• Silver SFP-1FEMLC-T-BCC transceiver with blue fiber connector and Blue Cable Co label
1 1

Blue Cable Co

SFP-1FEMLC-T-BCC | Moxa Compatible 100MB Multi-Mode - 2km (100BASE-FX)

SFP-1FEMLC-T-BCC | Moxa Compatible 100MB Multi-Mode - 2km (100BASE-FX)

SFP-1FEMLC-T-BCC

In stock:16

$36.94 AUD
$36.94 AUD
$36.94 AUD
Sale Stock Status: Enquire
Taxes included. Shipping calculated at checkout.

Description

The SFP-1FEMLC-T-BCC is a drop-in compatible replacement for the Moxa SFP-1FEMLC-T. This transceiver operates as a plug-and-play solution in Moxa Ethernet switches with SFP slots supporting Fast Ethernet. - IEEE 802.3u compliance guarantees 100BASE-FX interoperability across multi-vendor Fast Ethernet networks - SFP form factor, 100Mbps data rate, 1310nm wavelength over multi-mode fibre with LC duplex connector - Reaches up to 2km over MMF with typical fibre infrastructure - Digital Diagnostic Monitoring (DOM) provides real-time visibility into optical power levels, temperature, and voltage - Industrial temperature rating of -40 to 85 degrees C supports deployment in harsh environments - Hot-swappable design with SFP MSA compliance for seamless integration

Features

• IEEE 802.3u 100BASE-FX compliance ensures protocol-level interoperability with all Fast Ethernet infrastructure, regardless of vendor, eliminating integration risk in multi-vendor deployments
• 1310nm nominal wavelength over multi-mode fibre balances reach and cost for campus and building backbone applications where 2km range is sufficient
• Industrial extended temperature range (-40 to 85°C) qualifies this transceiver for outdoor cabinets, railway trackside installations, and factory floor environments where commercial-grade optics fail
• Digital Diagnostic Monitoring exposes transmit/receive power, bias current, supply voltage, and temperature via I2C interface, enabling predictive maintenance and faster troubleshooting
• SFP MSA mechanical and electrical compliance guarantees physical fit and signal integrity in any standards-compliant SFP cage, supporting mixed-vendor optics strategies
• Hot-swappable operation allows field insertion and removal without powering down the host switch, reducing maintenance windows and service interruption

Warranty

5-Year Advanced Warranty on All Blue Cable Co® Products

Blue Cable Co® offers a comprehensive 5-Year Advanced Warranty on all our branded products. Our advanced warranty ensures fast, hassle-free replacements to keep your network running smoothly. If a fault occurs, we'll deliver a replacement part before you return the faulty itemminimising downtime and giving you complete peace of mind.

Choose Blue Cable Co® for reliable, high-quality network components backed by industry-leading warranty support.

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Technical Specifications

FAQs

Compatible SFP Selector

Technical Specifications

Brand: Blue Cable Co
BCC SKU: SFP-1FEMLC-T-BCC
Compatible Replacement For: SFP-1FEMLC-T
Compatibility: Moxa compatible
Lab Testing: Tested in Sydney, Australia
Warranty: 5-year advanced hardware replacement (Blue Cable Co)
Form Factor: SFP
Data Rate: 100Mbps
Standard: 100BASE-FX (IEEE 802.3u)
Wavelength: 1310nm
Fibre Type: Multi-mode (MMF)
Connector Type: LC duplex
Max Reach: Up to 2km (per datasheet, subject to fibre and link conditions)
DOM Support: Yes (Digital Diagnostic Monitoring)
Operating Temperature: -40 to 85 degrees C (industrial extended temperature)

FAQs

Q: Will this work in place of the Moxa SFP-1FEMLC-T?
A: Yes. This transceiver is engineered to the same 100BASE-FX specification (IEEE 802.3u), with identical form factor (SFP), data rate (100Mbps), wavelength (1310nm), and reach (2km over MMF). It operates plug-and-play in Moxa switches that specify the SFP-1FEMLC-T as a supported transceiver, with full electrical and optical compatibility.

Q: Which Moxa switches support this transceiver?
A: This transceiver is compatible with Moxa Ethernet switches in the SFP-1FE series accessory family that provide SFP slots supporting 100Mbps Fast Ethernet. Any Moxa platform listing SFP-1FEMLC-T compatibility will accept this module. Verify your switch documentation confirms 100BASE-FX SFP support.

Q: What multi-mode fibre types can I use to achieve 2km reach?
A: The 2km reach specification assumes OM1 (62.5/125um) or OM2 (50/125um) multi-mode fibre with typical modal bandwidth. Actual distance depends on fibre attenuation, connector loss, and modal dispersion. Higher-grade OM3 or OM4 fibre may extend reach slightly, but 100BASE-FX at 1310nm is optimized for standard MMF infrastructure rather than premium fibre grades.

Q: Can I monitor link health without a network management system?
A: Yes, via the DOM interface. The transceiver reports optical transmit power, receive power, laser bias current, supply voltage, and module temperature over the I2C management bus. Any switch or NOS that supports SFP diagnostics can poll these parameters without requiring external SNMP or CLI tools, enabling local troubleshooting of fibre issues or transceiver degradation.

Q: Why does this transceiver use 1310nm instead of 850nm for multi-mode fibre?
A: 1310nm offers lower dispersion and higher link budget on multi-mode fibre compared to 850nm, allowing the 2km reach target. While 850nm is common for short-reach multi-mode links (up to 550m for Gigabit), 100BASE-FX leverages the dispersion characteristics of 1310nm to push beyond campus distances without requiring single-mode fibre infrastructure.

Compatible SFP Selector

Need a Compatible SFP or QSFP Transceiver?

Use the Blue Cable Co Compatible SFP Selector to quickly filter by vendor compatibility, speed, form factor, fibre type, distance and connector and only see options that exist in our range.
Fully tested. No brand-tax. Sydney re-coding available if required.

Find Compatible Transceivers

100% Compatible With Equipment From Major Vendors

Coded & tested in our state of the art lab in Sydney

Silver-colored sfp-10g-sr-bcc transceiver module with a white label featuring blue and black text, designed for 850nm wavelength optical communication.
Blue Cable Co®
Cisco

  • Request for a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us