-
Vendor:Fortinet
Fortinet FAP-23JK-H | Wi-Fi 7 Tri-Band Wall Plate AP, 2.4/5/6GHz, 1x 10G
FAP-23JK-H
Stock Status: Enquire
Vendor:FortinetFortinet FAP-23JK-H | Wi-Fi 7 Tri-Band Wall Plate AP, 2.4/5/6GHz, 1x 10G
The FortiAP-23JK is a Wi-Fi 7 tri-band wall plate access point designed for high-density enterprise deployments in hospitality, education, and corporate environments where a discreet, in-room network connection point is required. Operating across 2.4 GHz, 5 GHz, and 6 GHz bands simultaneously with a 2+2+2 stream configuration and three dedicated radios, it delivers next-generation wireless performance with internal antennas for a clean aesthetic finish. A 1x 10G uplink port ensures backhaul capacity keeps pace with Wi-Fi 7 throughput demands, while Bluetooth and BLE support enables IoT and location-based services integration. The built-in 802.3af PoE PSE port allows a downstream device such as a VoIP handset or IP camera to be powered directly from the wall plate.
The FAP-23JK includes three RJ45 ports (one PoE PSE output and two non-PoE) alongside a serial RJ45 console port, making it a practical wired and wireless consolidation point for guest rooms and open-plan workspaces. It integrates seamlessly into the Fortinet Security Fabric, managed via FortiGate or FortiLAN Cloud for centralised policy enforcement, RF optimisation, and zero-trust network access. A wall plate mounting kit is included in the box for straightforward installation into standard single-gang wall boxes. Upgrade your network with gear from iptrading.com.au — Australia's IT hardware specialists. -
Vendor:Fortinet
Fortinet FAP-231K-H | Wi-Fi 7 Tri-Band Indoor Access Point, 2x2 MU-MIMO, 5GbE
FAP-231K-H
In stock
Vendor:FortinetFortinet FAP-231K-H | Wi-Fi 7 Tri-Band Indoor Access Point, 2x2 MU-MIMO, 5GbE
The FortiAP 231K is an enterprise-grade Wi-Fi 7 (802.11be) indoor access point delivering tri-band coverage across 2.4 GHz, 5 GHz, and 6 GHz simultaneously, with 2x2 MU-MIMO on each radio for aggregate speeds up to 9.3 Gbps. Designed for high-density corporate environments, it integrates natively with FortiGate WLAN controllers and FortiEdge Cloud, making it a natural fit for organisations already running Fortinet Security Fabric. A built-in BLE/ZigBee radio extends its value to IoT beaconing and location services, while the 5GbE uplink (100/1000/2500/5000 Base-T) ensures the backhaul keeps pace with Wi-Fi 7 throughput.
Beyond connectivity, the FAP-231K delivers enterprise security at the wireless edge — with integrated WIDS/WIPS, Zero Trust Network Access (ZTNA), application control, IPS, and web filtering built in. Background scanning operates across all bands without disrupting client service, and FortiSASE readiness supports microbranch cloud-managed deployments. Ceiling and wall mount hardware is included in the box; a PoE+ injector or AC adapter (sold separately) is required for power. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Fortinet
Fortinet FAP-222KL-H | Outdoor Wi-Fi 7 AP + LoRaWAN Gateway, LTE, 2.4/5 GHz
FAP-222KL-H
Stock Status: Enquire
Vendor:FortinetFortinet FAP-222KL-H | Outdoor Wi-Fi 7 AP + LoRaWAN Gateway, LTE, 2.4/5 GHz
The FortiAP-222KL is a ruggedised outdoor Wi-Fi 7 (802.11be) access point and LoRaWAN gateway designed for demanding outdoor enterprise deployments. Combining dual-band 2.4/5 GHz Wi-Fi 7 with a dual-chipset LoRaWAN gateway and integrated LTE connectivity, it delivers multi-technology wireless coverage from a single outdoor unit — ideal for smart campuses, industrial sites, logistics yards, and IoT-dense environments. Five external antennas and 2+2 spatial streams ensure reliable high-throughput Wi-Fi alongside broad LoRaWAN sensor network coverage.
Connectivity is provided via a primary 2.5G Base-T RJ45 port and a secondary 10/100/1000 RJ45 port with 802.3af PoE PSE output, enabling downstream device powering in the field. As part of the FortiAP ecosystem, the FAP-222KL integrates natively with FortiGate security fabric and FortiLAN Cloud, giving network administrators unified wired, wireless, and IoT visibility from a single pane of glass. Order now at iptrading.com.au — trusted by Australian IT professionals. -
Vendor:Fortinet
Fortinet FAP-221K-N | Wi-Fi 7 Dual-Band Indoor Access Point, 2x2, 2.5G
FAP-221K-N
Stock Status: Enquire
Vendor:FortinetFortinet FAP-221K-N | Wi-Fi 7 Dual-Band Indoor Access Point, 2x2, 2.5G
The FortiAP-221K is a Wi-Fi 7 (IEEE 802.11be) indoor wireless access point designed for secure, high-performance campus and branch deployments. Supporting dual-band 2.4 GHz and 5 GHz with 2x2 MIMO across two radios, it delivers next-generation wireless performance with a 2.5G Base-T uplink port, integrated Bluetooth/BLE for IoT connectivity, and a built-in RS-232 serial port. Managed seamlessly via any FortiGate integrated WLAN controller or FortiEdge Cloud, it plugs directly into Fortinet's Security Fabric for unified wired and wireless threat protection.
The FAP-221K-N includes a ceiling and wall mount kit and ships without a power source — order a compatible 802.3at PoE injector such as the GPI-130 separately. It supports WPA3/WPA2 with 802.1x, WIDS/WIPS, integrated Firewall, IPS, Application Control, and Web Filtering — all managed from a single pane of glass. Built-in ZTNA and SASE foundations future-proof your wireless edge, and PCI DSS compliance support makes it suitable for regulated environments. Order now at iptrading.com.au — trusted by Australian IT professionals. -
Vendor:Fortinet
Fortinet FAP-221K-H | Wi-Fi 7 Dual-Band Indoor Access Point, 2x2, 2.5GbE
FAP-221K-H
Stock Status: Enquire
Vendor:FortinetFortinet FAP-221K-H | Wi-Fi 7 Dual-Band Indoor Access Point, 2x2, 2.5GbE
The FortiAP-221K is a Wi-Fi 7 (IEEE 802.11be) indoor wireless access point built for campus and branch deployments demanding high-throughput, low-latency connectivity. Delivering dual-band 2.4GHz and 5GHz operation with 2x2 MU-MIMO across two spatial streams, it connects via a 2.5GbE (100/1000/2500 Base-T) RJ45 port, ensuring the uplink keeps pace with Wi-Fi 7 throughput. Internal antennas provide a clean, unobtrusive ceiling or wall-mount installation — hardware included — while integrated Bluetooth/BLE supports IoT device onboarding. A built-in RS-232 serial port adds flexibility for out-of-band management.
Centrally managed through FortiGate's integrated WLAN controller, FortiEdge Cloud, or FortiSASE, the FAP-221K sits natively within the Fortinet Security Fabric for single-pane-of-glass policy enforcement across wired and wireless infrastructure. Security features include WIDS/WIPS, WPA3/WPA2 support, and a Zero Trust Network Access (ZTNA) foundation. PoE+ (802.3at) powered — pair with a GPI-130 PoE injector or compatible PoE+ switch. Contact iptrading.com.au — your local source for enterprise-grade networking solutions. -
Vendor:Teltonika
Teltonika PR1KCN40 | 5G Mobile + GNSS Combo SMA Antenna, 4 dBi, 40 dB LNA
PR1KCN40
In stock
Vendor:TeltonikaTeltonika PR1KCN40 | 5G Mobile + GNSS Combo SMA Antenna, 4 dBi, 40 dB LNA
The Teltonika PR1KCN40 is a 5G combo antenna combining mobile cellular and active GNSS reception in a single unit, connected via SMA Male connectors. Covering 617–960, 1710–2690, and 2900–4200 MHz for 5G sub-6GHz mobile bands, plus 1164–1300 and 1559–1610 MHz for GNSS, it delivers 4.0 dBi mobile gain and a 40 ± 2 dB LNA gain for precise satellite positioning. Designed specifically for Teltonika 5G routers such as the RUTX50 and TRB500, it is an ideal upgrade for IoT, M2M, and fleet tracking deployments requiring simultaneous cellular data and GNSS location services.
The GNSS element features Right-Hand Circular Polarisation (RHCP) for optimal satellite signal acquisition, with a low V.S.W.R of ≤2.0 and a supply voltage range of 3–12 VDC to suit varied installations. The mobile element's 50 Ω impedance and linear polarisation ensure reliable 5G and LTE connectivity across challenging environments. Visit iptrading.com.au to secure your order — enterprise-grade hardware with expert support. -
Vendor:OPENGEAR
OPENGEAR 569042 | Blade Cellular Antenna, 617–6000 MHz, 3W, 50Ω, Vertical
569042
Stock Status: Enquire
Vendor:OPENGEAROPENGEAR 569042 | Blade Cellular Antenna, 617–6000 MHz, 3W, 50Ω, Vertical
The Opengear 569042 is a wide-band blade cellular antenna covering 617 MHz to 6000 MHz, making it compatible with LTE, LTE-A Pro, and 5G sub-6GHz frequency bands. Rated at 3W with a standard 50-ohm impedance, this vertical blade antenna is designed for reliable cellular connectivity in device server deployments — particularly with the Opengear OM2200 Device Server. Sold as a pack of two, it is the direct replacement for the Opengear 569041.
The blade-style form factor and vertical orientation allow for flexible installation in both indoor and outdoor environments, delivering consistent signal performance across a broad spectrum. Its 50-ohm impedance ensures straightforward compatibility with standard RF hardware and coaxial connections. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:OPENGEAR
OPENGEAR 569028 | 5in Blade 4G LTE/3G Multi-Band Swivel Antenna, 7-Band
569028
Stock Status: Enquire
Vendor:OPENGEAROPENGEAR 569028 | 5in Blade 4G LTE/3G Multi-Band Swivel Antenna, 7-Band
The Opengear 569028 is a 5-inch blade 4G LTE/3G multi-band swivel antenna engineered for reliable out-of-band cellular connectivity in enterprise networking deployments. Supporting seven frequency bands spanning 700 MHz to 2600 MHz, this compact antenna ensures broad carrier compatibility across Australian and international LTE/3G networks. With a 0–3 dBi gain and swivel SMA male connector, it delivers precise repositioning capability to optimise signal reception in tight equipment bay or rack environments.
Designed specifically for use with Opengear LMX devices, the 569028 integrates seamlessly into Opengear's out-of-band management infrastructure, providing resilient cellular failover and remote access connectivity. The durable black blade housing suits both data centre and branch office deployments where dependable cellular backup is critical. Contact iptrading.com.au — your local source for enterprise-grade networking solutions. -
Vendor:OPENGEAR
OPENGEAR 569018 | GPS Active Antenna, 20 dB Gain, Magnetic Base, 6ft SMA
569018
Stock Status: Enquire
Vendor:OPENGEAROPENGEAR 569018 | GPS Active Antenna, 20 dB Gain, Magnetic Base, 6ft SMA
The Opengear 569018 is a GPS active antenna designed for use with all Opengear 4G LTE cellular management units, including the OM1200 and OM2200 series. Delivering a typical 20 dB gain, this antenna amplifies weak satellite signals to ensure reliable GPS signal reception for accurate positioning and precise time synchronisation in enterprise out-of-band management deployments. The compact magnetic base enables tool-free installation on any metallic surface, making it ideal for data centre racks, server cabinets, and network equipment enclosures.
The antenna connects via an RG174 coaxial cable approximately 6 feet (2 metres) in length, terminating in an SMA male connector for straightforward integration with compatible Opengear devices. The flexible cable length allows optimal antenna placement to maximise sky view and signal quality. Order through iptrading.com.au — your local source for enterprise-grade networking solutions. -
Vendor:Juniper
Juniper AP36-WW | Wi-Fi 7 Access Point, 10-Stream MultiGigabit, Bluetooth Low Energy, Internal Antenna
AP36-WW
Stock Status: Enquire
Vendor:JuniperJuniper AP36-WW | Wi-Fi 7 Access Point, 10-Stream MultiGigabit, Bluetooth Low Energy, Internal Antenna
The Juniper AP36-WW is a superior-performance Wi-Fi 7 access point designed for demanding enterprise and outdoor environments. Featuring 10 spatial streams and MultiGigabit connectivity, it delivers exceptional throughput, reduced latency, and improved spectral efficiency over previous Wi-Fi generations. Built-in internal antennas and integrated Bluetooth Low Energy (BLE) support make it a versatile solution for high-density deployments, IoT connectivity, and location services. Built to meet the needs of modern enterprise networks, the AP36-WW supports the latest 802.11be (Wi-Fi 7) standard, enabling higher data rates and more efficient airtime utilisation across congested environments. Its MultiGigabit uplink ensures the backhaul keeps pace with wireless performance, while BLE opens up a range of smart building and asset-tracking use cases. Upgrade your network with gear from iptrading.com.au — Australia's IT hardware specialists. -
Vendor:Cambium Networks
Cambium Networks XV3-8X00A10-RW | XV3-8 Indoor Tri-Radio Wi-Fi 6 Access Point with SDR, 8x8 MIMO, 5GbE Uplink
XV3-8X00A10-RW
Stock Status: Enquire
Vendor:Cambium NetworksCambium Networks XV3-8X00A10-RW | XV3-8 Indoor Tri-Radio Wi-Fi 6 Access Point with SDR, 8x8 MIMO, 5GbE Uplink
The Cambium Networks XV3-8X00A10-RW is a high-performance indoor tri-radio Wi-Fi 6 (802.11ax) access point engineered for demanding enterprise and high-density environments. Featuring Software Defined Radio (SDR) technology with an 8x8 MIMO configuration, this AP delivers exceptional throughput and spectral flexibility across its three radios, while the 5GbE uplink ensures the backhaul can keep pace with aggregate wireless capacity. Designed for regional worldwide (RW) regulatory compliance, it suits Australian enterprise deployments requiring future-ready wireless infrastructure. With SDR-driven adaptability, network administrators gain the ability to dynamically allocate radio resources to meet evolving traffic demands — a significant advantage in lecture theatres, open-plan offices, and large hospitality venues. The 8x8 spatial streams maximise per-client throughput and overall cell capacity, while Wi-Fi 6 features such as OFDMA, MU-MIMO, and Target Wake Time (TWT) improve efficiency and device battery life. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Cambium Networks
Cambium Networks XV2-2X00C00-RW | XV2-2 Indoor Wi-Fi 6 Dual Radio 2x2 Access Point with 2.5GbE Uplink
XV2-2X00C00-RW
In stock
Vendor:Cambium NetworksCambium Networks XV2-2X00C00-RW | XV2-2 Indoor Wi-Fi 6 Dual Radio 2x2 Access Point with 2.5GbE Uplink
The Cambium Networks XV2-2 is an indoor dual-radio Wi-Fi 6 (802.11ax) access point designed to deliver high-performance wireless connectivity in enterprise and commercial environments. Featuring a 2x2 MIMO architecture across both 2.4 GHz and 5 GHz radios, it provides reliable, high-throughput coverage for dense client environments such as offices, schools, and hospitality venues. The 2.5GbE uplink port ensures the backhaul keeps pace with Wi-Fi 6 aggregate speeds, eliminating wired bottlenecks. Built on Cambium's cnMaestro cloud management platform, the XV2-2 simplifies deployment and ongoing network operations with centralised visibility, configuration, and troubleshooting across distributed sites. Its compact, low-profile form factor suits ceiling or wall mounting, and the RW (Rest of World) regulatory domain makes it suitable for Australian deployments. Cambium Networks products purchased through IP Trading come backed by manufacturer warranty and local expert support. Visit iptrading.com.au to secure your order — enterprise-grade hardware with expert support. -
Vendor:Cambium Networks
Cambium Networks XV2-2X00A10-RW | XV2-2 Indoor Wi-Fi 6 Dual Radio 2x2 Access Point with 2.5GbE Uplink
XV2-2X00A10-RW
Stock Status: Enquire
Vendor:Cambium NetworksCambium Networks XV2-2X00A10-RW | XV2-2 Indoor Wi-Fi 6 Dual Radio 2x2 Access Point with 2.5GbE Uplink
The Cambium Networks XV2-2X00A10-RW is an indoor dual-radio Wi-Fi 6 (802.11ax) access point designed to deliver high-performance wireless connectivity in enterprise and commercial environments. Featuring a 2x2 MIMO configuration across both the 2.4 GHz and 5 GHz bands, this AP leverages Wi-Fi 6 technologies including OFDMA and MU-MIMO to maximise throughput and efficiency in high-density deployments such as offices, schools, and healthcare facilities.. The 2.5GbE uplink ensures the backhaul connection keeps pace with Wi-Fi 6 speeds, eliminating wired bottlenecks. iptrading.com.au — your local source for enterprise-grade networking solutions. -
Vendor:Fortinet
Fortinet FANT-04ABGN-2504-O-R | Dual-Band Wi-Fi Omni Micro Antenna 2.4/5GHz, 2.5/4dBi, 4x RP-SMA Connectors
FANT-04ABGN-2504-O-R
Stock Status: Enquire
Vendor:FortinetFortinet FANT-04ABGN-2504-O-R | Dual-Band Wi-Fi Omni Micro Antenna 2.4/5GHz, 2.5/4dBi, 4x RP-SMA Connectors
The Fortinet FANT-04ABGN-2504-O-R is a dual-band omnidirectional micro antenna designed for use with compatible Fortinet wireless access points and routers. Operating across both the 2.4GHz and 5GHz frequency bands, it delivers 2.5dBi gain at 2.4GHz and 4dBi gain at 5GHz, providing reliable 360-degree signal coverage in indoor environments. The four RP-SMA connectors make it straightforward to attach to supported Fortinet devices, helping to extend and improve Wi-Fi coverage without the need for bulky external antennas. Ideal for small offices, branch deployments, or anywhere a compact antenna upgrade is required, this Fortinet accessory ensures your wireless infrastructure performs at its best. It is compatible with Fortinet's range of wireless networking devices that feature RP-SMA antenna ports. Upgrade your network with gear from iptrading.com.au — Australia's IT hardware specialists. -
Vendor:Juniper
Juniper AP36M-WW | Wi-Fi 7 Access Point, 10-Stream MultiGigabit, BLE, External Antenna Connectors
AP36M-WW
Stock Status: Enquire
Vendor:JuniperJuniper AP36M-WW | Wi-Fi 7 Access Point, 10-Stream MultiGigabit, BLE, External Antenna Connectors
The Juniper AP36M-WW is a superior-performance Wi-Fi 7 (802.11be) access point designed for high-density enterprise and campus environments. Featuring 10 spatial streams across multi-gigabit radios, it delivers exceptional throughput, reduced latency, and improved spectral efficiency compared to previous Wi-Fi generations. Bluetooth Low Energy (BLE) support enables location services and IoT use cases, while external antenna connectors provide deployment flexibility for specialised coverage scenarios. Built to integrate seamlessly with Juniper's Mist AI-driven wireless platform, the AP36M-WW benefits from cloud-native management, AI-powered optimisation, and proactive troubleshooting capabilities. It is suited for environments demanding the highest levels of wireless performance, including large offices, lecture theatres, and high-density venues. Buy today from iptrading.com.au — fast shipping and expert service across Australia. -
Vendor:Ubiquiti
Ubiquiti UACC-USL-ANT-HG | SuperLink High-Gain Omnidirectional Antenna, 7 dBi, RP-SMA, IP67-Rated
UACC-USL-ANT-HG
In stock
Vendor:UbiquitiUbiquiti UACC-USL-ANT-HG | SuperLink High-Gain Omnidirectional Antenna, 7 dBi, RP-SMA, IP67-Rated
The Ubiquiti UACC-USL-ANT-HG is a high-gain omnidirectional antenna designed to extend the wireless range of Ubiquiti SuperLink deployments in all directions. Delivering 7 dBi of gain via an RP-SMA connector, it is engineered for reliable, 360-degree signal coverage across demanding environments. The IP67-rated outdoor enclosure ensures full protection against dust ingress and temporary water immersion, making it equally suited to indoor plant floors, warehouses, and exposed outdoor installations where connectivity must be maintained regardless of weather conditions. Built to complement Ubiquiti's SuperLink ecosystem, this antenna is the ideal upgrade for sites requiring extended coverage without sacrificing omnidirectional performance. Its weatherproof construction and straightforward RP-SMA interface allow for quick integration with compatible SuperLink devices, reducing installation complexity for IT teams. Order now at iptrading.com.au — trusted by Australian IT professionals.
Trusted ICT Solutions Backed by 20+ Years of Expertise
At IP Trading, we specialise in delivering high-quality ICT products and solutions tailored to business, government, and enterprise needs. With over two decades of experience, we provide seamless procurement, expert support, and competitive pricing on a vast range of networking, security, server, storage, and power solutions. Our dedicated account managers ensure streamlined interactions with preferred vendors, eliminating time-consuming follow-ups while offering expert advice on project design, sourcing, and implementation.
Why Choose IP Trading?
We are a trusted supplier to Federal, State, and Local Government departments, Not-for-Profit organisations, and businesses of all sizes. Our team of experts in technical sales, logistics, finance, and account management ensures efficiency at every stage—from presales consultation to contract negotiation. As a registered supplier on the Australian Government’s DTA Hardware Marketplace and a prequalified ICT provider for NSW and QLD Government projects, we bring credibility and reliability to every transaction. Partner with IP Trading for flexible, innovative, and cost-effective ICT solutions tailored to your needs.