-
Vendor:Arista
Arista CAB-Q-2Q-100G-5M | 100G QSFP to 2x50G QSFP Twinax DAC Breakout Cable, 5M
CAB-Q-2Q-100G-5M
Stock Status: Enquire
Vendor:AristaArista CAB-Q-2Q-100G-5M | 100G QSFP to 2x50G QSFP Twinax DAC Breakout Cable, 5M
The Arista CAB-Q-2Q-100G-5M is a 100GBASE-CR4 to 2x50GBASE-CR2 passive Twinax DAC breakout cable designed for high-density data centre interconnects. This 5-metre cable splits a single 100G QSFP28 port into two independent 50G QSFP28 connections, making it ideal for top-of-rack and intra-rack deployments where port density and cost efficiency are priorities. The passive copper construction eliminates active components, delivering ultra-low power consumption and reliable short-reach connectivity.
Compatible with most Arista EOS-based switches running software version 4.22.1 or later, this cable integrates seamlessly into Arista's broad high-density optics and cabling ecosystem. It conforms to the QSFP MSA open standard and supports hot-swap for maximum uptime. Available in 1M, 2M, 3M, and 5M lengths to suit varying rack configurations. In stock and ready to ship from iptrading.com.au — order now for fast dispatch. -
Vendor:Arista
Arista CAB-Q-2Q-100G-3M | 100G QSFP to 2x 50G QSFP Breakout DAC Cable, 3M
CAB-Q-2Q-100G-3M
Stock Status: Enquire
Vendor:AristaArista CAB-Q-2Q-100G-3M | 100G QSFP to 2x 50G QSFP Breakout DAC Cable, 3M
The Arista CAB-Q-2Q-100G-3M is a 3-metre passive Twinax Direct Attach Copper (DAC) breakout cable designed for high-density data centre and HPC interconnects. It splits a single 100GBASE-CR4 QSFP28 port into two independent 50GBASE-CR2 QSFP28 connections, enabling flexible port utilisation without the cost or power overhead of active optical components. With no active electronics and full hot-swap support, it is an ideal low-latency, low-power solution for short-reach top-of-rack and inter-switch cabling.
Fully certified and supported across all Arista switching platforms, this cable integrates seamlessly with Arista EOS and CloudVision for plug-and-play deployment. It is part of Arista's comprehensive optics and cabling portfolio spanning 1G to 400G, simplifying procurement for large-scale network builds. Available in 1M, 2M, 3M, and 5M lengths to suit varied rack layouts. Source it today at iptrading.com.au — your local source for enterprise-grade networking solutions. -
Vendor:Arista
Arista CAB-Q-2Q-100G-2M | 100G to 2x 50G QSFP Breakout DAC Twinax Cable, 2M
CAB-Q-2Q-100G-2M
Stock Status: Enquire
Vendor:AristaArista CAB-Q-2Q-100G-2M | 100G to 2x 50G QSFP Breakout DAC Twinax Cable, 2M
The Arista CAB-Q-2Q-100G-2M is a 2-metre passive Direct Attach Copper (DAC) breakout cable that splits a single 100GBASE-CR4 QSFP port into two independent 50GBASE-CR2 QSFP connections. Designed for high-density data centre and HPC environments, it delivers a cost-effective, low-power alternative to optical transceivers with zero active components and minimal latency overhead. Full native integration with Arista EOS (minimum version 4.22.1) and CloudVision ensures plug-and-play deployment without third-party qualification cycles.
As part of Arista's broad 1G–800G copper connectivity portfolio, this cable is hot-swappable and compliant with IEEE 802.3 open standards, making it compatible across Arista's data centre switching platforms. Backed by Arista TAC support and a 1-Year Limited Hardware Warranty, with optional Next Business Day and 4-Hour Advance Hardware Replacement available. Order direct from iptrading.com.au — Australian-owned and operated since 2001. -
Vendor:Arista
Arista CAB-Q-2Q-100G-1M | 100G QSFP to 2x 50G QSFP Breakout DAC Twinax Cable, 1M
CAB-Q-2Q-100G-1M
Stock Status: Enquire
Vendor:AristaArista CAB-Q-2Q-100G-1M | 100G QSFP to 2x 50G QSFP Breakout DAC Twinax Cable, 1M
The Arista CAB-Q-2Q-100G-1M is a 1-metre 100GBASE-CR4 to 2x 50GBASE-CR2 breakout Direct Attach Copper (DAC) twinax cable, purpose-built for high-density data centre interconnects. It splits a single 100G QSFP28 port into two independent 50G QSFP connections, enabling cost-effective server and switch-to-switch cabling without optical transceivers. The passive copper design delivers ultra-low power consumption and minimal latency, making it ideal for top-of-rack and leaf-spine deployments in modern 100G data centres.
Compatible with most Arista switches and supported from EOS version 4.22.1 onwards, this cable complies with MSA open standards for broad interoperability. It is part of Arista's extensive optics and cable portfolio spanning 1G to 400GE. Additional lengths — 2M, 3M, and 5M — are available in the same family for flexible cabling layouts. In stock and ready to ship from iptrading.com.au — order now for fast dispatch. -
Vendor:Arista
Arista CAB-O-O-400G-3M | 400G OSFP DAC Cable, 400GBASE-CR8, Passive Twinax, 3m
CAB-O-O-400G-3M
Stock Status: Enquire
Vendor:AristaArista CAB-O-O-400G-3M | 400G OSFP DAC Cable, 400GBASE-CR8, Passive Twinax, 3m
The Arista CAB-O-O-400G-3M is a passive 400GBASE-CR8 Direct Attach Copper (DAC) cable delivering 400 Gbps connectivity between OSFP-equipped switches and servers in data centre environments. Utilising 8 x 50Gbps PAM-4 electrical lanes across a 3-metre passive twinax copper link, it provides near-zero latency and ultra-low power consumption — making it the preferred choice for high-density rack-to-rack and top-of-rack interconnects where cost efficiency and performance are critical.
Compatible with Arista EOS 4.23.0 and later, this cable integrates seamlessly into Arista's 400G switching portfolio and supports both point-to-point and breakout configurations on compatible platforms. With hot-swap capability and IEEE 802.3cd compliance, it delivers the reliability and simplicity that enterprise and hyperscale data centre teams demand. Upgrade your network with gear from iptrading.com.au — Australia's IT hardware specialists. -
Vendor:Arista
Arista CAB-O-O-400G-2M | 400G OSFP DAC Cable, 400GBASE-CR8, 8x50G PAM-4, 2m
CAB-O-O-400G-2M
Stock Status: Enquire
Vendor:AristaArista CAB-O-O-400G-2M | 400G OSFP DAC Cable, 400GBASE-CR8, 8x50G PAM-4, 2m
The Arista CAB-O-O-400G-2M is a 400GBASE-CR8 passive Direct Attach Copper (DAC) twinax cable delivering 400Gbps between OSFP ports over a 2-metre length. Designed for high-density data centre and HPC interconnects, it uses 8 lanes of 50Gbps PAM-4 signalling to achieve full 400G throughput with no active components — minimising power consumption and eliminating optics qualification cycles. Fully compliant with IEEE 802.3cd and natively integrated with Arista EOS (4.23.0+) and CloudVision for plug-and-play deployment.
With hot-swappable OSFP connectors on both ends and CMIS management interface compliance, this cable suits top-of-rack and spine-leaf 400G fabric builds where short-reach copper is preferred over optical. It is backed by Arista's hardware warranty and support ecosystem, and is available alongside 1m and 3m variants for flexible cabling layouts. Available now at iptrading.com.au — competitive prices and local support. -
Vendor:Arista
Arista CAB-O-O-400G-1M | 400G OSFP DAC Twinax Cable, 8x 50G PAM-4, 1 Metre
CAB-O-O-400G-1M
Stock Status: Enquire
Vendor:AristaArista CAB-O-O-400G-1M | 400G OSFP DAC Twinax Cable, 8x 50G PAM-4, 1 Metre
The Arista CAB-O-O-400G-1M is a 400GBASE-CR8 passive Direct Attach Copper (DAC) Twinax cable delivering full 400 Gbps connectivity between OSFP-equipped ports over a 1-metre run. Designed for high-density data centre rack and top-of-rack interconnects, it uses 8 x 50G PAM-4 electrical lanes to achieve maximum throughput with near-zero latency — no active components, no optical transceivers, no complexity. It is OSFP MSA compliant, hot-swappable, and optimised for deployment in Arista 400G switching and routing platforms.
This passive copper cable consumes significantly less power than active optical alternatives, making it the preferred choice for short-reach data centre connections where cost efficiency and density matter. Fully compliant with IEEE 802.3cd (400GBASE-CR8), the CAB-O-O-400G-1M integrates seamlessly into Arista spine-leaf architectures and high-performance compute fabrics. In stock and ready to ship from iptrading.com.au — order now for fast dispatch. -
Vendor:Arista
Arista CAB-O-8S-400G-3M | 400G OSFP to 8x 50G SFP28 Breakout Twinax DAC, 3m
CAB-O-8S-400G-3M
Stock Status: Enquire
Vendor:AristaArista CAB-O-8S-400G-3M | 400G OSFP to 8x 50G SFP28 Breakout Twinax DAC, 3m
The Arista CAB-O-8S-400G-3M is a 400GBASE-CR8 passive Direct Attach Copper (DAC) breakout cable designed to connect a single 400G OSFP port to eight 50GBASE-CR SFP28 ports, making it ideal for high-density spine-to-leaf and data centre interconnect deployments. At 3 metres, this twinax copper cable delivers low-latency, power-efficient connectivity without requiring optical transceivers, reducing both cost and complexity in hyperscale and enterprise data centre environments.
Fully compatible with Arista 7800, 7500R, 7300X, and 7050X series platforms supporting OSFP 400G interfaces, this cable enables flexible breakout configurations for bandwidth-intensive workloads. As a passive copper assembly, it consumes no additional power and requires no firmware configuration. Visit iptrading.com.au to secure your order — enterprise-grade hardware with expert support. -
Vendor:Arista
Arista CAB-O-8S-400G-2M | 400G OSFP to 8x 50G SFP DAC Breakout Cable, 2m
CAB-O-8S-400G-2M
Stock Status: Enquire
Vendor:AristaArista CAB-O-8S-400G-2M | 400G OSFP to 8x 50G SFP DAC Breakout Cable, 2m
The Arista CAB-O-8S-400G-2M is a 400GBASE-CR8 passive Direct Attach Copper (DAC) breakout cable that fans out a single OSFP 400G port into eight independent 50GBASE-CR SFP connections across a 2-metre twinax copper assembly. Engineered for high-density data centre and HPC environments, it delivers the full 400 Gbps aggregate bandwidth across 8 x 50G PAM-4 electrical lanes — all without active components, keeping power consumption and latency to a minimum.
Fully integrated with Arista EOS (minimum version 4.23.0) and CloudVision for plug-and-play deployment, this cable eliminates optics qualification cycles and is backed entirely by Arista support. Compatible with OSFP-equipped Arista switch platforms, it is ideal for server-to-switch and leaf-spine interconnects within short rack distances. Also available in 1 m and 3 m variants. Visit iptrading.com.au to secure your order — enterprise-grade hardware with expert support. -
Vendor:Arista
Arista CAB-O-8S-400G-1M | 400G OSFP to 8x 50G SFP DAC Breakout Cable, 1M
CAB-O-8S-400G-1M
Stock Status: Enquire
Vendor:AristaArista CAB-O-8S-400G-1M | 400G OSFP to 8x 50G SFP DAC Breakout Cable, 1M
The Arista CAB-O-8S-400G-1M is a 400GBASE-CR8 passive Twinax Direct Attach Copper (DAC) breakout cable designed for high-density data centre and hyperscale leaf-spine deployments. It fans a single OSFP-DD 400G port out to eight independent 50GBASE-CR SFP ports across 8 x 50G PAM-4 electrical lanes, delivering full 400G aggregate throughput at 1 metre reach. With no active components, power consumption is minimal and installation is plug-and-play — making it the ideal solution for short-reach breakout connectivity in HPC, hyperscale, and enterprise core environments.
Fully supported by Arista EOS (minimum version 4.23.0) and CloudVision, the CAB-O-8S-400G-1M eliminates optics qualification cycles and is backed by Arista TAC for peace of mind. It is compatible with Arista 400G OSFP platforms including the 7368X4, 7060X4, and 7050X4 series, and is available in 1M, 2M, and 3M lengths within the CAB-O-8S-400G-xM family. Upgrade your network with gear from iptrading.com.au — Australia's IT hardware specialists. -
Vendor:Arista
Arista CAB-O-8S-200G-3M | 200G OSFP to 8x 25G SFP28 DAC Breakout Cable, 3m
CAB-O-8S-200G-3M
Stock Status: Enquire
Vendor:AristaArista CAB-O-8S-200G-3M | 200G OSFP to 8x 25G SFP28 DAC Breakout Cable, 3m
The Arista CAB-O-8S-200G-3M is a 200GBASE-CR8 passive twinax copper DAC breakout cable designed for high-density data centre deployments. It connects a single OSFP port — operating at 200G across 8 x 25G NRZ electrical lanes — to eight 25GBASE-CR SFP28 ports over a 3-metre reach. This plug-and-play solution eliminates optics qualification cycles and delivers ultra-low power consumption with no active components, making it ideal for spine-to-server and top-of-rack connectivity in Arista-powered environments.
Fully integrated with Arista EOS and CloudVision, the CAB-O-8S-200G-3M supports interoperability with legacy 100G QSFP and 25G SFP infrastructure, enabling flexible migration paths without a full infrastructure overhaul. The EEPROM is pre-programmed to signal 25G NRZ format and maximum data rate for seamless compatibility with connected NICs and switches. Backed by Arista's 1-Year Limited Hardware Warranty with optional Next Business Day and 4-Hour Advance Hardware Replacement support. Need it fast? iptrading.com.au delivers across Australia — shop now. -
Vendor:Arista
Arista CAB-O-8S-200G-2M | 200G OSFP to 8x 25G SFP28 Breakout Twinax Cable, 2m
CAB-O-8S-200G-2M
Stock Status: Enquire
Vendor:AristaArista CAB-O-8S-200G-2M | 200G OSFP to 8x 25G SFP28 Breakout Twinax Cable, 2m
The Arista CAB-O-8S-200G-2M is a 200GBASE-CR8 passive direct-attach copper (DAC) breakout cable designed for high-density data centre interconnects. It features a single OSFP connector on one end breaking out to eight SFP28 25GBASE-CR connectors on the other, enabling cost-effective 200G-to-8x25G fan-out connections between spine and leaf switches. At 2 metres, it is ideal for top-of-rack and intra-rack cabling scenarios where low latency and zero power consumption of passive copper are priorities.
This cable is fully compatible with Arista 7000-Series and other platforms supporting OSFP 200G interfaces and standard SFP28 25G ports. It eliminates the need for separate transceivers, reducing cost and complexity in large-scale deployments. Order direct from iptrading.com.au — Australian-owned and operated since 2001. -
Vendor:Arista
Arista CAB-O-8S-200G-1M | 200G OSFP to 8x 25G SFP28 DAC Breakout Cable, 1m
CAB-O-8S-200G-1M
Stock Status: Enquire
Vendor:AristaArista CAB-O-8S-200G-1M | 200G OSFP to 8x 25G SFP28 DAC Breakout Cable, 1m
The Arista CAB-O-8S-200G-1M is a 200GBASE-CR8 passive Direct Attach Copper (DAC) breakout cable delivering a 1-metre, high-density interconnect solution for data centre and HPC environments. With an OSFP connector on one end and 8 x 25GBASE-CR SFP28 connectors on the other, it enables 200G OSFP-equipped Arista switches to directly connect to servers or NICs with 25G SFP ports — eliminating the need for active optics or separate transceivers. The passive twinax design minimises power consumption and cost while delivering 200Gbps aggregate throughput across 8 x 25G NRZ electrical lanes.
Supported from Arista EOS 4.23.0 onwards, this cable integrates seamlessly into Arista's ecosystem including CloudVision management. Each SFP28 connector is factory-programmed with an EEPROM identifying the 25G NRZ signal format, ensuring compatibility with legacy 100G QSFP and 25G SFP infrastructure. Available in 1m, 2m, and 3m variants within the CAB-O-8S-200G series, it is ideal for rack-level and adjacent-rack breakout deployments. Order now at iptrading.com.au — trusted by Australian IT professionals. -
Vendor:Arista
Arista CAB-O-4Q-400G-3M | 400G OSFP to 4x 100G QSFP Breakout DAC Cable, 3m
CAB-O-4Q-400G-3M
Stock Status: Enquire
Vendor:AristaArista CAB-O-4Q-400G-3M | 400G OSFP to 4x 100G QSFP Breakout DAC Cable, 3m
This 400G to 4x100G breakout Direct Attach Copper (DAC) cable delivers high-density, low-latency fan-out connectivity in data centre environments. Featuring a passive twinax copper design with an OSFP connector on one end and four 100GBASE-CR2 QSFP connectors on the other, it enables a single 400G switch port to serve four independent 100G devices — ideal for top-of-rack and spine-to-leaf interconnects where port density and power efficiency are critical. Operating across 8 x 50G PAM-4 electrical lanes, it requires no active components and draws minimal power.
Compatible with Arista EOS 4.23.0 and later, this cable integrates seamlessly into Arista data centre switching platforms. Its hot-swappable design minimises downtime during installation or servicing, and MSA compliance ensures interoperability across standards-based environments. In stock and ready to ship from iptrading.com.au — order now for fast dispatch. -
Vendor:Arista
Arista CAB-O-4Q-400G-2M | 400G OSFP to 4x 100G QSFP Breakout DAC Cable, 2m
CAB-O-4Q-400G-2M
Stock Status: Enquire
Vendor:AristaArista CAB-O-4Q-400G-2M | 400G OSFP to 4x 100G QSFP Breakout DAC Cable, 2m
The Arista CAB-O-4Q-400G-2M is a passive 400GBASE-CR8 Twinax Direct Attach Copper (DAC) breakout cable engineered for high-density, low-latency data centre interconnects. It splits a single 400G OSFP port into four independent 100GBASE-CR2 QSFP connections over a 2-metre length — making it an ideal solution for spine-to-leaf breakout cabling, top-of-rack deployments, and 400G migration scenarios where existing 100G infrastructure must be preserved.
Built on passive Twinax copper technology, this cable delivers ultra-low power consumption and minimal latency without the complexity of active optics. It is MSA compliant, hot-swappable, and fully supported on Arista EOS platforms from version 4.23.0 onwards. Part of Arista's extensive 400G connectivity portfolio — available in 1m, 2m, and 3m lengths — this cable suits Australian enterprises scaling their data centre fabric with confidence. Upgrade your network with gear from iptrading.com.au — Australia's IT hardware specialists. -
Vendor:Arista
Arista CAB-O-4Q-400G-1M | 400G OSFP to 4x 100G QSFP Breakout DAC Cable, 1m
CAB-O-4Q-400G-1M
Stock Status: Enquire
Vendor:AristaArista CAB-O-4Q-400G-1M | 400G OSFP to 4x 100G QSFP Breakout DAC Cable, 1m
The Arista CAB-O-4Q-400G-1M is a passive Twinax copper breakout DAC cable designed for high-density data centre interconnects, splitting a single 400GBASE-CR8 OSFP port into four independent 100GBASE-CR2 QSFP connections over a 1-metre run. Its passive copper design delivers near-zero latency and minimal power consumption, making it ideal for rack-to-rack and top-of-rack switch connectivity in modern 400G data centre deployments.
Compatible with Arista EOS-based switches running EOS 4.23.0 or later, this cable supports hot-swappable OSFP and QSFP transceivers for maximum uptime and ease of servicing. It complies with industry MSA and IEEE open standards and forms part of Arista's comprehensive 400GE cable ecosystem, available in 1m, 2m, and 3m lengths. Order today from iptrading.com.au — your local source for enterprise-grade networking solutions.
Trusted ICT Solutions Backed by 20+ Years of Expertise
At IP Trading, we specialise in delivering high-quality ICT products and solutions tailored to business, government, and enterprise needs. With over two decades of experience, we provide seamless procurement, expert support, and competitive pricing on a vast range of networking, security, server, storage, and power solutions. Our dedicated account managers ensure streamlined interactions with preferred vendors, eliminating time-consuming follow-ups while offering expert advice on project design, sourcing, and implementation.
Why Choose IP Trading?
We are a trusted supplier to Federal, State, and Local Government departments, Not-for-Profit organisations, and businesses of all sizes. Our team of experts in technical sales, logistics, finance, and account management ensures efficiency at every stage—from presales consultation to contract negotiation. As a registered supplier on the Australian Government’s DTA Hardware Marketplace and a prequalified ICT provider for NSW and QLD Government projects, we bring credibility and reliability to every transaction. Partner with IP Trading for flexible, innovative, and cost-effective ICT solutions tailored to your needs.