-
Vendor:Juniper
Juniper ORHS-1600G-DR8-2-P | OSFP 1.6T DR8 Transceiver, SMF 2km, Dual MPO-12, RHS
ORHS-1600G-DR8-2-P
Stock Status: Enquire
Vendor:JuniperJuniper ORHS-1600G-DR8-2-P | OSFP 1.6T DR8 Transceiver, SMF 2km, Dual MPO-12, RHS
The ORHS-1600G-DR8-2-P is a 1.6 Tbps OSFP optical transceiver module featuring a Riding Heat Sink (RHS) flat-top form factor, purpose-built for liquid-cooled and air-assisted high-density switch platforms. Using DR8 parallel single-mode architecture with 8x 200G PAM4 lanes, it delivers up to 2 km reach over OS2 single-mode fibre via dual MPO-12 connectors — supporting flexible breakout modes of 1x1.6T, 2x800G, 4x400G, or 8x200G for AI fabric, HPC, and next-generation data centre interconnects.
Compliant with the OSFP-XD MSA and managed via CMIS 5.0, this module supports DOM/DDM for real-time diagnostics and operates across a standard commercial temperature range of 0°C to 70°C. It is hot-pluggable and designed to integrate natively into Juniper's high-density platforms. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Juniper
Juniper ORHS-1600G-DR8-2 | OSFP 1.6T DR8 Transceiver, SMF 2km, MPO-16, PAM4
ORHS-1600G-DR8-2
Stock Status: Enquire
Vendor:JuniperJuniper ORHS-1600G-DR8-2 | OSFP 1.6T DR8 Transceiver, SMF 2km, MPO-16, PAM4
The Juniper ORHS-1600G-DR8-2 is a 1.6 Tbps OSFP optical transceiver designed for next-generation AI/ML fabrics, HPC clusters, and hyperscale data centre interconnects. Featuring a Riding Heat Sink (RHS/flat-top) form factor optimised for liquid-cooled or cold-plate switch environments, it uses a DR8 architecture across 8 parallel single-mode fibre lanes with PAM4 modulation at 200 Gbps per lane, delivering 2 km reach over SMF OS2 via an MPO-16 connector at 1310 nm.
This hot-pluggable OSFP module supports Digital Optical Monitoring (DOM/DDM) and CMIS management interface, ensuring full visibility and compatibility within Juniper's 1600G-capable platforms. Compliant with OSFP MSA and IEEE 802.3dj standards, it operates across a standard commercial temperature range of 0°C to 70°C. Available now at iptrading.com.au — competitive prices and local support. -
Vendor:Juniper
Juniper EX-SFP-1GE-T | EX Series 1G Copper SFP Transceiver, RJ-45, 100m
EX-SFP-1GE-T
Stock Status: Enquire
Vendor:JuniperJuniper EX-SFP-1GE-T | EX Series 1G Copper SFP Transceiver, RJ-45, 100m
The Juniper EX Series 1G Copper SFP Transceiver delivers 10/100/1000BASE-T connectivity over standard RJ-45 cabling, providing a flexible and cost-effective alternative to fibre-optic modules. Designed for use with Juniper EX Series switches and routers, it supports auto-negotiation across all three speeds and reaches up to 100 m over Category 5 UTP — making it ideal for enterprise LAN deployments where existing copper infrastructure is already in place.
Compliant with IEEE 802.3i, 802.3u, and 802.3ab standards as well as the SFP Multi-Source Agreement (MSA), this hot-swappable module integrates seamlessly into Juniper EX Series SFP slots without network downtime. Its low power draw and copper media support make it a practical choice for data centre and campus edge connectivity. Order direct from iptrading.com.au — Australian-owned and operated since 2001. -
Vendor:Check Point
Check Point CPAC-TR-1SX-B | 1G SFP Transceiver, 1000Base-SX, Multi-Mode, 550m, LC
CPAC-TR-1SX-B
Stock Status: Enquire
Vendor:Check PointCheck Point CPAC-TR-1SX-B | 1G SFP Transceiver, 1000Base-SX, Multi-Mode, 550m, LC
The CPAC-TR-1SX-B is a genuine Check Point SFP transceiver module delivering 1 Gigabit short-range fibre connectivity over the 1000Base-SX standard. Designed specifically for Check Point security appliances with 1G SFP fibre ports — including the 5200, 5600, 6800, 23500, and 23900 series — it ensures validated compatibility and reliable optical performance within your Check Point environment. Supporting multi-mode fibre over LC duplex connectors, it reaches up to 300m on OM1 (62.5/125 µm) and 550m on OM2 (50/125 µm) fibre.
As an official Check Point genuine accessory, this hot-swappable SFP module delivers specified transmit and receive optical power levels (-2.5 to -9 dBm output, 0 to -18 dBm input) for consistent link integrity. It is ideal for data centre and campus deployments requiring short-range fibre uplinks on Check Point appliances without risking third-party compatibility issues. Order today from iptrading.com.au — your local source for enterprise-grade networking solutions. -
Vendor:Check Point
Check Point CPAC-TR-100SR4-DM | 100G QSFP28 Transceiver, 100GBase-SR4, MMF, MPO/MTP-12
CPAC-TR-100SR4-DM
Stock Status: Enquire
Vendor:Check PointCheck Point CPAC-TR-100SR4-DM | 100G QSFP28 Transceiver, 100GBase-SR4, MMF, MPO/MTP-12
The Check Point CPAC-TR-100SR4-DM is a QSFP28 optical transceiver module delivering 100 Gigabit Ethernet short-range connectivity for Check Point Maestro Hyperscale (MH) appliances. Operating at 850nm over multimode fibre, it supports 100GBase-SR4 via an MPO/MTP-12 connector with a reach of up to 100m on OM4 fibre — ideal for high-density data centre interconnects within the Check Point Maestro ecosystem.
Using four independent 25Gbps lanes to achieve 100Gbps full-duplex aggregate throughput, this transceiver includes Digital Optical Monitoring (DOM) for real-time diagnostics and supports breakout to 4x 25G-SR configurations. It is compliant with QSFP28 MSA and IEEE 802.3bm standards, ensuring interoperability within structured data centre fibre infrastructure. Visit iptrading.com.au to secure your order — enterprise-grade hardware with expert support. -
Vendor:Check Point
Check Point CPAC-TR-100DR-D | QSFP28 100GbE Transceiver, 100GBASE-DR, SMF, 500m, MPO
CPAC-TR-100DR-D
Stock Status: Enquire
Vendor:Check PointCheck Point CPAC-TR-100DR-D | QSFP28 100GbE Transceiver, 100GBASE-DR, SMF, 500m, MPO
The Check Point CPAC-TR-100DR-D is a QSFP28 transceiver module delivering 100GbE connectivity over single-mode fibre, purpose-built for Check Point Quantum security appliances. Compliant with the 100GBASE-DR standard (IEEE 802.3cd), it supports link distances up to 500 metres via MPO/MTP connectors using single-lambda PAM4 signalling — ideal for high-throughput data centre core and enterprise backbone deployments.
This hot-swappable module is compatible with Check Point's 40/100G QSFP expansion modules such as the CPAC-2-40/100-D, enabling seamless integration into existing Quantum appliance infrastructure without additional hardware changes. Available now at iptrading.com.au — competitive prices and local support. -
Vendor:Check Point
Check Point CPAC-DP-100LR4-SM-AMS | 100G QSFP28 Transceiver, Singlemode LR4, 10km, LC
CPAC-DP-100LR4-SM-AMS
Stock Status: Enquire
Vendor:Check PointCheck Point CPAC-DP-100LR4-SM-AMS | 100G QSFP28 Transceiver, Singlemode LR4, 10km, LC
The Check Point CPAC-DP-100LR4-SM-AMS is a 100Gbps QSFP28 pluggable optical transceiver module designed for use with Check Point's DDoS Protector Attack Mitigation Solution (AMS) appliances. Using 100GBASE-LR4 technology with a 4-lane LAN WDM architecture (4 × 25Gbps), it delivers reliable 100G connectivity over singlemode fibre at distances up to 10km via LC Duplex connectors — ideal for high-throughput security deployments in enterprise and data centre environments.
This module is validated for the Check Point AMS ecosystem, ensuring compatibility and performance within Check Point's security appliance infrastructure. The hot-pluggable QSFP28 form factor simplifies installation and maintenance without disrupting live traffic. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Check Point
Check Point CPAC-1500-TR-100BASE-FX-D | Quantum Spark 1570R SFP Transceiver, 100BASE-FX Short Range
CPAC-1500-TR-100BASE-FX-D
Stock Status: Enquire
Vendor:Check PointCheck Point CPAC-1500-TR-100BASE-FX-D | Quantum Spark 1570R SFP Transceiver, 100BASE-FX Short Range
The Check Point Quantum Spark 1570R SFP transceiver delivers reliable 100BASE-FX fast Ethernet fibre connectivity for Check Point SMB security gateways. Designed and validated specifically for the Quantum Spark 1500 series — including the 1570R appliance — this official Check Point accessory ensures full hardware compatibility and vendor support, making it the safest choice for fibre uplink expansion on supported gateways.
The SFP form factor enables straightforward hot-swap installation with no downtime, and compliance with IEEE 802.3u guarantees interoperability with standard 100BASE-FX fibre infrastructure. As an official Check Point accessory, it avoids third-party compatibility risks often encountered with generic transceivers. Upgrade your network with gear from iptrading.com.au — Australia's IT hardware specialists. -
Vendor:Lenovo
Lenovo 7Z57A03559 | 25G SFP28 Passive DAC Cable, 5m, 25GBase-CR1
7Z57A03559
Stock Status: Enquire
Vendor:LenovoLenovo 7Z57A03559 | 25G SFP28 Passive DAC Cable, 5m, 25GBase-CR1
The Lenovo 7Z57A03559 is a 5-metre passive 25G SFP28 Direct Attach Copper (DAC) cable built for high-density server and switch interconnects in ThinkSystem and ThinkAgile environments. Operating at 25 Gbps (25GBase-CR1), its passive copper design eliminates active components, delivering reliable low-latency connectivity with minimal power draw — ideal for top-of-rack and spine-leaf deployments.
This cable is compatible with a broad range of Lenovo platforms including ThinkSystem NE10032, NE2572, and NE2580O RackSwitches, as well as SR250, SR530, SR590, and SR630 servers, and ThinkAgile HX-series appliances and certified nodes. Designed and validated specifically for Lenovo infrastructure to ensure maximum interoperability and performance. In stock and ready to ship from iptrading.com.au — order now for fast dispatch. -
Vendor:Ubiquiti
Ubiquiti UACC-OM-SFP10-1270 | 10G CWDM SFP+ Transceiver, Single-Mode, 20km, 1270nm
UACC-OM-SFP10-1270
In stock
Vendor:UbiquitiUbiquiti UACC-OM-SFP10-1270 | 10G CWDM SFP+ Transceiver, Single-Mode, 20km, 1270nm
The UniFi 10G CWDM SFP+ transceiver delivers high-capacity 10 Gbps connectivity over single-mode fibre at a 1270 nm wavelength, supporting links up to 20 km via duplex LC UPC connectors. Designed for enterprise, data centre, and ISP deployments, it leverages Coarse Wavelength Division Multiplexing (CWDM) technology to carry multiple wavelengths simultaneously over a single fibre strand — maximising existing fibre infrastructure without costly cable upgrades.
Compatible with both SFP+ and SFP interfaces, this module integrates seamlessly with UniFi networking equipment and operates across a wide wavelength range of 1260 to 1620 nm. Used in matched pairs of the same wavelength for CWDM deployments, it is hot-swappable for easy installation and maintenance. Upgrade your network with gear from iptrading.com.au — Australia's IT hardware specialists. -
Vendor:Fortinet
Fortinet SP-CABLE-FS-SFP+3 | 10GE SFP+ Passive DAC Twinax Cable, 3m, 10GBase-CU
SP-CABLE-FS-SFP+3
In stock
Vendor:FortinetFortinet SP-CABLE-FS-SFP+3 | 10GE SFP+ Passive DAC Twinax Cable, 3m, 10GBase-CU
The Fortinet SP-CABLE-FS-SFP+3 is a 10GE SFP+ passive direct attach copper (DAC) twinax cable delivering 10 Gbps connectivity across a 3-metre span — ideal for short-reach, high-density data centre deployments between adjacent racks or top-of-rack switches. As a passive assembly, it draws no power from the cable itself, delivering ultra-low latency and a cost-effective alternative to discrete fibre optic transceivers and patch cables. Compatible with any device featuring SFP+ or SFP/SFP+ slots, it is MSA-compliant and integrates hot-pluggable SFP+ transceivers at both ends for plug-and-play installation.
Designed specifically for use with Fortinet systems including FortiSwitch and FortiGate platforms, this DAC cable supports 10GBASE-CU Ethernet standards and operates reliably across commercial temperature ranges (0°C to 70°C). It simplifies cabling infrastructure while maintaining full 10G line-rate performance — a practical choice for IT teams consolidating rack-to-rack interconnects. Order now at iptrading.com.au — trusted by Australian IT professionals. -
Vendor:Ubiquiti
Ubiquiti UACC-UPLINK-SFP28-30M | SFP28 Direct Attach Fibre Cable, 30M, Auto Link Optimisation, 1G/10G/25G UniFi Interconnects
UACC-UPLINK-SFP28-30M
In stock
Vendor:UbiquitiUbiquiti UACC-UPLINK-SFP28-30M | SFP28 Direct Attach Fibre Cable, 30M, Auto Link Optimisation, 1G/10G/25G UniFi Interconnects
The UACC-Uplink-SFP28-30M is a 30-metre fibre direct attach cable designed for seamless high-speed interconnects between UniFi devices. Supporting data rates of 1G, 10G, and 25G, it features Auto Link Optimisation to automatically negotiate the best link speed and stability across SFP, SFP+, and SFP28 interfaces — making it an ideal solution for flexible UniFi deployments requiring longer cable runs. Built with a durable PVC jacket (3 mm outer diameter), a minimum bend radius of 30 mm, and a clean white finish, this cable is engineered for structured rack and data centre environments. Its guaranteed UniFi compatibility ensures plug-and-play simplicity without the guesswork of third-party transceivers. In stock and ready to ship from iptrading.com.au — order now for fast dispatch. -
Vendor:Arista
Arista SFP-25G-SR-E | 25G SFP28 SR Transceiver, 850nm MMF, LC, No-FEC Low Latency
SFP-25G-SR-E
Stock Status: Enquire
Vendor:AristaArista SFP-25G-SR-E | 25G SFP28 SR Transceiver, 850nm MMF, LC, No-FEC Low Latency
The Arista SFP-25G-SR-E is an Enhanced Performance (E-Series) 25GBASE-SR SFP28 optical transceiver engineered for multimode fibre deployments that demand ultra-low latency operation. Guaranteeing a worst-case BER of less than 1E-12 without FEC, it eliminates the approximately 250ns of additional latency introduced by Forward Error Correction — making it the ideal choice for latency-sensitive environments such as high-frequency trading, financial networks, and Arista 7130B Series ultra-low latency platforms. It supports reach up to 30m/50m over OM3/OM4 MMF without FEC, or up to 50m/100m with FEC enabled.
Compatible with all Arista 25G SFP ports and compliant with IEEE 25GBASE-SR and SFP28 MSA standards, this transceiver integrates seamlessly into existing OM3/OM4 fibre infrastructure without costly upgrades. Built-in Digital Diagnostic Monitoring (DDM) provides real-time visibility into optical link health, and the hot-pluggable design simplifies installation and field maintenance. RoHS compliant. Available now at iptrading.com.au — competitive prices and local support. -
Vendor:Arista
Arista SFP-25G-SR | 25G SFP28 Transceiver, SR, 25GBase-SR, OM3/OM4 MMF
SFP-25G-SR
Stock Status: Enquire
Vendor:AristaArista SFP-25G-SR | 25G SFP28 Transceiver, SR, 25GBase-SR, OM3/OM4 MMF
The Arista SFP-25G-SR is a 25GBase-SR SFP28 short-reach optical transceiver designed for high-density data centre and enterprise backbone deployments. Supporting dual-rate 10G/25G operation, it delivers reliable connectivity over multimode fibre — up to 70 metres on OM3 MMF and up to 100 metres on OM4 MMF — making it an ideal choice for top-of-rack server interconnects, spine-leaf cabling, and storage area network links. The LC duplex interface and 850 nm VCSEL light source provide the low-latency, high-bandwidth performance that modern 25G infrastructure demands.
This transceiver is compatible with Arista 7000-series switches and platforms supporting 25GBase-SR SFP28 ports, and its dual-rate capability also allows interoperability with 10GBase-SR equipment for phased migration scenarios. As a genuine Arista-coded module, it is fully supported under Arista EOS with digital optical monitoring (DOM) for real-time diagnostics. Visit iptrading.com.au to secure your order — enterprise-grade hardware with expert support. -
Vendor:Arista
Arista SFP-25G-MR-XSR | 25GBASE-SR SFP28 Transceiver, Dual Rate 10/25G, 300m OM4
SFP-25G-MR-XSR
Stock Status: Enquire
Vendor:AristaArista SFP-25G-MR-XSR | 25GBASE-SR SFP28 Transceiver, Dual Rate 10/25G, 300m OM4
The Arista SFP-25G-MR-XSR is a dual-rate 10/25GBASE-SR Extended Reach (XSR) SFP28 optical transceiver built for low-latency data centre and campus deployments over multimode fibre. Operating at 850nm, it delivers extended reach versus standard SR optics — up to 200m/300m over OM3/OM4 at 25G and up to 300m/400m over OM3/OM4 at 10G — making it ideal for spine-leaf fabrics, server connectivity, and network upgrade scenarios where longer MMF runs are required without moving to single-mode.
As part of Arista's E-Series optical transceiver portfolio, this module supports low-latency operation without FEC and optical interoperability with legacy 10G-SR SFPs when running at 10G, protecting existing infrastructure investments during 25G migration. Digital Diagnostic Monitoring (DDM) enables real-time visibility into optical parameters. Requires EOS 4.24.2 or later. Order now at iptrading.com.au — trusted by Australian IT professionals. -
Vendor:Arista
Arista SFP-25G-MR-SR | 10/25G Dual Rate SFP28 Transceiver, 850nm, MMF, LC
SFP-25G-MR-SR
Stock Status: Enquire
Vendor:AristaArista SFP-25G-MR-SR | 10/25G Dual Rate SFP28 Transceiver, 850nm, MMF, LC
The Arista SFP-25G-MR-SR is a dual rate 10/25GBASE-SR SFP28 optical transceiver designed for multimode fibre deployments in data centre and enterprise environments. Operating at either 10G or 25G in a single module, it delivers up to 300m/400m over OM3/OM4 MMF at 10G and up to 70m/100m over OM3/OM4 MMF at 25G. Its ability to optically interoperate with standard 10G-SR transceivers when running at 10G makes it an ideal solution for phased network upgrades from 10G to 25G infrastructure.
Built around an 850nm VCSEL transmitter with LC duplex connectivity, the SFP-25G-MR-SR supports Digital Optical Monitoring (DOM) for real-time diagnostics and is fully RoHS compliant. It conforms to SFP28 MSA, IEEE 802.3by, and SFF standards for broad platform compatibility. Get it now at iptrading.com.au — authentic hardware, reliable service.
Trusted ICT Solutions Backed by 20+ Years of Expertise
At IP Trading, we specialise in delivering high-quality ICT products and solutions tailored to business, government, and enterprise needs. With over two decades of experience, we provide seamless procurement, expert support, and competitive pricing on a vast range of networking, security, server, storage, and power solutions. Our dedicated account managers ensure streamlined interactions with preferred vendors, eliminating time-consuming follow-ups while offering expert advice on project design, sourcing, and implementation.
Why Choose IP Trading?
We are a trusted supplier to Federal, State, and Local Government departments, Not-for-Profit organisations, and businesses of all sizes. Our team of experts in technical sales, logistics, finance, and account management ensures efficiency at every stage—from presales consultation to contract negotiation. As a registered supplier on the Australian Government’s DTA Hardware Marketplace and a prequalified ICT provider for NSW and QLD Government projects, we bring credibility and reliability to every transaction. Partner with IP Trading for flexible, innovative, and cost-effective ICT solutions tailored to your needs.