• Silver metal juniper sfp 1ge fe e t transceiver with black plastic housing and printed labeling for industrial use
1 1

Juniper

Juniper SFP-1GE-FE-E-T | 1G SFP Copper Transceiver, RJ-45, 100m, Industrial Temp -40 to +85°C

Juniper SFP-1GE-FE-E-T | 1G SFP Copper Transceiver, RJ-45, 100m, Industrial Temp -40 to +85°C

SFP-1GE-FE-E-T

Stock Status: Enquire

$232.57 AUD
$232.57 AUD
$232.57 AUD
Sale Stock Status: Enquire
Taxes included. Shipping calculated at checkout.

Description

The Juniper SFP-1GE-FE-E-T is a tri-speed copper SFP transceiver delivering 10/100/1000BASE-T auto-negotiation over standard Category 5 shielded twisted-pair cabling at distances up to 100 metres. Rated for an industrial operating temperature range of -40°C to +85°C, it is purpose-built for ruggedised and harsh-environment deployments — including outdoor cabinets, factory floors, and transportation infrastructure — where commercial-grade optics would fail.

Compatible with Juniper MX240, MX480, and MX960 platforms, this hot-pluggable SFP module draws just 1 W maximum, keeping chassis power budgets lean. It conforms to SFP Multi-Source Agreement (MSA) standards and is fully qualified and tested by Juniper Networks for seamless integration. Order direct from iptrading.com.au — Australian-owned and operated since 2001.

Features

- Tri-speed auto-negotiation (10/100/1000 Mbps) for flexible copper connectivity
- Industrial temperature range (-40°C to +85°C) — suitable for harsh and ruggedised environments
- Hot-pluggable SFP footprint for zero-downtime installation and replacement
- Ultra-low power dissipation of just 1 W maximum
- RJ-45 connector enables cost-effective copper infrastructure reuse
- SFP MSA-compliant for broad platform interoperability
- Fully qualified and tested by Juniper Networks for guaranteed platform integration
- Eliminates need for media converters in mixed copper/fibre network deployments

Warranty

Juniper products are supplied with standard manufacturer warranty terms, which vary by product and can range from 1 year through to limited lifetime coverage. IP Trading can also provide Juniper J-Care warranty and support extensions for customers who need longer coverage or enhanced support options. https://support.juniper.net/support/warranty/

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Technical Specifications

FAQs

Technical Specifications

- Form Factor: SFP
- Standards: IEEE 802.3 10BASE-T, 100BASE-T, 1000BASE-T
- Interface: Tri-speed copper (10/100/1000 Mbps auto-negotiation)
- Connector: RJ-45
- Media: Copper, 4 twisted pair, Category 5 shielded
- Maximum Reach: 100 m
- Operating Temperature: -40°C to +85°C (Industrial)
- Maximum Power Consumption: 1 W
- Supported Platforms: Juniper MX240, MX480, MX960
- Compliance: SFP Multi-Source Agreement (MSA)

FAQs

Q: What cabling is required for the SFP-1GE-FE-E-T?
A: The SFP-1GE-FE-E-T requires Category 5 shielded twisted-pair (STP) copper cabling and supports runs up to 100 metres. It uses a standard RJ-45 connector.

Q: Why is the industrial temperature rating important for this transceiver?
A: Unlike commercial-grade SFPs rated only to 0°C–70°C, the SFP-1GE-FE-E-T operates reliably from -40°C to +85°C. This makes it suitable for outdoor network cabinets, industrial automation, transportation systems, and other environments subject to extreme temperature swings.

Q: Which Juniper platforms is this transceiver compatible with?
A: The SFP-1GE-FE-E-T is fully qualified by Juniper Networks for use in the MX240, MX480, and MX960 router platforms. Always verify compatibility with your specific line card before ordering.

Q: Does this SFP support all three speeds simultaneously or only one at a time?
A: The module supports tri-speed auto-negotiation, meaning it will automatically negotiate the best available link speed — 10, 100, or 1000 Mbps — with the connected device. Only one speed is active on any given link at a time.

Q: Can I purchase the SFP-1GE-FE-E-T in Australia from IP Trading?
A: Yes. IP Trading (iptrading.com.au) is an Australian-owned and operated IT hardware reseller, trading since 2001. The SFP-1GE-FE-E-T can be ordered directly through our website, with local support and competitive B2B pricing available.

Q: Is this transceiver suitable for use in a data centre vs. an industrial deployment?
A: While it will function in a data centre environment, the SFP-1GE-FE-E-T's primary value is its industrial temperature certification. For standard data centre deployments, a commercial-grade copper SFP may suffice. However, if your racks or edge locations experience temperature extremes — such as in mining, utilities, or transport — this module is specifically engineered for those conditions.

Recently Viewed

  • Request for a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us