Skip to product information
1 of 1

Moxa

Moxa MGate MB3170-S-SC-G2 | MGate MB3170-G2 Modbus Gateway, RJ45 + SC Single-Mode Fibre

Moxa MGate MB3170-S-SC-G2 | MGate MB3170-G2 Modbus Gateway, RJ45 + SC Single-Mode Fibre

Authorised Moxa Partner

SKU:MGate MB3170-S-SC-G2

Stock Status: Enquire

Request Quote
Sale Stock Status: Enquire
Shipping calculated at checkout.

Description

The Moxa MGate MB3170-S-SC-G2 is a 1-port advanced Modbus gateway that converts between Modbus TCP and Modbus RTU/ASCII. It provides one 10/100BaseT(X) RJ45 port and one 100BaseFX single-mode SC fibre port, so it suits plant networks that need fibre uplinks for noise immunity or longer runs. The software-selectable RS-232/422/485 serial port on a DB9 connector lets a single unit bridge serial Modbus devices into an Ethernet network. This variant has non-isolated serial and an operating range of -10 to 60°C.

The gateway supports up to 32 Modbus TCP client and 32 server connections, with both client (master) and server (slave) modes. Its agent mode actively polls connected devices and caches data for low-latency responses, while Auto Device Routing simplifies configuration. The two Ethernet ports can be used in cascade or dual-subnet arrangements, and built-in Modbus test tools and traffic monitoring help with commissioning and troubleshooting.

Features

- Modbus TCP to Modbus RTU/ASCII protocol conversion
- Client (master) and server (slave) operating modes
- High-performing, low-latency agent mode that actively polls devices and caches data
- Supports proprietary Modbus and Modbus extensions for various devices
- Auto Device Routing for easy configuration
- Route by TCP port or IP address
- Ethernet cascading or dual subnet for flexible network design
- Built-in Modbus communication test tools and traffic monitoring for troubleshooting
- Redundant dual DC power inputs and 1 relay output

Warranty

Moxa offers varying warranty periods depending on the product category:
• 5-Year Warranty: Applies to most industrial networking and connectivity products, including Ethernet switches, routers, wireless devices, serial converters, protocol gateways, and USB hubs.
• 3-Year Warranty: Covers x86-based industrial computers and panel PCs.
• 1-Year Warranty: Applies to external batteries, LCD panels, power adapters, antennas, and other select accessories.
Extended Warranty Options:
IP Trading offers tailored extended warranty solutions and support packages for Moxa products. Contact our team to explore options that align with your organization's needs.
https://www.moxa.com/en/support/repair-and-warranty/warranty-policy

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Collapsible content

Technical Specifications

FAQs

Datasheet

Technical Specifications

- 1 x RS-232/422/485 serial port, software selectable, DB9 connector
- Ethernet: 1 x 10/100BaseT(X) RJ45 + 1 x 100BaseFX single-mode SC fibre
- Cascade or dual subnet operation via software
- Serial baud rate 50 bps to 921.6 kbps
- Up to 32 Modbus TCP client connections and 32 server connections
- Modbus functions supported: 1, 2, 3, 4, 5, 6, 15, 16, 23
- Software-selectable RS-485 pull high/low resistor (1k/150k ohm) and 120 ohm terminator
- 1.5 kV built-in magnetic isolation on Ethernet ports
- Operating temperature -10 to 60°C
- Non-isolated serial interface

FAQs

Q: What does the Moxa MGate MB3170-S-SC-G2 do?
A: It is a Modbus gateway that converts between Modbus TCP on Ethernet and Modbus RTU/ASCII on a serial port, letting serial Modbus devices communicate over an IP network.

Q: What Ethernet interfaces does this model have?
A: It has one 10/100BaseT(X) RJ45 port and one 100BaseFX single-mode SC fibre port. The two ports can run in cascade or dual-subnet mode, set by software.

Q: Which serial interfaces are supported?
A: One software-selectable RS-232/422/485 serial port on a DB9 connector, with baud rates from 50 bps to 921.6 kbps. This variant uses a non-isolated serial interface.

Q: How many Modbus TCP connections can it handle?
A: Up to 32 Modbus TCP client connections and 32 server connections, and it can operate as either a Modbus master or slave.

Q: How does the -S-SC variant differ from copper-only MB3170 models?
A: The -S-SC variant replaces the second copper port with a 100BaseFX single-mode SC fibre port, so it combines one RJ45 and one fibre Ethernet connection.

Q: What is the operating temperature range?
A: The standard operating range is -10 to 60°C, making it suitable for typical indoor industrial cabinets.

Datasheet

This product has a detailed PDF datasheet available. Open PDF datasheet in a new tab .

Your browser can’t display the embedded PDF. Click here to open it in a new tab.

Recently Viewed

  • Request for a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  
  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us