• Juniper compatible EX-SFP-10GE-LRM-BCC 10GBASE-LRM transceiver module
1 1

Blue Cable Co

EX-SFP-10GE-LRM-BCC | Juniper Compatible 10GB Multi-Mode LRM - 220m (10GBASE-LRM)

EX-SFP-10GE-LRM-BCC | Juniper Compatible 10GB Multi-Mode LRM - 220m (10GBASE-LRM)

EX-SFP-10GE-LRM-BCC

In stock:10

$72.60 AUD
$72.60 AUD
$72.60 AUD
Sale Stock Status: Enquire
Taxes included. Shipping calculated at checkout.

Description

The EX-SFP-10GE-LRM-BCC is a drop-in compatible replacement for the Juniper EX-SFP-10GE-LRM. This SFP+ transceiver provides plug-and-play compatibility with Juniper routing, switching, and security platforms that support 10G SFP+ ports. - IEEE 802.3aq 10GBASE-LRM compliance guarantees interoperability with standards-compliant switches and routers - SFP+ form factor with 10 Gbps data rate over multi-mode and select single-mode fibre types - 1310nm wavelength supports up to 220m on FDDI-grade (OM1), OM2, and OM3 multi-mode fibre, or 300m on G.652 single-mode fibre - Digital Diagnostics Monitoring (DOM) via SFF-8472 enables real-time monitoring of temperature, voltage, transmit and receive power - Duplex LC connector for reliable bidirectional communication - Hot-swappable design allows installation and removal without network downtime

Features

• IEEE 802.3aq compliance ensures full 10GBASE-LRM interoperability across multi-vendor environments including Juniper EX-Series, QFX-Series, SRX-Series, MX-Series, and PTX-Series platforms with 10G SFP+ slots
• 1310nm FP laser with electronic dispersion compensation overcomes modal distortion on legacy FDDI-grade and OM1/OM2 multi-mode fibre, enabling 10G upgrades without re-cabling
• Extended reach architecture bridges the gap between short-reach 10GBASE-SR (limited to 26m-82m on OM1/OM2) and long-reach single-mode solutions, maximising ROI on existing multi-mode installations
• SFF-8472 DDM provides real-time access to optical power levels, temperature, and voltage thresholds via CLI or SNMP, simplifying link troubleshooting and proactive maintenance
• Dual fibre LC duplex interface supports separate transmit and receive paths for full-duplex 10G operation with 3.5 dB minimum optical budget
• Commercial temperature range (-5°C to 85°C) suits enterprise data centre and campus distribution environments with typical HVAC control

Warranty

5-Year Advanced Warranty on All Blue Cable Co® Products

Blue Cable Co® offers a comprehensive 5-Year Advanced Warranty on all our branded products. Our advanced warranty ensures fast, hassle-free replacements to keep your network running smoothly. If a fault occurs, we'll deliver a replacement part before you return the faulty itemminimising downtime and giving you complete peace of mind.

Choose Blue Cable Co® for reliable, high-quality network components backed by industry-leading warranty support.

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Technical Specifications

Alternate Part Codes

FAQs

Compatible SFP Selector

Technical Specifications

Brand: Blue Cable Co
BCC SKU: EX-SFP-10GE-LRM-BCC
Compatible Replacement For: EX-SFP-10GE-LRM
Compatibility: Juniper compatible
Lab Testing: Tested in Sydney, Australia
Warranty: 5-year advanced hardware replacement (Blue Cable Co)
Form Factor: SFP+
Data Rate: 10 Gbps
Standard: IEEE 802.3aq 10GBASE-LRM
Wavelength: 1310 nm
Fibre Type: Multi-mode (FDDI/OM1, OM2, OM3) and single-mode (G.652)
Connector Type: Duplex LC
DOM Support: Yes (SFF-8472)
Max Reach: 220m on MMF (FDDI/OM1, OM2, OM3), 300m on SMF (G.652) - subject to fibre quality and link conditions
Operating Temperature: -5°C to 85°C
Power Consumption: 1W maximum
Compliance: SFF-8431, SFF-8432, IEEE 802.3aq

Alternate Part Codes

740-021310, SFP-10G-LRM-C, SFPP-10GE-LRM, SRX-SFP-10GE-LRM

FAQs

Q: Will this work in place of the Juniper EX-SFP-10GE-LRM?
A: Yes. The EX-SFP-10GE-LRM-BCC is designed to the same IEEE 802.3aq 10GBASE-LRM standard, operates at the same 1310nm wavelength and 10 Gbps data rate, and uses the same SFP+ form factor as the Juniper original. It is plug-and-play compatible with Juniper platforms that accept the EX-SFP-10GE-LRM.

Q: Which Juniper platforms support this transceiver?
A: This transceiver is compatible with Juniper platforms that support 10G SFP+ optics, including EX-Series Ethernet Switches, QFX-Series Data Center Switches, SRX-Series Security Gateways, MX-Series Universal Routing Platforms, and PTX-Series Packet Transport Routers. Verify that your specific model has 10G SFP+ ports and runs a Junos or Junos Evolved release that supports 10GBASE-LRM optics.

Q: What fibre types and distances does 10GBASE-LRM support?
A: 10GBASE-LRM supports up to 220m on 62.5/125 µm FDDI-grade (OM1) fibre, 50/125 µm OM2 fibre, and 50/125 µm OM3 fibre, all with 500 MHz·km effective modal bandwidth. It also supports up to 300m on 9/125 µm G.652 single-mode fibre, though this is non-standard. The 1310nm wavelength and electronic dispersion compensation enable these distances on legacy multi-mode infrastructure where 10GBASE-SR would be limited.

Q: Can I mix this LRM transceiver with SR or LR optics on the same link?
A: No. Both ends of a 10G optical link must use transceivers designed for the same fibre type and wavelength. 10GBASE-LRM operates at 1310nm over multi-mode or single-mode fibre, while 10GBASE-SR uses 850nm over multi-mode and 10GBASE-LR uses 1310nm over single-mode with different power budgets. Mixing standards will result in link failure or unreliable operation.

Q: Does this transceiver require FEC or special configuration on Juniper platforms?
A: No. 10GBASE-LRM is a standard 10G Ethernet physical layer and does not require Forward Error Correction (FEC) or custom configuration. The transceiver is detected automatically by Junos and Junos Evolved when inserted into a 10G SFP+ port. DOM parameters are accessible via standard CLI commands (show interfaces diagnostics optics) or SNMP without additional setup.

Compatible SFP Selector

Need a Compatible SFP or QSFP Transceiver?

Use the Blue Cable Co Compatible SFP Selector to quickly filter by vendor compatibility, speed, form factor, fibre type, distance and connector and only see options that exist in our range.
Fully tested. No brand-tax. Sydney re-coding available if required.

Find Compatible Transceivers

100% Compatible With Equipment From Major Vendors

Coded & tested in our state of the art lab in Sydney

Silver-colored sfp-10g-sr-bcc transceiver module with a white label featuring blue and black text, designed for 850nm wavelength optical communication.
Blue Cable Co®
Cisco

  • Request for a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us