• Silver EX-SFP-1GE-T-BCC SFP+ transceiver with gold connector and label
1 1

Blue Cable Co

EX-SFP-1GE-T-BCC | Juniper Compatible 1GB Ethernet RJ45 100m (1000BASE-T)

EX-SFP-1GE-T-BCC | Juniper Compatible 1GB Ethernet RJ45 100m (1000BASE-T)

EX-SFP-1GE-T-BCC

In stock:40

$66.00 AUD
$66.00 AUD
$66.00 AUD
Sale Stock Status: Enquire
Taxes included. Shipping calculated at checkout.

Description

The EX-SFP-1GE-T-BCC is a drop-in compatible replacement for the Juniper EX-SFP-1GE-T. This copper SFP transceiver provides plug-and-play 10/100/1000BASE-T connectivity for Juniper EX Series, QFX Series, MX Series, and SRX Series platforms equipped with standard SFP or SFP+ ports. - IEEE 802.3ab 1000BASE-T compliance ensures seamless interoperability with Gigabit Ethernet infrastructure over standard Cat5, Cat5e, or Cat6 copper cabling - SFP form factor with RJ45 connector supporting 10/100/1000 Mbps auto-negotiation up to 100 metres transmission distance - Hot-swappable installation with commercial operating temperature range from 0 to 70 degrees Celsius - Compatible with SGMII host interfaces for full 10/100/1000 operation; SERDES interfaces support 1000BASE-T mode only - Low power consumption design ideal for enterprise LAN, data centre top-of-rack, and edge networking deployments requiring flexible copper connectivity

Features

• IEEE 802.3ab 1000BASE-T compliance guarantees interoperability with industry-standard Gigabit Ethernet over twisted-pair copper, eliminating vendor lock-in for SFP copper ports across switching and routing platforms.

• Auto-negotiation across 10/100/1000 Mbps data rates allows seamless integration into mixed-speed environments, with the transceiver adapting to link partner capabilities without manual configuration.

• SGMII host interface support enables full 10/100/1000 Mbps operation when paired with SGMII-capable platforms; SERDES-based hosts operate at 1000BASE-T only, a distinction relevant for legacy hardware integration.

• Hot-swappable design with commercial temperature tolerance (0 to 70°C) supports live insertion and removal in production environments without service interruption, standard for modern enterprise deployments.

• RJ45 connectivity over Category 5 or better unshielded twisted pair (UTP) cabling leverages existing structured cabling infrastructure, reducing deployment cost compared to fibre solutions in short-reach applications up to 100 metres.

Warranty

5-Year Advanced Warranty on All Blue Cable Co® Products

Blue Cable Co® offers a comprehensive 5-Year Advanced Warranty on all our branded products. Our advanced warranty ensures fast, hassle-free replacements to keep your network running smoothly. If a fault occurs, we'll deliver a replacement part before you return the faulty itemminimising downtime and giving you complete peace of mind.

Choose Blue Cable Co® for reliable, high-quality network components backed by industry-leading warranty support.

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Technical Specifications

Alternate Part Codes

FAQs

Compatible SFP Selector

Technical Specifications

Brand: Blue Cable Co
BCC SKU: EX-SFP-1GE-T-BCC
Compatible Replacement For: EX-SFP-1GE-T
Compatibility: Juniper compatible
Lab Testing: Tested in Sydney, Australia
Warranty: 5-year advanced hardware replacement (Blue Cable Co)
Form Factor: SFP (Small Form-Factor Pluggable)
Data Rate: 10/100/1000 Mbps auto-negotiation
Connector Type: RJ45 copper
Standards: IEEE 802.3ab (1000BASE-T), IEEE 802.3 (10BASE-T, 100BASE-TX)
Max Reach: Up to 100m over Cat5/Cat5e/Cat6 copper cable
Operating Temperature: 0 to 70°C (commercial)
Power Consumption: <1.2W typical

Alternate Part Codes

740-013111, CTP-SFP-1GE-T, QFX-SFP-1GE-T, SFP-1G-T-C, SRX-SFP-1GE-T

FAQs

Q: Will this work in place of the Juniper EX-SFP-1GE-T?
A: Yes. This transceiver is built to IEEE 802.3ab 1000BASE-T and SFP MSA specifications, matching the form factor, data rate, and electrical interface of the EX-SFP-1GE-T. It provides plug-and-play compatibility with Juniper platforms that support the original part.

Q: Which Juniper platforms support this copper SFP transceiver?
A: This module is compatible with Juniper EX Series switches (EX2300, EX4000, EX4100, EX4600, EX4650, EX9200), QFX Series data centre switches (QFX3500, QFX5100, QFX5110, QFX5120, QFX5200, QFX10002), MX Series routers (MX5, MX10, MX40, MX80, MX104, MX204, MX240, MX480, MX960, MX2008, MX2010, MX2020, MX10003), SRX Series security appliances (SRX5400, SRX5600, SRX5800), and ACX Series metro routers with native SFP or SFP+ ports. Some platforms support this module only in management ports; consult the Juniper Hardware Compatibility Tool for port-specific details.

Q: What copper cable category is required to achieve 100 metre reach at 1000 Mbps?
A: IEEE 802.3ab specifies operation over 4-pair Category 5 balanced cabling as a minimum. Cat5e or Cat6 is recommended for improved margin on parameters like return loss and far-end crosstalk (ELFEXT). All four pairs carry traffic simultaneously using PAM5 encoding. Cable quality directly impacts maximum achievable distance at Gigabit speed.

Q: Does this transceiver support SGMII, and what is the difference from SERDES interfaces?
A: Yes, this module supports SGMII (Serial Gigabit Media Independent Interface), which enables full 10/100/1000 Mbps auto-negotiation. SGMII includes embedded clock recovery and speed negotiation. If your host platform uses a SERDES interface without SGMII, the module operates at 1000BASE-T only, without 10 Mbps or 100 Mbps fallback. Most modern Juniper platforms provide SGMII support.

Q: Can I use this transceiver in an SFP+ port, and are there any speed limitations?
A: Yes, SFP modules are electrically compatible with SFP+ ports and will operate at their native 1 Gbps maximum rate. The SFP+ port will not operate at 10 Gbps with this module installed. Some Juniper platforms (such as QFX5100 or MX204 with QSA adapters) explicitly support this configuration. Always verify your specific platform and Junos release in the Hardware Compatibility Tool if deploying in SFP+ slots.

Compatible SFP Selector

Need a Compatible SFP or QSFP Transceiver?

Use the Blue Cable Co Compatible SFP Selector to quickly filter by vendor compatibility, speed, form factor, fibre type, distance and connector and only see options that exist in our range.
Fully tested. No brand-tax. Sydney re-coding available if required.

Find Compatible Transceivers

100% Compatible With Equipment From Major Vendors

Coded & tested in our state of the art lab in Sydney

Silver-colored sfp-10g-sr-bcc transceiver module with a white label featuring blue and black text, designed for 850nm wavelength optical communication.
Blue Cable Co®
Cisco

  • Request for a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us