flexible, cost-effective short-reach cabling without the complexity or cost of optical transceivers. Compliant with QSFP-DD MSA, IEEE 802.3bs, and CMIS 4.0 standards, it is fully validated for use with Arista EOS 4.23.0 and later.
As a passive cable assembly, the CAB-D-8S-200-2.5 draws minimal power (~0.1W per end) and requires no active components, simplifying deployment and reducing operational overhead. Its EEPROM is programmed to signal 25G NRZ format for seamless compatibility with legacy NICs and SFP-based switches. Hot-swappable and pre-terminated for plug-and-play installation, this cable suits high-performance computing aggregation, ToR switch-to-server links, and dense leaf-spine fabrics. Buy today from iptrading.com.au — fast shipping and expert service across Australia. -
Vendor:Arista
Arista CAB-D-4Q-400G-3M | 400G QSFP-DD to 4x 100G QSFP DAC Breakout Cable, 3m
CAB-D-4Q-400G-3M
Stock Status: Enquire
Vendor:AristaArista CAB-D-4Q-400G-3M | 400G QSFP-DD to 4x 100G QSFP DAC Breakout Cable, 3m
The Arista CAB-D-4Q-400G-3M is a 400GBASE-CR8 to 4x 100GBASE-CR2 QSFP-DD breakout direct-attach copper (DAC) twinax cable designed for high-density data centre interconnects. This 3-metre passive copper assembly breaks a single 400G QSFP-DD port out into four independent 100G QSFP28 connections, making it ideal for spine-to-leaf cabling, top-of-rack deployments, and migration scenarios where 100G servers or downstream switches need to connect to a 400G-capable spine switch or router.
Engineered for compatibility with Arista 400G-capable platforms — including the 7800, 7500R3, 7300X3, and 7050X4 series — this passive DAC cable delivers low latency and power-efficient connectivity without the cost of optical transceivers. The twinax construction provides reliable signal integrity over the 3-metre reach suited to intra-rack and adjacent-rack runs. Need it fast? iptrading.com.au delivers across Australia — shop now.
Trusted ICT Solutions Backed by 20+ Years of Expertise
At IP Trading, we specialise in delivering high-quality ICT products and solutions tailored to business, government, and enterprise needs. With over two decades of experience, we provide seamless procurement, expert support, and competitive pricing on a vast range of networking, security, server, storage, and power solutions. Our dedicated account managers ensure streamlined interactions with preferred vendors, eliminating time-consuming follow-ups while offering expert advice on project design, sourcing, and implementation.
Why Choose IP Trading?
We are a trusted supplier to Federal, State, and Local Government departments, Not-for-Profit organisations, and businesses of all sizes. Our team of experts in technical sales, logistics, finance, and account management ensures efficiency at every stage—from presales consultation to contract negotiation. As a registered supplier on the Australian Government’s DTA Hardware Marketplace and a prequalified ICT provider for NSW and QLD Government projects, we bring credibility and reliability to every transaction. Partner with IP Trading for flexible, innovative, and cost-effective ICT solutions tailored to your needs.