-
Vendor:Eaton
Eaton Tripp Lite SMX1200XLHG Medical-Grade UPS, 1kVA 750W, 230V, 6 x C13, Full Isolation, Extended Runtime
SMX1200XLHG
Stock Status: Enquire
Vendor:EatonEaton Tripp Lite SMX1200XLHG Medical-Grade UPS, 1kVA 750W, 230V, 6 x C13, Full Isolation, Extended Runtime
The Eaton Tripp Lite SMX1200XLHG is a medical-grade, line-interactive UPS designed for dependable backup power in patient-care vicinities when plugged into a hospital-grade outlet. It provides 1kVA / 750W capacity with full isolation via an integrated isolation transformer and Faraday shield, helping reduce common mode noise while maintaining surge protection in all modes.
Automatic voltage regulation (AVR) corrects brownouts and overvoltages without using battery, keeping connected equipment running through unstable mains power. A quiet alarm mode, clear front-panel status LEDs, and USB/DB9 monitoring with PowerAlert software support safe, unattended shutdown during extended outages.
Need more runtime? This model supports external battery packs for extended runtime, making it suitable for longer power interruptions where you need extra time to ride through or shut down cleanly.
-
Vendor:Eaton
Eaton Tripp Lite SmartPro SMX700HG | Medical-Grade UPS 230V 700VA 450W | 6 x C13
SMX700HG
Stock Status: Enquire
Vendor:EatonEaton Tripp Lite SmartPro SMX700HG | Medical-Grade UPS 230V 700VA 450W | 6 x C13
SMX700HG is a medical-grade, line-interactive UPS designed for 230V environments where low leakage current and isolation are required. It provides battery backup, automatic voltage regulation (AVR) and surge protection for connected equipment in patient-care vicinities (when connected to an appropriate hospital-grade outlet).
- Capacity: 700VA / 450W
- Runtime: up to 36 minutes at half load (225W), up to 14.5 minutes at full load (450W)
- Outlets: 6 x IEC C13 (hospital-grade), battery backup + surge protection on all outlets
- Input: IEC C14 inlet on short input lead
- Isolation: built-in isolation transformer with Faraday shield for full isolation and common-mode noise reduction
- Low leakage: cumulative leakage current less than 100 microamps (connected load dependent)
- Monitoring: USB and DB9 serial for unattended shutdown with PowerAlert software
Note: No power cord is included. This UPS is intended to remain connected to mains power except during outages. It is not intended for frequent charge/discharge use cases (for example, mobile carts that are often unplugged).
Warranty: 2-year limited warranty.
-
Vendor:Ubiquiti
Ubiquiti UACC-AI-KEY-RM | UniFi Protect AI Key Rack Mount, 1U 19-inch Bracket
UACC-AI-KEY-RM
Stock Status: Enquire
Vendor:UbiquitiUbiquiti UACC-AI-KEY-RM | UniFi Protect AI Key Rack Mount, 1U 19-inch Bracket
Mount your UniFi Protect AI Key neatly in a standard rack with this dedicated rack mount bracket. It delivers a clean, professional look while helping protect the device in network cabinets and AV racks. Designed for 19-inch racks with a slim 1U profile, it keeps ports accessible and cabling tidy for easy serviceability. Built from durable metal and backed by Ubiquiti’s limited warranty. Need it fast? iptrading.com.au delivers across Australia — shop now. -
Vendor:APC
APC AR9587B2 | NetShelter SX Advanced Rack 48U, 800mm W x 1295mm D, No Shock Packaging, Black
AR9587B2
Stock Status: Enquire
Vendor:APCAPC AR9587B2 | NetShelter SX Advanced Rack 48U, 800mm W x 1295mm D, No Shock Packaging, Black
The NetShelter SX Advanced 48U cabinet provides a robust, data-centre–ready enclosure with a wide 800mm footprint and deep 1295mm chassis to accommodate large servers, storage and dense cable routing.. It’s engineered for reliable airflow, cable management and serviceability in high‑density deployments, backed by APC’s manufacturer warranty. This AR9587B2 variant ships without shock packaging, ideal for standard on-site delivery when palletised shock shipping is not required.. Pair with APC rack PDUs and accessories for a complete solution supported locally by IP Trading.. Visit iptrading.com.au to secure your order — enterprise-grade hardware with expert support. -
Vendor:APC
APC AR9585B2 | NetShelter SX Advanced 45U High-Strength Rack, 800mm x 1295mm, Black
AR9585B2
Stock Status: Enquire
Vendor:APCAPC AR9585B2 | NetShelter SX Advanced 45U High-Strength Rack, 800mm x 1295mm, Black
Build dense, high‑reliability rack rows with the NetShelter SX Advanced 45U high‑strength enclosure.. The 800mm width provides generous cable routing and PDU space, while the 1295mm depth accommodates large servers and deep networking gear in a clean, professional black finish. This variant ships without a shock package, making it ideal for standard on‑site handling.. It supports standard 19" EIA‑310 equipment and integrates seamlessly with APC PDUs, cable management, and accessories, and is backed by the APC manufacturer warranty.. Order now at iptrading.com.au — trusted by Australian IT professionals. -
Vendor:APC
APC AR9555B2 | NetShelter SX Advanced High-Strength 45U Freestanding Rack, 750mm W, 1295mm D, Black, No Shock Packaging
AR9555B2
Stock Status: Enquire
Vendor:APCAPC AR9555B2 | NetShelter SX Advanced High-Strength 45U Freestanding Rack, 750mm W, 1295mm D, Black, No Shock Packaging
The AR9555B2 NetShelter SX Advanced High-Strength 45U rack is built for dense, heavy IT loads, combining a 750 mm wide footprint for generous side cable routing with a deep 1295 mm chassis to accommodate extra‑long servers and networking gear.. Finished in black, it integrates cleanly into modern data centre environments.. Engineered to APC’s high-strength NetShelter SX Advanced specification and EIA-310 19-inch compatible, this model is supplied without shock packaging for standard site installations. Backed by the manufacturer’s warranty and supported locally by IP Trading.. Need it fast?. iptrading.com.au delivers across Australia — shop now. Need it fast? iptrading.com.au delivers across Australia — shop now. -
Vendor:ATEN
ATEN 2K-0001 | 2-in-1U Rack Mount Kit for CL31xx/CL37xx/CL38xx
2K-0001
Stock Status: Enquire
Vendor:ATENATEN 2K-0001 | 2-in-1U Rack Mount Kit for CL31xx/CL37xx/CL38xx
Install your CL31xx/CL37xx/CL38xx LCD KVM console and compatible KVM switch together in just 1U with this 2-in-1U rack mount kit. Built for standard 19" EIA-310 racks, it delivers a clean, secure fit for space-constrained server rooms. Designed for standard installation, the kit preserves valuable rack space while maintaining full console accessibility. Backed by ATEN's standard hardware warranty; check the official datasheet for details. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Ubiquiti
Ubiquiti UACC-RACK-RAILS-SLIDE | UniFi UACC Sliding Rack Rails Kit, Adjustable 19" Rack Mount
UACC-RACK-RAILS-SLIDE
In stock
Vendor:UbiquitiUbiquiti UACC-RACK-RAILS-SLIDE | UniFi UACC Sliding Rack Rails Kit, Adjustable 19" Rack Mount
Streamline installation and maintenance of UniFi rack-mount appliances with the UACC Sliding Rack Rails. This adjustable 19" rail kit provides smooth slide-out access for servicing while keeping devices securely mounted. Designed for standard 19" equipment racks and variable rack depths, it delivers a clean, professional fit for UniFi deployments. Backed by Ubiquiti’s limited hardware warranty. In stock and ready to ship from iptrading.com.au — order now for fast dispatch. -
Vendor:Ubiquiti
Ubiquiti UACC-Rack-12U-Wall-SW-P | Mount Network Rack Cabinet, Perforated Door (19"), 12U Wall
UACC-Rack-12U-Wall-SW-P
Stock Status: Enquire
Vendor:UbiquitiUbiquiti UACC-Rack-12U-Wall-SW-P | Mount Network Rack Cabinet, Perforated Door (19"), 12U Wall
Space‑efficient 12U wall‑mount rack cabinet designed for standard 19" networking equipment. The perforated front door promotes passive airflow to help keep switches, patch panels and appliances running cooler in compact comms spaces and wiring closets. Built with robust steel construction and EIA-310 compatibility, it’s an ideal, professional enclosure for small to mid‑size network builds. Backed by the manufacturer’s limited hardware warranty. Buy today from iptrading.com.au — fast shipping and expert service across Australia. -
Vendor:Ubiquiti
Ubiquiti UACC-Rack-12U-Wall-SW-G | Mount Swing Cabinet, UACC Rack 12U Wall, 19" Glass Door
UACC-Rack-12U-Wall-SW-G
Stock Status: Enquire
Vendor:UbiquitiUbiquiti UACC-Rack-12U-Wall-SW-G | Mount Swing Cabinet, UACC Rack 12U Wall, 19" Glass Door
Optimise network and AV installs with a 12U wall-mount swing cabinet designed to fit standard 19" equipment. The tempered glass front door provides clear visibility while the swing-out design enables fast rear access for cabling and maintenance. Built for tidy, secure deployments of switches, patch panels, NVRs and more, it features steel construction and ventilation for reliable operation. Covered by Ubiquiti’s limited manufacturer warranty. Need it fast?. iptrading.com.au delivers across Australia — shop now. Need it fast? iptrading.com.au delivers across Australia — shop now. -
Vendor:Ubiquiti
Ubiquiti UACC-Rack-12U-Wall-600-P | UACC Rack 12U Wall Cabinet, Perforated Door, 600mm Deep
UACC-Rack-12U-Wall-600-P
Stock Status: Enquire
Vendor:UbiquitiUbiquiti UACC-Rack-12U-Wall-600-P | UACC Rack 12U Wall Cabinet, Perforated Door, 600mm Deep
Optimise small comms rooms and IDFs with a robust 12U wall‑mount cabinet featuring a 600 mm depth and a perforated front door for enhanced airflow. Built to the EIA‑310 19" standard, it neatly houses switches, patch panels, NVRs and other rack‑mount gear. Designed by Ubiquiti and backed by the manufacturer’s warranty, this enclosure helps keep network equipment organised, accessible and secure while saving floor space. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Ubiquiti
Ubiquiti UACC-Rack-12U-Wall-600-G | UACC Rack 12U Wall, Mount Cabinet, 600mm Depth, Glass Door
UACC-Rack-12U-Wall-600-G
Stock Status: Enquire
Vendor:UbiquitiUbiquiti UACC-Rack-12U-Wall-600-G | UACC Rack 12U Wall, Mount Cabinet, 600mm Depth, Glass Door
A compact, professional 12U wall‑mount rack cabinet designed for standard 19" equipment. The UACC Rack 12U Wall‑600‑G provides a 600 mm cabinet depth with a clear glass front door to quickly view status LEDs while keeping gear protected — ideal for edge closets, branch offices, and AV/network installs. Built for Ubiquiti and third‑party 19" hardware, it offers clean, space‑saving deployment for switches, patch panels, gateways, and accessories, backed by the manufacturer’s limited warranty. Visit iptrading.com.au to secure your order — enterprise-grade hardware with expert support. -
Vendor:Ubiquiti
Ubiquiti UACC-Rack-12U-Wall-450-P | UACC Rack 12U Wall, Perforated Door, Mount Cabinet, 450 mm Depth
UACC-Rack-12U-Wall-450-P
Stock Status: Enquire
Vendor:UbiquitiUbiquiti UACC-Rack-12U-Wall-450-P | UACC Rack 12U Wall, Perforated Door, Mount Cabinet, 450 mm Depth
Compact and robust, this 12U wall‑mount rack cabinet streamlines network rollouts in tight spaces. The 450 mm depth supports a wide range of 19" rack‑mount switches, patch panels, and small servers while the perforated front door promotes airflow and quick visual checks. Built with a steel chassis and lockable front access, it’s ideal for SMB comms rooms and branch deployments. Fully compatible with standard 19" equipment and backed by Ubiquiti’s limited manufacturer warranty. Visit iptrading.com.au to secure your order — enterprise-grade hardware with expert support. -
Vendor:Ubiquiti
Ubiquiti UACC-Rack-12U-Wall-450-G | Tempered Glass Door, Mount Rack Cabinet, UACC 12U Wall, 450mm Deep, 19" EIA
UACC-Rack-12U-Wall-450-G
Stock Status: Enquire
Vendor:UbiquitiUbiquiti UACC-Rack-12U-Wall-450-G | Tempered Glass Door, Mount Rack Cabinet, UACC 12U Wall, 450mm Deep, 19" EIA
The UACC 12U wall‑mount rack cabinet provides a tidy, professional enclosure for compact network builds. With a 450 mm depth and 19" EIA-310 compliance, it’s ideal for switches, patch panels, NVRs, and other shallow network devices, while the tempered glass door offers clear visibility of equipment status. Built from robust steel with vented panels to aid airflow, this cabinet helps protect and organise gear in offices, branches, and AV spaces. Backed by a limited 1‑year manufacturer warranty for peace of mind. Buy today from iptrading.com.au — fast shipping and expert service across Australia. -
Vendor:ATEN
ATEN PE6208G-ATB-G | eco PDU Metered & Switched, 8 Outlets, 20A/16A, 1U
PE6208G-ATB-G
Stock Status: Enquire
Vendor:ATENATEN PE6208G-ATB-G | eco PDU Metered & Switched, 8 Outlets, 20A/16A, 1U
ATEN’s eco PDU delivers intelligent power distribution with 8 switched outlets in a compact 1U design. It provides input-level metering, per‑outlet on/off/cycle control with sequencing, a front‑panel current display, and secure remote management over Ethernet. Ideal for server rooms, network closets, and lab racks, it supports SNMP integration and optional environmental sensors to monitor site conditions. Backed by ATEN warranty and enterprise-grade reliability. In stock and ready to ship from iptrading.com.au — order now for fast dispatch. -
Vendor:HPE
HPE P9Q37A | G2 Basic PDU, 1U Horizontal, IEC C20 16A, 12 x C13, 3.6kVA
P9Q37A
Stock Status: Enquire
Vendor:HPEHPE P9Q37A | G2 Basic PDU, 1U Horizontal, IEC C20 16A, 12 x C13, 3.6kVA
The HPE G2 Basic 3.6kVA PDU delivers dependable, single‑phase rack power distribution with 12 x IEC C13 outlets in a compact 1U horizontal form factor. Its IEC C20 16A inlet supports 100–240V AC for global deployments and simple integration across enterprise racks. Built for straightforward, unswitched power delivery, this basic PDU suits servers, storage and networking gear that use IEC C13 cords. Backed by an HPE limited 3‑year warranty for peace of mind. Visit iptrading.com.au to secure your order — enterprise-grade hardware with expert support.
Trusted ICT Solutions Backed by 20+ Years of Expertise
At IP Trading, we specialise in delivering high-quality ICT products and solutions tailored to business, government, and enterprise needs. With over two decades of experience, we provide seamless procurement, expert support, and competitive pricing on a vast range of networking, security, server, storage, and power solutions. Our dedicated account managers ensure streamlined interactions with preferred vendors, eliminating time-consuming follow-ups while offering expert advice on project design, sourcing, and implementation.
Why Choose IP Trading?
We are a trusted supplier to Federal, State, and Local Government departments, Not-for-Profit organisations, and businesses of all sizes. Our team of experts in technical sales, logistics, finance, and account management ensures efficiency at every stage—from presales consultation to contract negotiation. As a registered supplier on the Australian Government’s DTA Hardware Marketplace and a prequalified ICT provider for NSW and QLD Government projects, we bring credibility and reliability to every transaction. Partner with IP Trading for flexible, innovative, and cost-effective ICT solutions tailored to your needs.