-
Vendor:Arista
Arista CAB-D-4Q-400G-2M | 400G QSFP-DD to 4x 100G QSFP DAC Breakout Cable, 2m
CAB-D-4Q-400G-2M
Stock Status: Enquire
Vendor:AristaArista CAB-D-4Q-400G-2M | 400G QSFP-DD to 4x 100G QSFP DAC Breakout Cable, 2m
The CAB-D-4Q-400G-2M is a 400GBASE-CR8 passive direct attach copper (DAC) breakout cable designed for high-density data centre interconnects, splitting a single QSFP-DD 400G port into four independent 100GBASE-CR2 QSFP ports over a 2-metre run. Built on 8 x 50G PAM-4 electrical lanes at the QSFP-DD end — with each QSFP breakout utilising 2 x 50G PAM-4 lanes — it delivers full 400G aggregate bandwidth with zero active components, minimising power draw and heat load in tightly packed spine-leaf and top-of-rack deployments.
As part of Arista's 400G QSFP-DD Twinax Copper Cable series, the CAB-D-4Q-400G-2M integrates seamlessly with Arista EOS (minimum version 4.23.0) and CloudVision for plug-and-play operation with no additional configuration. The passive copper construction ensures reliability and cost efficiency for short-reach intra-rack and inter-rack connections. Hot-swappable for minimal service disruption. Available in multiple lengths including 1m, 2.5m, and 3m to suit varied rack configurations. Contact iptrading.com.au — your local source for enterprise-grade networking solutions. -
Vendor:Arista
Arista CAB-D-4Q-400G-1M | 400G QSFP-DD to 4x 100G QSFP Breakout DAC Cable, 1m
CAB-D-4Q-400G-1M
Stock Status: Enquire
Vendor:AristaArista CAB-D-4Q-400G-1M | 400G QSFP-DD to 4x 100G QSFP Breakout DAC Cable, 1m
The Arista CAB-D-4Q-400G-1M is a 400GBASE-CR8 to 4x 100GBASE-CR2 QSFP-DD breakout direct attach copper (DAC) twinax cable designed for high-density data centre interconnects. This 1-metre passive copper cable enables a single 400G QSFP-DD port to fan out into four independent 100G QSFP connections, making it ideal for spine-to-leaf cabling, server connectivity, and top-of-rack deployments where port density and cable management are critical. Built to industry-standard CR8/CR2 electrical specifications, it delivers low-latency, high-bandwidth connectivity without the cost or complexity of optical transceivers.
Engineered for compatibility with Arista 7000-Series and other QSFP-DD-capable platforms, this passive DAC assembly consumes minimal power and eliminates the need for optical-to-electrical conversion. The 1-metre length suits in-rack or short inter-rack runs in structured data centre environments. Available now at iptrading.com.au — competitive prices and local support. -
Vendor:Arista
Arista CAB-D-4Q-400-2.5 | 400G QSFP-DD to 4x 100G QSFP DAC Breakout Cable, 2.5m
CAB-D-4Q-400-2.5
Stock Status: Enquire
Vendor:AristaArista CAB-D-4Q-400-2.5 | 400G QSFP-DD to 4x 100G QSFP DAC Breakout Cable, 2.5m
The Arista CAB-D-4Q-400-2.5 is a 400GBASE-CR8 passive Twinax Direct Attach Copper (DAC) breakout cable designed for high-density data centre interconnects. It splits a single QSFP-DD 400G port into four 100GBASE-CR2 QSFP ports across 2.5 metres, delivering cost-effective, low-power 400G-to-4x100G breakout connectivity for rack-to-rack and top-of-rack deployments. With 8x 50G PAM-4 signalling lanes and MSA compliance, it integrates seamlessly into modern spine-leaf architectures.
As a passive copper cable, the CAB-D-4Q-400-2.5 requires no additional power, is hot-swappable for minimal downtime, and supports interoperability with existing 100G QSFP infrastructure — making it an ideal migration tool for networks scaling to 400G. Compatible with Arista EOS 4.23.0 and later, it forms part of Arista's comprehensive optics portfolio spanning 1G to 400GE. Order today from iptrading.com.au — your local source for enterprise-grade networking solutions. -
Vendor:Arista
Arista CAB-D-4Q-200G-2M | 200G QSFP-DD to 4x 50G QSFP DAC Breakout Cable, 2m
CAB-D-4Q-200G-2M
Stock Status: Enquire
Vendor:AristaArista CAB-D-4Q-200G-2M | 200G QSFP-DD to 4x 50G QSFP DAC Breakout Cable, 2m
The CAB-D-4Q-200G-2M is a 2-metre passive Twinax Direct Attach Copper (DAC) breakout cable that splits a single 200GBASE-CR8 QSFP-DD port into four independent 50GBASE-CR2 QSFP connections across 8 x 25G NRZ electrical lanes. Designed for high-density data centre deployments, it delivers low-latency, low-power interconnects between spine/leaf switches and servers without the cost or complexity of optical transceivers. Fully certified and tested on Arista platforms, it integrates seamlessly with Arista EOS (4.23.0+) and CloudVision for unified management.
This passive copper cable supports interoperability with legacy 100G QSFP and 25G SFP infrastructure, and its EEPROMs are programmed to ensure compatibility with legacy NICs operating at up to 25G NRZ. Available in 1M, 2M, and 3M variants within the CAB-D-4Q-200G series, making it a flexible choice for varying rack and row distances. Backed by Arista's 1-Year Limited Hardware Warranty with optional Next Business Day and 4-Hour Advance Hardware Replacement services. Order direct from iptrading.com.au — Australian-owned and operated since 2001. -
Vendor:Arista
Arista CAB-D-4Q-200G-1M | 200G QSFP-DD to 4x 50G QSFP Breakout DAC Cable, 1m
CAB-D-4Q-200G-1M
Stock Status: Enquire
Vendor:AristaArista CAB-D-4Q-200G-1M | 200G QSFP-DD to 4x 50G QSFP Breakout DAC Cable, 1m
The CAB-D-4Q-200G-1M is a 1-metre passive Twinax copper breakout DAC cable designed for high-density 200G data centre interconnects. It splits a single 200GBASE-CR8 QSFP-DD port into four independent 50GBASE-CR2 QSFP connections, operating across 8 x 25G NRZ electrical lanes — delivering wire-speed performance with no active components, minimal latency, and near-zero power overhead. Purpose-built for Arista switching platforms running EOS 4.23.0 or later, it is ideal for connecting spine or leaf switches to server NICs or legacy 100G/25G infrastructure.
As a passive direct attach cable, the CAB-D-4Q-200G-1M is hot-swappable and certified across all supporting Arista platforms, with EEPROMs pre-programmed for 25Gb/s NRZ compatibility to ensure seamless interoperability with existing 100G QSFP and 25G SFP deployments. Available within a family spanning 1m, 2m, and 2.5m lengths, it provides flexible rack-scale cabling options. Order direct from iptrading.com.au — Australian-owned and operated since 2001. -
Vendor:Arista
Arista CAB-D-4Q-200-2.5 | 200G QSFP-DD to 4x 50G QSFP DAC Breakout Cable, 2.5m
CAB-D-4Q-200-2.5
Stock Status: Enquire
Vendor:AristaArista CAB-D-4Q-200-2.5 | 200G QSFP-DD to 4x 50G QSFP DAC Breakout Cable, 2.5m
The Arista CAB-D-4Q-200-2.5 is a 200GBASE-CR8 passive twinax copper DAC breakout cable designed for high-density data centre interconnects. It splits a single QSFP-DD port (200G via 8x25G NRZ lanes) into four 50GBASE-CR2 QSFP ports, enabling top-of-rack and rack-to-rack cabling at 2.5 metres with minimal latency and power overhead. Ideal for connecting spine-and-leaf architectures, servers, and storage nodes where short-reach, high-bandwidth connectivity is critical.
As a passive twinax copper cable, it requires no additional power, drivers, or software configuration beyond Arista EOS 4.23.0 or later. The plug-and-play, hot-swappable design simplifies deployment and maintenance, while MSA-compliant construction supports interoperability with legacy 100G QSFP and 25G SFP environments. Need it fast? iptrading.com.au delivers across Australia — shop now. -
Vendor:Arista
Arista CAB-D-2Q-400G-3M | 400G QSFP-DD to 2x 200G QSFP DAC Breakout Cable, 3m
CAB-D-2Q-400G-3M
Stock Status: Enquire
Vendor:AristaArista CAB-D-2Q-400G-3M | 400G QSFP-DD to 2x 200G QSFP DAC Breakout Cable, 3m
The Arista CAB-D-2Q-400G-3M is a passive Direct Attach Copper (DAC) breakout cable designed for high-density data centre interconnects, splitting a single 400GBASE-CR8 QSFP-DD port into two independent 200GBASE-CR4 QSFP ports over 3 metres of twinax copper. Ideal for spine-leaf architecture upgrades and within-rack cabling, it delivers cost-effective, low-power connectivity without active components — reducing both capital and operational expenditure in 400G deployments.
Built to SFF-8679, QSFP-DD MSA, IEEE 802.3bj, and IEEE 802.3cd standards, this cable is compatible with Arista switches, servers, and host adapters running EOS 4.23.0 or later. The hot-swappable design ensures minimal disruption during servicing. In stock and ready to ship from iptrading.com.au — order now for fast dispatch. -
Vendor:Arista
Arista CAB-D-2Q-400G-2M | 400G QSFP-DD to 2x 200G QSFP DAC Breakout Cable, 2m
CAB-D-2Q-400G-2M
Stock Status: Enquire
Vendor:AristaArista CAB-D-2Q-400G-2M | 400G QSFP-DD to 2x 200G QSFP DAC Breakout Cable, 2m
The Arista CAB-D-2Q-400G-2M is a 400G passive Direct Attach Copper (DAC) breakout cable designed for high-density data centre deployments. It splits a single 400GBASE-CR8 QSFP-DD port into two independent 200GBASE-CR4 QSFP connections using twin-ax passive copper construction, leveraging 8 x 50G PAM-4 electrical lanes on the QSFP-DD side and 4 x 50G PAM-4 lanes per QSFP breakout. At 2 metres, it is ideal for rack-to-rack and top-of-rack interconnects where cost-efficient, low-latency 400G breakout connectivity is required.
As a passive DAC cable, the CAB-D-2Q-400G-2M requires no active components, resulting in minimal power consumption and simplified deployment. It integrates natively with Arista EOS (minimum version 4.23.0) and CloudVision for seamless management, is hot-swappable for maximum uptime, and complies with industry open standards for broad interoperability. Part of Arista's comprehensive 400GE copper and optical connectivity portfolio, this cable is fully backed by Arista Support. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Arista
Arista CAB-D-2Q-400G-1M | 400G QSFP-DD to 2x 200G QSFP DAC Breakout Cable, 1M
CAB-D-2Q-400G-1M
Stock Status: Enquire
Vendor:AristaArista CAB-D-2Q-400G-1M | 400G QSFP-DD to 2x 200G QSFP DAC Breakout Cable, 1M
The Arista CAB-D-2Q-400G-1M is a passive Direct Attach Copper (DAC) breakout cable delivering 400GBASE-CR8 connectivity via a QSFP-DD connector on one end, splitting to two 200GBASE-CR4 QSFP ports on the other. Purpose-built for high-density data centre interconnects, this 1-metre cable is ideal for top-of-rack cabling between Arista 400G spine switches and 200G leaf or server nodes — eliminating the need for optical transceivers and reducing both cost and power consumption in short-reach deployments.
Fully compatible with Arista 7000 Series switches and other QSFP-DD/QSFP100 platforms, this cable supports breakout configurations that maximise port density without sacrificing throughput. The passive copper design delivers ultra-low latency and reliable signal integrity at 1-metre reach. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Arista
Arista CAB-D-2Q-400-2.5 | 400G QSFP-DD to 2x 200G QSFP DAC Breakout Cable, 2.5m
CAB-D-2Q-400-2.5
Stock Status: Enquire
Vendor:AristaArista CAB-D-2Q-400-2.5 | 400G QSFP-DD to 2x 200G QSFP DAC Breakout Cable, 2.5m
The Arista CAB-D-2Q-400-2.5 is a passive 400GBASE-CR8 to 2x 200GBASE-CR4 Direct Attach Copper (DAC) breakout cable designed for high-density data centre and HPC interconnects. It splits a single 400G QSFP-DD port into two independent 200G QSFP56 connections over 2.5 metres of twinax copper, supporting PAM4 signalling at 2x 200 Gbps — ideal for top-of-rack and adjacent-rack deployments where low latency and minimal power draw are priorities.
Compliant with the QSFP-DD MSA and IEEE 802.3cd standards, this passive copper cable integrates seamlessly with Arista EOS and CloudVision for plug-and-play operation with no optics qualification cycles required. It also supports 2x 100G NRZ fanout applications, adding deployment flexibility. Hot-swappable and built to 28 AWG, it delivers a cost-effective short-reach solution backed by Arista's hardware warranty. Order today from iptrading.com.au — your local source for enterprise-grade networking solutions. -
Vendor:Arista
Arista CAB-D-2Q-200G-2M | 200G QSFP-DD to 2x 100G QSFP DAC Breakout Cable, 2m
CAB-D-2Q-200G-2M
Stock Status: Enquire
Vendor:AristaArista CAB-D-2Q-200G-2M | 200G QSFP-DD to 2x 100G QSFP DAC Breakout Cable, 2m
The Arista CAB-D-2Q-200G-2M is a passive 200G Direct Attach Copper (DAC) breakout cable designed to connect a single QSFP-DD 200G port to two 100GBASE-CR4 QSFP devices over 2 metres. Operating across 8 x 25G NRZ electrical lanes, it enables seamless migration from legacy 100G QSFP infrastructure to modern 200G QSFP-DD switching fabrics — making it ideal for data centre environments where Arista QSFP-DD switches need to interconnect with existing 100G servers, NICs, or top-of-rack equipment without costly upgrades.
As a fully passive copper cable with no active components, the CAB-D-2Q-200G-2M delivers low power consumption and reliable short-reach connectivity. It is EEPROM-programmed for compatibility with legacy NIC software that recognises 25G NRZ DAC rates, and is fully certified across Arista platforms running EOS 4.23.0 or later. Hot-swappable and MSA-compliant, it integrates natively with Arista EOS for plug-and-play deployment. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Arista
Arista CAB-D-2Q-200G-1M | 200G QSFP-DD to 2x 100G QSFP CR4 DAC Cable, 1m
CAB-D-2Q-200G-1M
Stock Status: Enquire
Vendor:AristaArista CAB-D-2Q-200G-1M | 200G QSFP-DD to 2x 100G QSFP CR4 DAC Cable, 1m
The Arista CAB-D-2Q-200G-1M is a 200GBASE-CR8 direct attach copper (DAC) breakout cable designed for high-density data centre interconnects. It connects a single 200G QSFP-DD port to two 100GBASE-CR4 QSFP28 ports, enabling flexible port breakout and bandwidth aggregation between top-of-rack switches, spine-leaf fabrics, and server clusters. At just 1 metre, it is ideal for within-rack or adjacent-rack deployments where passive copper cabling delivers low latency and zero power consumption at the transceiver level.
This twinax passive copper cable is fully compatible with Arista 7000-series switches and other QSFP-DD/QSFP28 platforms that support 200G breakout configurations. It eliminates the cost and complexity of optical transceivers for short-reach connections, making it a practical choice for hyperscale and enterprise data centre builds. Order direct from iptrading.com.au — Australian-owned and operated since 2001. -
Vendor:Arista
Arista CAB-D-2Q-200-2.5 | 200G QSFP-DD to 2x 100G QSFP Breakout DAC, 2.5m
CAB-D-2Q-200-2.5
Stock Status: Enquire
Vendor:AristaArista CAB-D-2Q-200-2.5 | 200G QSFP-DD to 2x 100G QSFP Breakout DAC, 2.5m
The Arista CAB-D-2Q-200-2.5 is a passive twinax copper breakout Direct Attach Cable (DAC) designed for high-density data centre interconnects. It splits a single 200GBASE-CR8 QSFP-DD port into two independent 100GBASE-CR4 QSFP links over 2.5 metres, enabling flexible 2×100G breakout connectivity with ultra-low latency and zero active components. Ideal for spine-leaf architectures, server-to-switch links, and high-throughput data centre fabric deployments running Arista EOS 4.23.0 or later.
As a passive copper DAC, this cable requires no power beyond the host port, consumes minimal energy, and is fully hot-swappable for seamless maintenance. It complies with QSFP-DD MSA and IEEE 802.3 standards, ensuring broad compatibility across Arista switches, routers, and servers. In stock and ready to ship from iptrading.com.au — order now for fast dispatch. -
Vendor:Arista
Arista AOC-S-S-25G-7M | 25GbE SFP28 Active Optical Cable, 7m, MMF, 850nm
AOC-S-S-25G-7M
Stock Status: Enquire
Vendor:AristaArista AOC-S-S-25G-7M | 25GbE SFP28 Active Optical Cable, 7m, MMF, 850nm
The Arista AOC-S-S-25G-7M is a 25GbE SFP28-to-SFP28 Active Optical Cable delivering 25 Gbps over 7 metres of multi-mode fibre — purpose-built for high-density data centre interconnects within and between adjacent racks. Operating at 850nm with sub-1W power consumption, it offers a cost-efficient, lightweight alternative to discrete transceivers and patch cables, making it ideal for spine-leaf architectures, top-of-rack switching, HPC environments, and network storage deployments.
Compliant with SFF-8432 SFP28 MSA standards, this hot-pluggable AOC integrates seamlessly into Arista switching platforms and other SFP28-compatible equipment. Its all-in-one optical design simplifies cabling, reduces rack weight, and eliminates the need for separate transceiver pairs. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Arista
Arista AOC-S-S-25G-5M | 25G SFP28 AOC, Active Optical Cable, 5m, MMF 850nm
AOC-S-S-25G-5M
Stock Status: Enquire
Vendor:AristaArista AOC-S-S-25G-5M | 25G SFP28 AOC, Active Optical Cable, 5m, MMF 850nm
The Arista AOC-S-S-25G-5M is a 25GbE SFP28 to SFP28 Active Optical Cable delivering 25 Gbps over 5 metres of multimode fibre at 850nm. Designed for high-density data centre and HPC interconnects, this pre-terminated, plug-and-play assembly eliminates the need for separate transceivers and patch cables. Full system-level qualification by Arista — including optical, electrical, voltage, and temperature stress testing — ensures guaranteed interoperability with Arista 7050SX3, 7260CX3, and related switch platforms.
Supporting Digital Optical Monitoring (DOM) for real-time visibility into temperature, voltage, and optical levels, the AOC-S-S-25G-5M simplifies ongoing cable plant management. FEC is disabled by default, consistent with Arista's 25G AOC specification. Compliant with industry MSA standards, this cable is part of Arista's broad 1G–400G connectivity portfolio spanning 3m through 30m reach options. Visit iptrading.com.au to secure your order — enterprise-grade hardware with expert support. -
Vendor:Arista
Arista AOC-S-S-25G-3M | 25GbE SFP28 Active Optical Cable, 3m, MMF, 850nm
AOC-S-S-25G-3M
Stock Status: Enquire
Vendor:AristaArista AOC-S-S-25G-3M | 25GbE SFP28 Active Optical Cable, 3m, MMF, 850nm
The Arista AOC-S-S-25G-3M is a 25GbE SFP28-to-SFP28 Active Optical Cable (AOC) delivering 25 Gb/s over 3 metres of multi-mode fibre at 850nm — ideal for high-density data centre top-of-rack and inter-switch interconnects. Unlike passive copper DACs, the embedded active optical transceivers provide superior signal integrity, eliminate electromagnetic interference, and reduce cable bulk, making them the preferred choice for high-speed, short-reach connectivity in modern data centre fabrics.
Designed and programmed specifically for Arista Networks platforms, this plug-and-play cable requires no field termination and draws less than 1W per end — ensuring energy-efficient operation across large-scale deployments. Compatible with Arista switches supporting 25GBase-AOC, it integrates seamlessly into spine-leaf architectures and high-performance computing environments. Order direct from iptrading.com.au — Australian-owned and operated since 2001.
Trusted ICT Solutions Backed by 20+ Years of Expertise
At IP Trading, we specialise in delivering high-quality ICT products and solutions tailored to business, government, and enterprise needs. With over two decades of experience, we provide seamless procurement, expert support, and competitive pricing on a vast range of networking, security, server, storage, and power solutions. Our dedicated account managers ensure streamlined interactions with preferred vendors, eliminating time-consuming follow-ups while offering expert advice on project design, sourcing, and implementation.
Why Choose IP Trading?
We are a trusted supplier to Federal, State, and Local Government departments, Not-for-Profit organisations, and businesses of all sizes. Our team of experts in technical sales, logistics, finance, and account management ensures efficiency at every stage—from presales consultation to contract negotiation. As a registered supplier on the Australian Government’s DTA Hardware Marketplace and a prequalified ICT provider for NSW and QLD Government projects, we bring credibility and reliability to every transaction. Partner with IP Trading for flexible, innovative, and cost-effective ICT solutions tailored to your needs.