-
Vendor:Juniper
Juniper SFP-GE10KT13R15 | 1G SFP BiDi Transceiver, 1000BASE-BX10 Uplink, Tx1310/Rx1550nm, 10km
SFP-GE10KT13R15
Stock Status: Enquire
Vendor:JuniperJuniper SFP-GE10KT13R15 | 1G SFP BiDi Transceiver, 1000BASE-BX10 Uplink, Tx1310/Rx1550nm, 10km
The Juniper SFP-GE10KT13R15 is a 1 Gbps BiDi (bidirectional) SFP transceiver designed for 1000BASE-BX10 UPLINK applications over a single strand of single-mode fibre (SMF). Transmitting at 1310 nm and receiving at 1550 nm, it delivers a 10 km reach via a simplex LC connector — halving your fibre cabling costs compared to conventional dual-strand transceivers. Digital Diagnostic Monitoring (DDM) provides real-time visibility into transceiver health, including temperature, voltage, and optical power levels.
This UPLINK transceiver must be paired with a compatible DOWNLINK SFP such as the SFP-GE10KT15R13 or SFP-GE10KT14R13. It is MSA-compliant and supported across a broad range of Juniper platforms including MX240, MX480, MX960, M120, M320, T640, T1600, and E-Series routers. Operating across standard temperatures (0 to 70°C), it is suited to enterprise and service provider environments. Buy today from iptrading.com.au — fast shipping and expert service across Australia. -
Vendor:Juniper
Juniper SFP-1GE-T | 1000BASE-T SFP Copper Transceiver, RJ-45, 100m, Industrial Temp
SFP-1GE-T
Stock Status: Enquire
Vendor:JuniperJuniper SFP-1GE-T | 1000BASE-T SFP Copper Transceiver, RJ-45, 100m, Industrial Temp
The Juniper SFP-1GE-T is a 1000BASE-T SFP copper transceiver module designed for Juniper routing platforms, delivering 1 Gbps autosensing connectivity over Cat 5e cable up to 100 metres via a standard RJ-45 connector. With an industrial operating temperature range of –40°C to 85°C, it is purpose-built for demanding environments where commercial-grade optics fall short — making it ideal for edge, industrial, and outdoor cabinet deployments.
The SFP-1GE-T integrates seamlessly into Junos OS and Junos OS Evolved, with full PHY management accessible via I2C for telemetry and monitoring. It is supported across a broad range of Juniper routing platforms including ACX710, ACX5448, ACX7024, ACX7509, MX5, MX10, MX40, and MX80. The hot-swappable SFP form factor allows for zero-downtime replacement and leverages existing Cat 5e copper infrastructure. Need it fast? iptrading.com.au delivers across Australia — shop now. -
Vendor:Juniper
Juniper SFP-1GE-LX | 1GE SFP Transceiver, 1000BASE-LX, SMF 10km/MMF 550m, Ext Temp
SFP-1GE-LX
Stock Status: Enquire
Vendor:JuniperJuniper SFP-1GE-LX | 1GE SFP Transceiver, 1000BASE-LX, SMF 10km/MMF 550m, Ext Temp
The Juniper SFP-1GE-LX is a 1000BASE-LX Gigabit Ethernet SFP transceiver designed for enterprise and service provider deployments requiring reliable fibre connectivity over extended distances. Operating at 1310nm, it supports up to 10km on single-mode fibre (SMF 9/125 µm) or 550m on multimode fibre (MMF 50/125 or 62.5/125 µm) via a duplex LC connector, making it a versatile choice for campus backbone and inter-building links. The extended operating temperature range of -5 to +70°C suits deployments in environments where standard commercial-grade optics fall short.
Compliant with IEEE 802.3z and SFP MSA standards, this hot-pluggable module operates on a single +3.3V supply and is RoHS certified. It is validated for use with Juniper JX Series platforms and is Class 1 laser certified (IEC 60825-1). Order today from iptrading.com.au — your local source for enterprise-grade networking solutions. -
Vendor:Juniper
Juniper SFP-1GE-LH | 1G SFP Transceiver, Single-Mode, 70km, Industrial Temp (-40~85°C)
SFP-1GE-LH
Stock Status: Enquire
Vendor:JuniperJuniper SFP-1GE-LH | 1G SFP Transceiver, Single-Mode, 70km, Industrial Temp (-40~85°C)
The Juniper SFP-1GE-LH is a 1000BASE-LH Gigabit Ethernet SFP transceiver engineered for long-reach single-mode fibre links up to 70 km at 1550 nm. Built with an industrial temperature rating of -40°C to 85°C, it is purpose-built for demanding deployments in harsh environments, remote sites, and extended campus or WAN interconnects where standard commercial-grade optics would fail. The duplex LC connector and hot-pluggable SFP form factor simplify installation and maintenance across Juniper routing and switching platforms.
Compatible with a broad range of Juniper platforms including MX240, MX480, MX960, M120, M320, T320, T640, SRX3400, and SRX3600, this module integrates seamlessly into existing Juniper infrastructure. Note that optical attenuation may be required on shorter links due to high transmit power. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Juniper
Juniper SFP-1FE-FX | 100BASE-FX SFP Transceiver, Multimode, 1310nm, 2km, LC
SFP-1FE-FX
Stock Status: Enquire
Vendor:JuniperJuniper SFP-1FE-FX | 100BASE-FX SFP Transceiver, Multimode, 1310nm, 2km, LC
The Juniper SFP-1FE-FX is a 100BASE-FX Fast Ethernet SFP transceiver module designed for Juniper MX Series routing platforms including the MX240, MX480, and MX960. Operating at 1310nm over multimode fibre (62.5/125µm), it delivers reliable 100 Mbps connectivity at reaches up to 2km via LC Duplex connector — ideal for campus and data centre interconnects requiring proven Fast Ethernet fibre links.
This standard temperature variant is MSA (Multi-Source Agreement) compliant and hot-swappable for seamless field replacement with no network downtime. RoHS compliant and purpose-built for Juniper routing environments, it offers a cost-effective fibre uplink solution for legacy and mixed-speed deployments. Upgrade your network with gear from iptrading.com.au — Australia's IT hardware specialists. -
Vendor:Juniper
Juniper SFP-1GE-FE-E-T | 1G SFP Copper Transceiver, RJ-45, 100m, Industrial Temp -40 to +85°C
SFP-1GE-FE-E-T
Stock Status: Enquire
Vendor:JuniperJuniper SFP-1GE-FE-E-T | 1G SFP Copper Transceiver, RJ-45, 100m, Industrial Temp -40 to +85°C
The Juniper SFP-1GE-FE-E-T is a tri-speed copper SFP transceiver delivering 10/100/1000BASE-T auto-negotiation over standard Category 5 shielded twisted-pair cabling at distances up to 100 metres. Rated for an industrial operating temperature range of -40°C to +85°C, it is purpose-built for ruggedised and harsh-environment deployments — including outdoor cabinets, factory floors, and transportation infrastructure — where commercial-grade optics would fail.
Compatible with Juniper MX240, MX480, and MX960 platforms, this hot-pluggable SFP module draws just 1 W maximum, keeping chassis power budgets lean. It conforms to SFP Multi-Source Agreement (MSA) standards and is fully qualified and tested by Juniper Networks for seamless integration. Order direct from iptrading.com.au — Australian-owned and operated since 2001. -
Vendor:Juniper
Juniper QSFP-100G-ER4L | 100G QSFP28 ER4 Lite Transceiver, Single-Mode, 40km, LC
QSFP-100G-ER4L
Stock Status: Enquire
Vendor:JuniperJuniper QSFP-100G-ER4L | 100G QSFP28 ER4 Lite Transceiver, Single-Mode, 40km, LC
The Juniper QSFP-100G-ER4L is a 100GBASE-ER4 Lite QSFP28 single-mode fibre transceiver engineered for extended-reach data centre interconnects and enterprise core network links up to 40 km. Operating over LC duplex connectors at 1310 nm using CWDM4 wavelengths, it delivers full 100 Gbps throughput across standard SMF with a standard temperature operating range of 0°C to 70°C. It is purpose-built for deployment in Juniper QFX and PTX series platforms requiring long-haul 100G connectivity without the cost of full ER4 optics.
The ER4 Lite specification reduces launch power requirements compared to full ER4, making it cost-effective for campus and metro interconnects where the full 40 km reach is still essential. Compatible with Juniper's native optics ecosystem, this transceiver ships with a Juniper-coded EEPROM for seamless plug-and-play operation. Need it fast? iptrading.com.au delivers across Australia — shop now. -
Vendor:Juniper
Juniper QSFPP-40GBASE-SR4 | 40G QSFP+ SR4 Transceiver, Multimode, 100m OM3 / 150m OM4, MPO-12
QSFPP-40GBASE-SR4
Stock Status: Enquire
Vendor:JuniperJuniper QSFPP-40GBASE-SR4 | 40G QSFP+ SR4 Transceiver, Multimode, 100m OM3 / 150m OM4, MPO-12
The QSFPP-40GBASE-SR4 is a 40 Gigabit QSFP+ SR4 multimode fibre transceiver designed for short-range data centre and campus interconnects. Operating at 850nm over MPO-12 connectors, it delivers reliable 40GbE connectivity up to 100m on OM3 and 150m on OM4 multimode fibre — making it ideal for spine-to-leaf, server-to-switch, and inter-rack links. As a Juniper Common Optic, a single SKU is certified across MX-Series routers, PTX-Series packet transport routers, EX-Series switches, and QFX-Series data centre switches.
Full Digital Optical Monitoring (DOM) via SFF-8636 provides real-time telemetry — including laser bias, RX power, temperature, and supply voltage — directly through the Junos/EVO CLI. The hot-swappable pluggable design simplifies installation and maintenance with no network downtime. Buy today from iptrading.com.au — fast shipping and expert service across Australia. -
Vendor:Allied Telesis
Allied Telesis AT-SPFX/2-90 | 100FX SFP Transceiver, Multi-Mode, 2km, 1310nm, LC, TAA Compliant
AT-SPFX/2-90
In stock
Vendor:Allied TelesisAllied Telesis AT-SPFX/2-90 | 100FX SFP Transceiver, Multi-Mode, 2km, 1310nm, LC, TAA Compliant
The AT-SPFX/2-90 is a TAA-compliant 100Base-FX SFP transceiver module delivering full-duplex Fast Ethernet connectivity over multi-mode fibre at up to 2km reach via a dual LC connector. Designed for Australian government and federal procurement environments where Trade Agreements Act compliance is mandatory, it is hot-swappable and plug-and-play ready for instant deployment in any SFP-capable Allied Telesis switch, router, NIC, or media converter.
Operating at 1310nm with 100 Mbps throughput, this module supports standard 100FX cabling infrastructure and integrates seamlessly into existing Allied Telesis ecosystems. Its compact SFP form factor and broad operating temperature range of 0°C to 70°C make it suitable for a wide range of enterprise and government edge deployments. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:ATEN
ATEN 2A-145G | 10GbE Copper SFP+ Transceiver, RJ-45, Cat6a/7, 30m
2A-145G
Stock Status: Enquire
Vendor:ATENATEN 2A-145G | 10GbE Copper SFP+ Transceiver, RJ-45, Cat6a/7, 30m
The ATEN 2A-145G is a 10Gb Ethernet Copper SFP+ Transceiver that delivers high-speed 10 Gbps connectivity over standard Cat 6a or Cat 7 copper cabling — no fibre infrastructure required. Designed for deployment in data centres and enterprise environments, it slots directly into SFP+ ports and supports cable runs up to 30 metres, making it a cost-effective alternative to optical transceivers for short-reach applications. It is fully compliant with IEEE 802.3az (Energy-Efficient Ethernet) and IEEE 802.3bz standards.
The 2A-145G is specifically compatible with ATEN KG0016 and KG0032 KVM switches equipped with SFP+ ports, enabling seamless integration into existing copper-based network infrastructure. Its compact SFP+ form factor and plug-and-play design ensure fast, flexible deployment without additional configuration. Visit iptrading.com.au to secure your order — enterprise-grade hardware with expert support. -
Vendor:Blue Cable Co
GLC-EZX-SM-120-BCC | Cisco Compatible 1GB Single-Mode 120km SFP (1000BASE-EZX)
GLC-EZX-SM-120-BCC
Stock Status: Enquire
Vendor:Blue Cable CoGLC-EZX-SM-120-BCC | Cisco Compatible 1GB Single-Mode 120km SFP (1000BASE-EZX)
The GLC-EZX-SM-120-BCC is a Cisco compatible 1GB single-mode SFP transceiver rated for links up to 120km over 9/125µm SMF fibre. Fitted with a 1550nm DFB laser transmitter and APD receiver, it delivers a 32dB link budget suitable for metro and access network applications. The module is plug-and-play, hot-pluggable, and ships with DDM support for real-time monitoring of optical parameters. Every unit is tested in Blue Cable Co's state of the art lab in Sydney to ensure compatibility with Cisco platforms.
- Cisco compatible drop-in replacement for GLC-EZX-SM-120 applications
- 1.25Gb/s data rate over single-mode fibre, up to 120km reach
- 1550nm DFB laser transmitter with APD receiver and 32dB link budget
- Hot-pluggable SFP form factor with duplex LC connector
- DDM/DOM support compliant with SFF-8472 for live monitoring of temperature, voltage, bias current, and optical power
- Available in commercial (0 to 70°C), extended (-5 to 85°C), and industrial (-40 to 85°C) temperature variants
- RoHS compliant and lead free
- 5-year advanced hardware replacement warranty backed by Blue Cable Co
-
Vendor:Juniper
Juniper ORHS-800G-VR8-P | 800G OSFP-RHS VR8 Transceiver, MMF, 50m, Dual MPO-12
ORHS-800G-VR8-P
Stock Status: Enquire
Vendor:JuniperJuniper ORHS-800G-VR8-P | 800G OSFP-RHS VR8 Transceiver, MMF, 50m, Dual MPO-12
The Juniper ORHS-800G-VR8-P is an 800G OSFP Riding Heatsink (OSFP-RHS) optical transceiver designed for ultra-high-density data centre and AI/ML cluster deployments. Operating at 800GBASE-VR8 over multimode fibre (OM4) up to 50 metres, it uses an 8-lane VCSEL-based PAM4 architecture with dual MPO-12 APC connectors, delivering native 800G connectivity alongside flexible breakout modes for 2x400G, 4x200G, and 8x100G configurations. The detached Riding Heatsink design provides enhanced thermal management critical in high-port-density chassis environments.
Qualified for Juniper PTX and QFX 800GbE-capable platforms, this transceiver integrates seamlessly with Junos OS and Junos OS Evolved for full optics recognition and management. It complies with IEEE 802.3 800GBASE-VR8, OSFP MSA, and CMIS 5.3 standards, ensuring broad interoperability. Full JTAC support is available when purchased through authorised Juniper Networks channels. Need it fast? iptrading.com.au delivers across Australia — shop now. -
Vendor:Juniper
Juniper ORHS-800G-FR4 | 800G FR4 OSFP Transceiver, SMF, 2km, Riding Heatsink, LC
ORHS-800G-FR4
Stock Status: Enquire
Vendor:JuniperJuniper ORHS-800G-FR4 | 800G FR4 OSFP Transceiver, SMF, 2km, Riding Heatsink, LC
The Juniper ORHS-800G-FR4 is an 800G OSFP optical transceiver module engineered for hyperscale data centres, AI/ML clusters, and high-performance computing environments demanding maximum port density. Featuring an 800GBASE-FR4 interface over single-mode fibre at up to 2km reach, it uses 8-lane PAM4 modulation and dual duplex LC connectors, delivering 2x400G FR4 breakout capability for flexible spine-leaf and AI fabric deployments. The distinctive riding heatsink design ensures reliable thermal management in air-cooled platforms such as the Juniper QFX5240.
Operating across standard commercial temperatures (0–70°C), this module supports Digital Diagnostics Monitoring (DDM), KP4 Forward Error Correction, and CMIS-compliant firmware upgrades via CDB, giving operations teams full real-time visibility and remote manageability. IEEE 802.3ck compliant and OSFP MSA certified, it integrates cleanly into next-generation 800G switching infrastructure. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Juniper
Juniper ORHS-800G-DR8-2-P | 800G OSFP Transceiver, DR8-2 SMF 2km, Dual MPO-12
ORHS-800G-DR8-2-P
Stock Status: Enquire
Vendor:JuniperJuniper ORHS-800G-DR8-2-P | 800G OSFP Transceiver, DR8-2 SMF 2km, Dual MPO-12
The Juniper ORHS-800G-DR8-2-P is an 800GBASE-DR8-2 OSFP800 optical transceiver with a Riding Heatsink (RHS) form factor, delivering 800 Gbps aggregate throughput over single-mode fibre up to 2km. Designed for high-density data centre and AI/ML cluster deployments, it uses PAM4 modulation across 8 parallel single-wavelength fiber pairs and connects via dual MPO-12/APC receptacles — enabling flexible breakout to 2x400G DR4 or 8x100G DR1 configurations. Qualified for Juniper's PTX and QFX 800GbE-capable product families, this transceiver is purpose-built for next-generation spine and AI fabric interconnects.
The 9.5mm tall Riding Heatsink module integrates seamlessly with Junos OS and Junos OS Evolved for automatic optics recognition and digital diagnostic monitoring via CMIS compliance. Operating across 0°C to 70°C, it supports standard commercial environments and draws approximately 16–18W. Full technical support is backed by the Juniper Networks Technical Assistance Center (JTAC). Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Juniper
Juniper ORHS-800G-DR4-2 | 800G DR4 OSFP RHS Transceiver, 2km SMF, Dual MPO-12
ORHS-800G-DR4-2
Stock Status: Enquire
Vendor:JuniperJuniper ORHS-800G-DR4-2 | 800G DR4 OSFP RHS Transceiver, 2km SMF, Dual MPO-12
The Juniper ORHS-800G-DR4-2 is an 800G OSFP RHS (Riding Heat Sink) optical transceiver engineered for high-density data centre, AI/ML cluster, and core network deployments. Delivering 800G throughput via 2x400G DR4 channels across up to 2km of single-mode fibre, it uses PAM4 modulation with 8x100Gbps lanes over a dual MPO-12 connector interface. Qualified for Juniper's 800GbE-capable PTX and QFX platforms, it integrates natively with Junos OS and Junos OS Evolved for seamless optics management and monitoring.
The RHS form factor — a 9.5mm tall pluggable module with a riding heat sink — is purpose-built for host systems requiring external thermal management and is not interchangeable with standard OSFP-IHS slots. It supports 2x400G DR4 breakout configurations, complies with IEEE 802.3ck, OSFP MSA, and CMIS Rev 5.0 standards, and includes full Digital Diagnostics Monitoring (DDM/DOM). Every module undergoes system-level power, thermal, and DVT validation by Juniper, with full JTAC support included. Available now at iptrading.com.au — competitive prices and local support. -
Vendor:Juniper
Juniper ORHS-2X800G-FR4-P | 1.6T OSFP224 Transceiver, 2x800G FR4, SMF, 2km, Duplex LC
ORHS-2X800G-FR4-P
Stock Status: Enquire
Vendor:JuniperJuniper ORHS-2X800G-FR4-P | 1.6T OSFP224 Transceiver, 2x800G FR4, SMF, 2km, Duplex LC
The Juniper ORHS-2X800G-FR4-P is a 1.6T OSFP224 optical transceiver module designed for high-density AI, HPC, and hyperscale data centre deployments. Delivering 2x800G via 800GBASE-FR4 over single-mode fibre to 2km, it features a Riding Heat Sink (RHS) flat-top form factor for optimised chassis thermal management. Dual duplex LC connectors support flexible cabling configurations, and the module is rated for standard commercial operating temperatures from 0°C to 70°C.
Built on PAM4 modulation across 8x200G electrical lanes, this module supports 2x800G breakout applications and includes Digital Optical Monitoring (DOM) for real-time link diagnostics. It is OSFP MSA-compliant and compatible with Juniper QFX and PTX series platforms featuring OSFP224 slots. Upgrade your network with gear from iptrading.com.au — Australia's IT hardware specialists.
Trusted ICT Solutions Backed by 20+ Years of Expertise
At IP Trading, we specialise in delivering high-quality ICT products and solutions tailored to business, government, and enterprise needs. With over two decades of experience, we provide seamless procurement, expert support, and competitive pricing on a vast range of networking, security, server, storage, and power solutions. Our dedicated account managers ensure streamlined interactions with preferred vendors, eliminating time-consuming follow-ups while offering expert advice on project design, sourcing, and implementation.
Why Choose IP Trading?
We are a trusted supplier to Federal, State, and Local Government departments, Not-for-Profit organisations, and businesses of all sizes. Our team of experts in technical sales, logistics, finance, and account management ensures efficiency at every stage—from presales consultation to contract negotiation. As a registered supplier on the Australian Government’s DTA Hardware Marketplace and a prequalified ICT provider for NSW and QLD Government projects, we bring credibility and reliability to every transaction. Partner with IP Trading for flexible, innovative, and cost-effective ICT solutions tailored to your needs.