-
Vendor:ATEN
ATEN PE8324G3-AT | NRGence eco 24-Outlet Switched PDU, 32A IEC 60309, Zero-U, C13/C19
PE8324G3-AT
Stock Status: Enquire
Vendor:ATENATEN PE8324G3-AT | NRGence eco 24-Outlet Switched PDU, 32A IEC 60309, Zero-U, C13/C19
The ATEN PE8324G3 is an intelligent Zero-U rack PDU from the NRGence eco series, delivering outlet-level remote switching and real-time power metering across 24 AC outlets (21 x IEC320 C13 + 3 x IEC320 C19) via a 32A IEC 60309 input at 100–240 VAC. Designed for data centre and server room environments, it enables IT managers to remotely power on, off, or cycle individual outlets over TCP/IP, monitor per-outlet current, voltage, power, and watt-hour consumption, and configure automated on/off schedules — all from a browser-based interface or SNMP-capable management platform.
The PE8324G3 goes beyond basic switching with Proactive Overload Protection (POP), which automatically sheds the lowest-priority outlet to prevent circuit trips, and supports power-on sequencing to safely stage server boot sequences. Two 16A circuit breakers, 128-bit SSL encryption, 802.1x RADIUS authentication, and IP/MAC filtering ensure secure, enterprise-grade operation. External temperature and humidity sensor ports extend visibility to the physical environment, and full integration with ATEN NRGence eco DC software enables centralised multi-device energy and DCIM management. Order direct from iptrading.com.au — Australian-owned and operated since 2001. -
Vendor:ATEN
ATEN PE8324G2-AT | NRGence eco PDU 24-Outlet Switched & Metered, IEC 60309 32A, 0U
PE8324G2-AT
Stock Status: Enquire
Vendor:ATENATEN PE8324G2-AT | NRGence eco PDU 24-Outlet Switched & Metered, IEC 60309 32A, 0U
The ATEN PE8324G2 is an intelligent 0U rack PDU delivering outlet-level metering and switching across 24 AC outlets, purpose-built for data centre power optimisation. Accepting an IEC 60309 32A input at 100–240 VAC, it provides real-time current, voltage, power, and energy monitoring at PDU, bank, and individual outlet level — giving IT and facilities teams granular visibility and remote control over every connected device via TCP/IP. Proactive Overload Protection (POP) automatically sheds load before breakers trip, while configurable power-on sequencing and scheduling reduce inrush and enable automated energy management.
As part of ATEN's NRGence green energy ecosystem, the PE8324G2 integrates with NRGence eco DC DCIM and CC2000 for enterprise-wide power analysis, department-level reporting, and multi-site management. Security is enterprise-grade with SNMP V1/V2/V3, RADIUS, 128-bit SSL, and IP/MAC filtering. Up to 4 environmental sensor ports enable temperature and humidity monitoring directly from the PDU. Contact iptrading.com.au — your local source for enterprise-grade networking solutions. -
Vendor:ATEN
ATEN BP72V18AH-AT | External Battery Pack, 72V/18Ah, 2U Rack/Tower, for OL3000LV/OL3000HV
BP72V18AH-AT
Stock Status: Enquire
Vendor:ATENATEN BP72V18AH-AT | External Battery Pack, 72V/18Ah, 2U Rack/Tower, for OL3000LV/OL3000HV
The ATEN BP72V18AH is a 2U rack/tower external battery pack engineered to extend the runtime of ATEN OL3000LV and OL3000HV online UPS systems. Housing 12 sealed lead-acid batteries at a nominal 72V/18Ah, it provides critical extra runtime during unexpected power outages — giving teams the time needed to save data and safely shut down systems. Its compact 2U chassis supports both rack-mount and tower deployment, making it equally suited to data centre racks and server room floor installations.
Compatible exclusively with the ATEN OL3000LV and OL3000HV UPS models, the BP72V18AH ships complete with a rack mounting kit, rail slide kit, battery cable, and tower extend stand for flexible installation. Rated for operating temperatures of 0°C–40°C and elevations up to 3,000 m, it meets cTUVus and RoHS certifications. Buy today from iptrading.com.au — fast shipping and expert service across Australia. -
Vendor:ATEN
ATEN VE170-AT-U | VGA/Audio Cat 5 AV Extender Kit, 300m, 1080p, Tx+Rx
VE170-AT-U
Stock Status: Enquire
Vendor:ATENATEN VE170-AT-U | VGA/Audio Cat 5 AV Extender Kit, 300m, 1080p, Tx+Rx
The ATEN VE170 VGA/Audio Cat 5 AV Extender Kit delivers reliable long-distance AV signal extension over a single Cat 5e cable, making it ideal for digital signage, classrooms, boardrooms, and large-venue installations. This complete transmitter and receiver kit (VE170T + VE170R) supports resolutions up to 1920x1200 at close range and maintains 1024x768 at distances up to 300 m (1000 ft), with adjustable gain control to fine-tune signal strength at the receiver end. Built-in ESD protection (8KV/15KV) and a rugged metal housing ensure dependable, long-term operation in professional environments.
The VE170 supports one local and one remote VGA display simultaneously, allowing the source to feed both the transmitter-side monitor and the remote screen without additional splitters. Mono audio is carried over the same Cat 5e run, eliminating the need for separate audio cabling. Plug-and-play installation requires no software or drivers, and the units are compatible with ATEN VS1204T/VS1208T A/V Over Cat 5 Splitters for scalable multi-zone deployments. Note: this kit includes the standard VE170R receiver without Deskew correction. Available now at iptrading.com.au — competitive prices and local support. -
Vendor:ATEN
ATEN VS1204T-AT-U | 4-Port VGA/Audio Cat 5 Splitter, 300m Extension, 1U Rack
VS1204T-AT-U
Stock Status: Enquire
Vendor:ATENATEN VS1204T-AT-U | 4-Port VGA/Audio Cat 5 Splitter, 300m Extension, 1U Rack
The ATEN VS1204T is a 4-port VGA/audio Cat 5 splitter and A/V extender designed for professional installations that need to deliver multimedia content from a single source to up to four remote displays simultaneously. Using standard Cat 5e cable, it extends VGA and mono audio signals up to 300 m (1000 ft) from the source while maintaining resolutions up to 1920 x 1200 @ 60 Hz — making it ideal for digital signage, lecture halls, control rooms, and corporate AV environments.
The VS1204T supports a local display alongside four remote outputs, with a 225 MHz bandwidth ceiling and built-in 8KV/15KV ESD protection for reliable operation in demanding environments. It is compatible with ATEN VE170R, VE170RQ, and VE172R receiver units, integrates seamlessly into existing Cat 5e infrastructure, and installs in a standard 1U rack with no drivers required. Need it fast? iptrading.com.au delivers across Australia — shop now. -
Vendor:ATEN
ATEN PE6108G-AU-G | NRGence eco PDU 1U 8-Outlet Metered & Switched, C14 In, 8x C13, 10A
PE6108G-AU-G
In stock
Vendor:ATENATEN PE6108G-AU-G | NRGence eco PDU 1U 8-Outlet Metered & Switched, C14 In, 8x C13, 10A
The ATEN PE6108G NRGence eco PDU is an intelligent 1U rack-mount power distribution unit delivering remote per-outlet power management across 8 x IEC 320 C13 outlets via a single IEC 60320 C14 input. Designed for data centres and server rooms, it provides real-time current, voltage, and kWh monitoring at device level, with configurable power-on sequencing, Proactive Overload Protection (POP), and alarm notifications via SMTP email, SNMP traps, or Syslog — giving IT teams full visibility and control over rack power consumption.
Managed via browser-based GUI, Telnet, or third-party SNMPv3 software, the PE6108G integrates with ATEN's eco DC Energy Management Web GUI for centralised multi-device oversight. Two RJ-11 sensor ports support optional environment probes for temperature and humidity monitoring, and two-level password security with 128-bit SSL encryption ensures safe remote access. Order now at iptrading.com.au — trusted by Australian IT professionals. -
Vendor:ATEN
ATEN CS1924ATC-AT-U | 4-Port USB 3.0 4K DisplayPort KVMP Switch, ATC, 2048x2048
CS1924ATC-AT-U
Stock Status: Enquire
Vendor:ATENATEN CS1924ATC-AT-U | 4-Port USB 3.0 4K DisplayPort KVMP Switch, ATC, 2048x2048
The ATEN CS1924ATC is a 4-port USB 3.0 DisplayPort KVMP™ switch purpose-built for Air Traffic Control environments, delivering the specialised 2048 x 2048 @ 60 Hz square resolution required for radar monitoring systems. Its Zero-Second Switch technology ensures a continuous, uninterrupted video stream during port transitions — eliminating black screens critical in ATC towers, approach control rooms, and area control centres. Dual lockable DC power jacks provide hardware-level power redundancy and failover, while ATEN's patented Video DynaSync™ and EDID Expert™ technologies ensure stable, optimised display output across all connected monitors.
Beyond its ATC-focused design, the CS1924ATC integrates a built-in 2-port USB 3.1 Gen 1 hub (SuperSpeed 5 Gbps), an RS-232 serial port for legacy device compatibility, and front and rear audio jacks for flexible console audio management. Port switching is supported via front panel pushbuttons, hotkeys, mouse gestures, RS-232 commands, or an optional remote port selector. A grounding terminal protects against power surges and static electricity, and the unit is firmware upgradeable for long-term deployment. Available now at iptrading.com.au — competitive prices and local support. -
Vendor:ATEN
ATEN CS1798A-AT-U | 8-Port 4K HDMI KVM Switch, 4096x2160, Cascade to 512
CS1798A-AT-U
Stock Status: Enquire
Vendor:ATENATEN CS1798A-AT-U | 8-Port 4K HDMI KVM Switch, 4096x2160, Cascade to 512
The ATEN CS1798A is an enterprise-grade 8-port KVM switch delivering 4K DCI resolution (4096 x 2160 @ 60Hz) over HDMI, enabling a single USB console to control up to 8 computers with crisp, high-fidelity video. Designed for demanding rack environments, it supports 3-level cascading to manage up to 512 computers, multi-display stacking across up to 8 monitors, and includes a built-in 2-port USB 2.0 hub for shared peripheral access — making it ideal for data centres, server rooms, and broadcast facilities.
The CS1798A offers flexible port selection via front-panel pushbuttons, hotkeys, and an intuitive OSD with backup/restore capability. Video DynaSync™ eliminates boot-up display issues and optimises resolution during switching, while Broadcast Mode allows simultaneous operations across all connected computers. The 1U rack-mount metal chassis includes a rack mounting kit and firmware upgrade support via RJ11 for long-term compatibility. Available now at iptrading.com.au — competitive prices and local support. -
Vendor:ATEN
ATEN CS1922ATC-AT-U | CS1922ATC 2-Port 4K DisplayPort KVMP Switch, ATC, 2048x2048
CS1922ATC-AT-U
Stock Status: Enquire
Vendor:ATENATEN CS1922ATC-AT-U | CS1922ATC 2-Port 4K DisplayPort KVMP Switch, ATC, 2048x2048
The ATEN CS1922ATC is a 2-port USB 3.0 4K DisplayPort KVMP™ switch purpose-built for Air Traffic Control environments, including ATC towers, approach control rooms, and area control centres. It supports the critical 2048 x 2048 @ 60 Hz radar monitoring resolution and features Zero-Second Switch technology for uninterrupted, real-time switching with no black screen — essential for mission-critical operations. Dual lockable DC jacks provide power redundancy and failover protection, while the built-in 2-port USB 3.1 Gen 1 hub delivers SuperSpeed 5 Gbps data transfer rates.
Patented Video DynaSync™ and EDID Expert™ technologies eliminate boot-up display problems and ensure optimal resolution performance across all connected displays. An RS-232 serial port supports legacy device compatibility, and computer selection is available via front panel pushbuttons, hotkeys, mouse, or remote port selector. A grounding terminal protects against power surges and static electricity. Order now at iptrading.com.au — trusted by Australian IT professionals. -
Vendor:ATEN
ATEN CS1144D4-AT-U | 4-Port USB DVI Dual Display Secure KVM Switch, PSD PP v4.0, No CAC
CS1144D4-AT-U
Stock Status: Enquire
Vendor:ATENATEN CS1144D4-AT-U | 4-Port USB DVI Dual Display Secure KVM Switch, PSD PP v4.0, No CAC
The ATEN CS1144D4 is a 4-port USB DVI dual-display secure KVM switch built to meet the rigorous security demands of defence, intelligence, government, and financial environments. Certified by NIAP to PSD PP v4.0 (Protection Profile for Peripheral Sharing Device, Version 4.0), it enables up to four computers of varying security classifications to share a single keyboard, mouse, dual DVI monitors, and speaker set — all with strict hardware-enforced isolation between each connected source. This variant supports DVI interface connectivity without CAC (Common Access Card) reader support.
Multi-layered security is built into every aspect of the CS1144D4: always-on chassis intrusion detection renders the switch inoperable if tampered with, non-reprogrammable firmware eliminates firmware-based attack vectors, and unidirectional data flow ensures no cross-contamination between ports. Keyboard and mouse buffers are automatically purged on port switching, and non-authorised HIDs and video connections are rejected outright. Supports DVI Dual Link resolutions up to 2560 x 1600 and ATEN Video DynaSync™ for seamless display optimisation across sources. Visit iptrading.com.au to secure your order — enterprise-grade hardware with expert support. -
Vendor:ATEN
ATEN CS1142H4-AT-U | 2-Port USB HDMI Dual Display Secure KVM Switch, 4K, PSD PP v4.0, No CAC
CS1142H4-AT-U
Stock Status: Enquire
Vendor:ATENATEN CS1142H4-AT-U | 2-Port USB HDMI Dual Display Secure KVM Switch, 4K, PSD PP v4.0, No CAC
The ATEN CS1142H4 is a 2-port secure KVM switch with dual HDMI display support, purpose-built for high-security defence and intelligence environments requiring PSD PP v4.0 (NIAP) compliance. Supporting video resolutions up to 3840×2160 @ 60 Hz (4K UHD), it delivers strict unidirectional data flow between connected computers, always-on chassis intrusion detection, and non-reprogrammable firmware to eliminate attack vectors at the hardware level. This variant ships without CAC (Common Access Card) reader support.
Configurable Device Filtration gives administrators granular control over which USB HID devices are permitted, while strict audio filtration and automatic data purging on port switching prevent data leakage between connected systems. Switching is manual only — via front-panel pushbuttons or an optional Remote Port Selector — ensuring no software-based switching vulnerabilities exist. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:ATEN
ATEN CS1142H4C-AT-U | 2-Port Dual Display HDMI Secure KVM Switch with CAC, PSD PP v4.0
CS1142H4C-AT-U
Stock Status: Enquire
Vendor:ATENATEN CS1142H4C-AT-U | 2-Port Dual Display HDMI Secure KVM Switch with CAC, PSD PP v4.0
The ATEN CS1142H4C is a 2-port HDMI dual display secure KVM switch designed for high-security environments requiring strict compliance with PSD PP v4.0 (NIAP certified). It allows a single keyboard, mouse, dual monitors, speaker set, and Common Access Card (CAC) reader to be shared between two computers of differing security classifications — making it ideal for government, military, healthcare, banking, and finance deployments where data isolation is non-negotiable. Hardware-enforced security features include always-on chassis intrusion detection, non-reprogrammable firmware, unidirectional data flow, and tamper-evident labelling.
The CS1142H4C supports 4K UHD video output at up to 3840 x 2160 @ 60 Hz across both displays, with strict audio filtration and configurable USB device filtering to reject unauthorised HIDs or authentication devices. Administrative audit logging, LED security status indicators, and ATEN's Video DynaSync™ technology round out the feature set for seamless, secure multi-classification switching. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:ATEN
ATEN CS1142DPH4-AT-U | 2-Port Dual Display Secure KVM Switch, 5K DP/HDMI, NIAP PSD PP v4.0, Non-CAC
CS1142DPH4-AT-U
Stock Status: Enquire
Vendor:ATENATEN CS1142DPH4-AT-U | 2-Port Dual Display Secure KVM Switch, 5K DP/HDMI, NIAP PSD PP v4.0, Non-CAC
The ATEN CS1142DPH4 is a 2-port secure KVM switch engineered for defence, intelligence, and high-security enterprise environments requiring NIAP-certified PSD PP v4.0 compliance. It delivers dual-display control over two computers via DisplayPort/HDMI combo connectors at resolutions up to 5K (5120×2880 @ 60Hz), with strictly enforced unidirectional data flow, tamper-proof hardware, and non-reprogrammable firmware to eliminate any risk of cross-contamination or data leakage between connected sources. This Non-CAC variant does not include a Common Access Card reader port.
Beyond hardware isolation, the CS1142DPH4 features always-on chassis intrusion detection that renders the unit inoperable if tampered with, configurable USB HID device filtration, strict audio isolation on analog speaker outputs, and administrative audit logging for full accountability. ATEN's Video DynaSync™ technology ensures seamless resolution optimisation on every port switch, while manual-only switching via front-panel pushbuttons or an optional Remote Port Selector (RPS) prevents any software-based port manipulation. Ideal for government, military, banking, and healthcare deployments. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:ATEN
ATEN CS1142DPH4C-AT-U | 2-Port Dual Display Secure KVM Switch, 5K DP/HDMI, CAC, PSD PP v4.0
CS1142DPH4C-AT-U
Stock Status: Enquire
Vendor:ATENATEN CS1142DPH4C-AT-U | 2-Port Dual Display Secure KVM Switch, 5K DP/HDMI, CAC, PSD PP v4.0
The ATEN CS1142DPH4C is a 2-port, PSD PP v4.0 (NIAP)-compliant Universal Secure KVM Switch built for defence, intelligence, and other high-security environments. It lets authorised users share a keyboard, mouse, dual DisplayPort/HDMI displays, speakers, and a Common Access Card (CAC) reader across two computers of differing security classifications — all while enforcing strict, hardware-enforced data separation at up to 5K (5120×2880 @ 60Hz) resolution. Multi-layered protections include always-on chassis intrusion detection, non-reprogrammable firmware, tamper-evident labels, unidirectional data flow, and automatic keyboard/mouse data purging on every port switch.
Beyond core security, the CS1142DPH4C supports configurable CAC and HID port filtering, administrative audit log access, and ATEN's Video DynaSync™ technology to eliminate display boot-up issues when switching between sources. DisplayPort/HDMI combo connectors on both the PC and console sides provide flexible cabling options, while front-panel pushbuttons and an optional Remote Port Selector (RPS) deliver convenient port switching. Ideal for government, military, healthcare, and banking deployments requiring NIAP-certified security without compromising display fidelity. Upgrade your network with gear from iptrading.com.au — Australia's IT hardware specialists. -
Vendor:ATEN
ATEN CS1142D4-AT-U | 2-Port DVI Dual Display Secure KVM Switch, PSD PP v4.0, No CAC
CS1142D4-AT-U
Stock Status: Enquire
Vendor:ATENATEN CS1142D4-AT-U | 2-Port DVI Dual Display Secure KVM Switch, PSD PP v4.0, No CAC
The ATEN CS1142D4 is a 2-port, dual-display DVI Secure KVM Switch certified to PSD PP v4.0 (NIAP), purpose-built for defence, intelligence, government, and high-security environments where strict data separation between computers of different classification levels is mandatory. It allows a single user to share one keyboard, mouse, dual DVI monitors, and speaker set across two computers, with always-on chassis intrusion detection that permanently disables the switch if physical tampering is detected. Non-reprogrammable firmware, unidirectional data flow, automatic keyboard/mouse buffer purging on port switch, and strict audio filtration ensure air-gap-level security without compromising usability.
The CS1142D4 supports resolutions up to 2560x1600 via DVI Dual Link, or up to 3840x2160 @ 30 Hz when used with ATEN DVI-to-HDMI KVM cables. Port switching is hardware-only via front-panel pushbuttons or an optional Remote Port Selector — no software switching is permitted. This variant does not include a CAC (Common Access Card) reader, making it ideal for deployments where smart-card authentication is managed separately. In stock and ready to ship from iptrading.com.au — order now for fast dispatch. -
Vendor:ATEN
ATEN CL5708MW-ATA-AU | CL5708 8-Port PS/2-USB VGA LCD KVM Switch, 17.3" FHD, AU Cord
CL5708MW-ATA-AU
Stock Status: Enquire
Vendor:ATENATEN CL5708MW-ATA-AU | CL5708 8-Port PS/2-USB VGA LCD KVM Switch, 17.3" FHD, AU Cord
The ATEN CL5708MW is a 1U rack-mountable Slideaway LCD KVM Switch combining a 17.3" Full HD (1920×1080) LED-backlit display, keyboard, and touchpad into a single integrated console that controls up to 8 servers directly. Designed for data centre and server room environments, it supports both PS/2 and USB interfaces with no software required — switching is handled via front-panel pushbuttons, hotkeys, or the on-screen display. This AU variant ships with an Australian power cord. Daisy-chain up to 31 additional units to manage up to 256 computers from one console.
The CL5708MW offers multiplatform compatibility across Windows, Linux, Mac, and Sun, with two-level password security (one administrator plus four user accounts). The LCD module rotates up to 120 degrees for comfortable viewing at any rack position, and an exclusive LED illumination light ensures keyboard and touchpad visibility in low-light conditions. In stock and ready to ship from iptrading.com.au — order now for fast dispatch.
Trusted ICT Solutions Backed by 20+ Years of Expertise
At IP Trading, we specialise in delivering high-quality ICT products and solutions tailored to business, government, and enterprise needs. With over two decades of experience, we provide seamless procurement, expert support, and competitive pricing on a vast range of networking, security, server, storage, and power solutions. Our dedicated account managers ensure streamlined interactions with preferred vendors, eliminating time-consuming follow-ups while offering expert advice on project design, sourcing, and implementation.
Why Choose IP Trading?
We are a trusted supplier to Federal, State, and Local Government departments, Not-for-Profit organisations, and businesses of all sizes. Our team of experts in technical sales, logistics, finance, and account management ensures efficiency at every stage—from presales consultation to contract negotiation. As a registered supplier on the Australian Government’s DTA Hardware Marketplace and a prequalified ICT provider for NSW and QLD Government projects, we bring credibility and reliability to every transaction. Partner with IP Trading for flexible, innovative, and cost-effective ICT solutions tailored to your needs.