-
Vendor:Arista
Arista CAB-SFP-SFP-2.5 | 10G SFP+ DAC Cable, Passive Twinax, 2.5M
CAB-SFP-SFP-2.5
Stock Status: Enquire
Vendor:AristaArista CAB-SFP-SFP-2.5 | 10G SFP+ DAC Cable, Passive Twinax, 2.5M
The Arista CAB-SFP-SFP-2.5M is a 10GBASE-CR passive Twinax direct attach copper (DAC) cable delivering 10 Gigabit Ethernet connectivity between SFP+ ports over a 2.5-metre length. Designed for data centre environments, it provides cost-effective, ultra-low-latency short-reach interconnects for top-of-rack switching, HPC clusters, and network storage deployments where optical transceivers are unnecessary.
With a passive copper design drawing just 0.57W per end and full compliance with IEEE 802.3, SFF-8431, and SFP+ MSA standards, this cable integrates seamlessly with Arista EOS and CloudVision across all supported Arista SFP+ and SFP25 platforms. RoHS compliant and hot-swappable for flexible, safe deployment. Available now at iptrading.com.au — competitive prices and local support. -
Vendor:Arista
Arista CAB-SFP-SFP-1M | 10G SFP+ DAC Cable, Passive Twin-ax, 1 Metre
CAB-SFP-SFP-1M
Stock Status: Enquire
Vendor:AristaArista CAB-SFP-SFP-1M | 10G SFP+ DAC Cable, Passive Twin-ax, 1 Metre
The Arista CAB-SFP-SFP-1M is a 10GBASE-CR passive Direct Attach Copper (DAC) cable delivering 10 Gbps connectivity between SFP+ ports at a fraction of the cost of optical transceivers. Designed for data centre rack and adjacent-rack deployments, this 1-metre twin-ax cable eliminates active electronics for ultra-low latency and minimal power draw under 0.5W. It integrates natively with Arista EOS and CloudVision for true plug-and-play operation with no optic qualification cycles required.
Compliant with IEEE 802.3 and SFP+ MSA standards (SFF-8431/SFF-8432), the CAB-SFP-SFP-1M supports 10G Ethernet, 8G Fibre Channel, and 10G FCoE applications. Its hot-pluggable SFP+ form factor on both ends ensures straightforward deployment across Arista switches and compatible third-party infrastructure. RoHS compliant and fully backed by Arista's hardware warranty and support services. Order direct from iptrading.com.au — Australian-owned and operated since 2001. -
Vendor:Arista
Arista CAB-SFP-SFP-1.5 | 10G SFP+ DAC Cable, Passive Twinax, 1.5m
CAB-SFP-SFP-1.5
Stock Status: Enquire
Vendor:AristaArista CAB-SFP-SFP-1.5 | 10G SFP+ DAC Cable, Passive Twinax, 1.5m
The Arista CAB-SFP-SFP-1.5M is a 10GBASE-CR passive direct attach copper (DAC) Twinax SFP+ cable delivering 10 Gbps connectivity over a 1.5-metre length. Designed for high-density, low-latency short-reach interconnects in data centre environments, this passive copper cable eliminates the power overhead of active optics while maintaining full compliance with IEEE 802.3 and MSA standards. Its pre-terminated SFP+ connectors at both ends provide plug-and-play deployment with zero optics qualification cycles required.
Fully integrated with Arista EOS and CloudVision across all supported EOS releases, this DAC cable is hot-swappable and certified on all Arista switching platforms. It is ideal for rack-to-rack and top-of-rack switch interconnects in data centres and high-performance computing environments. In stock and ready to ship from iptrading.com.au — order now for fast dispatch. -
Vendor:Arista
Arista CAB-SFP-SFP-0.5 | 10G SFP+ DAC Cable, Passive Twinax, 0.5m, 10GBASE-CR
CAB-SFP-SFP-0.5
Stock Status: Enquire
Vendor:AristaArista CAB-SFP-SFP-0.5 | 10G SFP+ DAC Cable, Passive Twinax, 0.5m, 10GBASE-CR
The Arista CAB-SFP-SFP-0.5M is a 0.5-metre passive Twinax Direct Attach Copper (DAC) cable delivering 10GBASE-CR connectivity for short-reach data centre interconnects. Designed for top-of-rack and in-rack server-to-switch cabling, this SFP+ to SFP+ cable operates at 10 Gbps with just 0.1W power consumption — making it an efficient, cost-effective alternative to optical transceivers in high-density environments. It is hot-swappable, RoHS compliant, and fully certified across all Arista platforms.
Compliant with SFP+ MSA industry standards and supported across all Arista EOS releases without minimum version requirements, this cable integrates seamlessly with Arista CloudVision for plug-and-play deployment. It also supports 8G Fibre Channel and FCoE applications alongside standard 10 Gigabit Ethernet. Order now at iptrading.com.au — trusted by Australian IT professionals. -
Vendor:Arista
Arista CAB-S-S-25G-5M | 25G SFP28 Twinax DAC Cable, Passive Copper, 5 Metre
CAB-S-S-25G-5M
Stock Status: Enquire
Vendor:AristaArista CAB-S-S-25G-5M | 25G SFP28 Twinax DAC Cable, Passive Copper, 5 Metre
The Arista CAB-S-S-25G-5M is a 25GBASE-CR passive direct attach copper (DAC) cable delivering 25 Gbps connectivity between SFP28 ports over a 5-metre twinax copper run. Designed for data centre rack-to-rack and top-of-rack interconnects, it offers ultra-low latency and minimal power draw — making it the preferred choice over optical transceivers for short-reach high-density deployments in HPC and enterprise switching environments.
The passive copper design eliminates active components, reducing both cost and power consumption (max 0.57W per end at 3.3V). Hot-pluggable SFP28 connectors comply with SFF-8402 and SFF-8432 MSA standards, and the cable is backward compatible with 10G SFP+ ports to support phased network migrations. EEPROM on each connector enables automatic host system identification on Arista EOS-based switches. RoHS compliant and IEEE 802.3by certified. In stock and ready to ship from iptrading.com.au — order now for fast dispatch. -
Vendor:Arista
Arista CAB-S-S-25G-3M | 25G SFP28 Twinax DAC Cable, 3m, 25GBASE-CR Passive
CAB-S-S-25G-3M
Stock Status: Enquire
Vendor:AristaArista CAB-S-S-25G-3M | 25G SFP28 Twinax DAC Cable, 3m, 25GBASE-CR Passive
The Arista CAB-S-S-25G-3M is a 25GBASE-CR passive direct attach copper (DAC) cable with SFP28 connectors on both ends, delivering up to 25 Gbps over a 3-metre reach. Designed for intra-rack and adjacent-rack connectivity in data centre environments, this passive twinax cable consumes minimal power (max 0.57W per end) and requires no active electronics — making it a cost-effective, low-latency solution for switch-to-switch and switch-to-server interconnects. Dual-rate support at 10G or 25G provides deployment flexibility across mixed-speed infrastructures including NAS, SAN, and HPC environments.
Compliant with IEEE P802.3by and SFP28 MSA standards (SFF-8402, SFF-8432, SFF-8431), the CAB-S-S-25G-3M integrates seamlessly with Arista EOS and CloudVision, eliminating third-party qualification cycles and ensuring full vendor support. EEPROM-encoded connectors allow host systems to read cable identity and diagnostics automatically. Available as part of the CAB-S-S-25G-xM family in 1m, 2m, 3m, and 5m variants. Upgrade your network with gear from iptrading.com.au — Australia's IT hardware specialists. -
Vendor:Arista
Arista CAB-S-S-25G-2M | 25G SFP28 DAC Twinax Cable, Passive, 2m, 10G/25G Dual-Rate
CAB-S-S-25G-2M
Stock Status: Enquire
Vendor:AristaArista CAB-S-S-25G-2M | 25G SFP28 DAC Twinax Cable, Passive, 2m, 10G/25G Dual-Rate
The Arista CAB-S-S-25G-2M is a 25GBASE-CR passive SFP28 to SFP28 direct attach copper (DAC) twinax cable delivering 25Gbps connectivity over a 2-metre reach. Designed for high-density data centre deployments, it provides cost-effective, low-latency intra-rack and rack-to-rack interconnects for Arista EOS-based switches and routers. Dual-rate 10G/25G support ensures compatibility across mixed-generation infrastructure, while the passive copper design eliminates active components for reduced power consumption and simplified operation.
Compliant with IEEE 802.3by and SFP28 MSA standards, this cable integrates seamlessly with Arista CloudVision and EOS management frameworks — removing the need for third-party qualification cycles. The 30AWG twinax construction with a 21.25mm minimum bend radius suits dense cabling environments including NAS, SAN, and high-performance computing deployments. Order now at iptrading.com.au — trusted by Australian IT professionals. -
Vendor:Arista
Arista CAB-S-S-25G-2.5 | 25G SFP28 Passive Twinax DAC Cable, 2.5M, 25GBASE-CR
CAB-S-S-25G-2.5
Stock Status: Enquire
Vendor:AristaArista CAB-S-S-25G-2.5 | 25G SFP28 Passive Twinax DAC Cable, 2.5M, 25GBASE-CR
The Arista CAB-S-S-25G-2.5 is a 2.5-metre passive 25GBASE-CR SFP28 to SFP28 direct attach copper (DAC) cable engineered for high-density, short-reach data centre connectivity. Delivering 25Gbps per IEEE 802.3by with backward-compatible 10G dual-rate support, it is the cost-effective choice for top-of-rack, inter-rack, and server-to-switch cabling where optical transceivers are unnecessary. The passive twinax design eliminates active components, reducing power draw to just 0.57W per end and minimising latency.
Compatible beyond standard 25G SFP ports, this cable also operates in 50G SFP and 100G SFP-DD/DSFP interfaces, providing flexibility across Arista's data centre switching portfolio. The hot-pluggable SFP28 connectors are MSA compliant with EEPROM for automatic host identification. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Arista
Arista CAB-S-S-25G-1M | 25G SFP28 DAC Twinax Cable, 1M, Passive, 25GBASE-CR
CAB-S-S-25G-1M
Stock Status: Enquire
Vendor:AristaArista CAB-S-S-25G-1M | 25G SFP28 DAC Twinax Cable, 1M, Passive, 25GBASE-CR
The Arista CAB-S-S-25G-1M is a 25GBASE-CR passive direct attach copper (DAC) twinax cable with SFP28 connectors on both ends, purpose-built for short-reach 25G connectivity within and between adjacent racks in data centre environments. Delivering up to 25 Gbps with dual-rate 10G/25G support, this passive copper design eliminates active components for ultra-low latency and minimal power draw — making it a cost-effective alternative to optical transceivers for intra-rack and top-of-rack deployments in HPC, SAN, and NAS environments.
Compliant with IEEE 802.3by (25GBASE-CR), SFP28 MSA, SFF-8402, and SFF-8432 standards, the cable integrates seamlessly with Arista EOS and CloudVision for plug-and-play deployment without optics qualification cycles. RoHS compliant and operating across 0°C to 70°C, it suits demanding enterprise and data centre installations. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Arista
Arista CAB-S-S-25G-1.5 | 25G SFP28 Passive DAC Twinax Cable, 1.5m, 25GBASE-CR
CAB-S-S-25G-1.5
Stock Status: Enquire
Vendor:AristaArista CAB-S-S-25G-1.5 | 25G SFP28 Passive DAC Twinax Cable, 1.5m, 25GBASE-CR
The Arista CAB-S-S-25G-1.5M is a 1.5-metre passive 25GBASE-CR SFP28 to SFP28 direct attach copper (DAC) twinax cable engineered for high-density data centre short-reach connectivity. Operating at 25.78 Gbps, this passive copper solution delivers ultra-low latency and minimal power draw — making it a cost-effective alternative to optical transceivers for top-of-rack, server-to-switch, and storage interconnect applications. Compliant with IEEE 802.3by and SFP28 MSA standards, it slots seamlessly into Arista 25G-capable switches and NICs.
Dual-rate support extends compatibility to 10G SFP+ ports, protecting your infrastructure investment across mixed-speed environments. EEPROM on each SFP28 connector enables automatic host system identification, and the hot-pluggable design simplifies installation in live environments. RoHS and CE compliant, the cable is also suited to InfiniBand and high-performance computing (HPC) deployments. Order today through iptrading.com.au — your local source for enterprise-grade networking solutions. -
Vendor:Arista
Arista CAB-S-S-25G-0.5 | 25G SFP28 Passive Twinax DAC Cable, 0.5m
CAB-S-S-25G-0.5
Stock Status: Enquire
Vendor:AristaArista CAB-S-S-25G-0.5 | 25G SFP28 Passive Twinax DAC Cable, 0.5m
The Arista CAB-S-S-25G-0.5 is a 0.5-metre passive 25GBASE-CR SFP28 to SFP28 Direct Attach Copper (DAC) Twinax cable engineered for ultra-short-reach, high-density connectivity inside data centre racks. Delivering 25 Gbps with near-zero latency and under 1W total power draw, it is the ideal low-cost, low-power alternative to optical transceivers for top-of-rack switch-to-server and switch-to-storage interconnects. Backward-compatible 10/25G dual-rate operation adds deployment flexibility across mixed-speed Arista environments.
Compliant with IEEE 802.3by (25GBASE-CR) and the SFP28 MSA (SFF-8402), this passive copper cable integrates seamlessly with Arista 25G SFP28 platforms and is RoHS certified for environmentally responsible deployments. Its EEPROM encoding ensures automatic host recognition and plug-and-play simplicity. Well-suited to networking, NAS/SAN storage, and high-performance computing (HPC) applications requiring reliable, high-bandwidth rack-level links. Order now at iptrading.com.au — trusted by Australian IT professionals. -
Vendor:Arista
Arista CAB-Q-S-5M | QSFP+ to 4x SFP+ DAC Breakout Cable, 40G, 5m
CAB-Q-S-5M
Stock Status: Enquire
Vendor:AristaArista CAB-Q-S-5M | QSFP+ to 4x SFP+ DAC Breakout Cable, 40G, 5m
The Arista CAB-Q-S-5M is a 40G QSFP+ to 4x SFP+ passive Direct Attach Copper (DAC) breakout cable designed for cost-effective, short-range interconnects in data centres and enterprise networks. This 5-metre Twinax cable splits a single 40GbE QSFP+ port into four independent 10GbE SFP+ lanes, enabling flexible connectivity between 40G switches and 10G servers, host adapters, or ToR switches without the cost overhead of optical transceivers.
Compliant with SFF-8436, SFF-8431, QSFP+ MSA, and IEEE 802.3 standards, the CAB-Q-S-5M delivers low latency and low power consumption with no additional power required. It is compatible with Arista switches and a wide range of third-party 40G/10G-capable switches, routers, and servers. Buy today from iptrading.com.au — fast shipping and expert service across Australia. -
Vendor:Arista
Arista CAB-Q-S-3M | QSFP+ to 4x SFP+ DAC Breakout Cable, 40G, 3m
CAB-Q-S-3M
Stock Status: Enquire
Vendor:AristaArista CAB-Q-S-3M | QSFP+ to 4x SFP+ DAC Breakout Cable, 40G, 3m
The CAB-Q-S-3M is a 40GbE QSFP+ to 4x SFP+ passive DAC breakout cable that splits a single 40G port into four independent 10GbE SFP+ connections — a cost-effective solution for high-density data centre interconnects at short range. Delivering 40 Gbps aggregate bandwidth across four 10.3125 Gbps channels, this passive twinax copper cable requires no active components, consuming virtually zero power while maintaining low insertion loss and minimal cross-talk for reliable signal integrity.
Compatible with Arista EOS-based switches and multi-vendor SFP+/QSFP+ infrastructure, the CAB-Q-S-3M supports 40GbE, QDR InfiniBand, SAS, and Fibre Channel protocols. Its robust zinc die-cast connectors with pull-to-release latching make it ideal for top-of-rack and adjacent-rack deployments. Need it fast? iptrading.com.au delivers across Australia — shop now. -
Vendor:Arista
Arista CAB-Q-S-2M | 40G QSFP+ to 4x SFP+ DAC Breakout Cable, 2M Passive
CAB-Q-S-2M
Stock Status: Enquire
Vendor:AristaArista CAB-Q-S-2M | 40G QSFP+ to 4x SFP+ DAC Breakout Cable, 2M Passive
The Arista CAB-Q-S-2M is a 40GBase-CU passive copper twinax DAC breakout cable designed for high-density, short-reach data centre interconnects. It splits a single 40G QSFP+ port into four independent 10G SFP+ connections, enabling cost-effective fan-out cabling between spine and leaf switches or servers without the latency or power overhead of active optical components. At just 0.5W with no active circuitry required, it is an ideal choice for rack-level aggregation in modern data centre deployments.
Compliant with QSFP+ MSA SFF-8436 and SFP+ MSA SFF-8431 industry standards, the CAB-Q-S-2M is hot-pluggable and RoHS certified. It is compatible with Arista switches and host bus adapters supporting 40G QSFP+ and 10G SFP+ interfaces, making it straightforward to integrate into existing Arista infrastructure. Visit iptrading.com.au — your local source for enterprise-grade networking solutions. -
Vendor:Arista
Arista CAB-Q-S-1M | 40G QSFP+ to 4x 10G SFP+ DAC Breakout Cable, 1m
CAB-Q-S-1M
Stock Status: Enquire
Vendor:AristaArista CAB-Q-S-1M | 40G QSFP+ to 4x 10G SFP+ DAC Breakout Cable, 1m
The Arista CAB-Q-S-1M is a 40G QSFP+ to 4x 10G SFP+ passive Direct Attach Copper (DAC) breakout cable designed for high-density data centre deployments. Using Twinax copper construction, this 1-metre cable splits a single 40GbE QSFP+ port into four independent 10GbE SFP+ connections, delivering a cost-effective, low-latency alternative to optical transceivers for short-reach breakout applications. Its passive design means zero active electronics, minimal power draw, and no additional configuration overhead.
Fully compliant with SFP+ and QSFP+ MSA standards, the CAB-Q-S-1M integrates seamlessly with Arista EOS and CloudVision for plug-and-play deployment in Arista switching environments. The cable also supports QDR InfiniBand, SAS, and Fibre Channel, making it suitable for HPC and storage interconnects beyond standard Ethernet. Backed by Arista TAC support and a 1-Year Limited Hardware Warranty. Available now at iptrading.com.au — competitive prices and local support. -
Vendor:Arista
Arista CAB-Q-S-0.5 | 40G QSFP+ to 4x SFP+ Breakout DAC Cable, 0.5m
CAB-Q-S-0.5
Stock Status: Enquire
Vendor:AristaArista CAB-Q-S-0.5 | 40G QSFP+ to 4x SFP+ Breakout DAC Cable, 0.5m
The Arista CAB-Q-S-0.5M is a passive 40G QSFP+ to 4x 10GbE SFP+ breakout direct attach cable (DAC), purpose-built for high-density data centre interconnects where a single 40G QSFP+ port needs to fan out to four independent 10G SFP+ connections. At just 0.5 metres, this Twinax copper cable is ideal for top-of-rack (ToR) deployments, adjacent rack cabling, and 40G-to-10G breakout scenarios — delivering ultra-low latency with zero additional power draw thanks to its passive copper construction.
Compliant with QSFP+ MSA, SFF-8436, and SFF-8431 standards, this pre-terminated, hot-pluggable cable requires no transceivers and eliminates optical conversion overhead. It supports 40GBase-CU4 and InfiniBand QDR applications, making it a versatile and cost-effective solution for dense switch-to-server cabling. Visit iptrading.com.au to secure your order — enterprise-grade hardware with expert support.
Trusted ICT Solutions Backed by 20+ Years of Expertise
At IP Trading, we specialise in delivering high-quality ICT products and solutions tailored to business, government, and enterprise needs. With over two decades of experience, we provide seamless procurement, expert support, and competitive pricing on a vast range of networking, security, server, storage, and power solutions. Our dedicated account managers ensure streamlined interactions with preferred vendors, eliminating time-consuming follow-ups while offering expert advice on project design, sourcing, and implementation.
Why Choose IP Trading?
We are a trusted supplier to Federal, State, and Local Government departments, Not-for-Profit organisations, and businesses of all sizes. Our team of experts in technical sales, logistics, finance, and account management ensures efficiency at every stage—from presales consultation to contract negotiation. As a registered supplier on the Australian Government’s DTA Hardware Marketplace and a prequalified ICT provider for NSW and QLD Government projects, we bring credibility and reliability to every transaction. Partner with IP Trading for flexible, innovative, and cost-effective ICT solutions tailored to your needs.