• Black teltonika rutc42 dual-modem lte cat 4 industrial router with gold connectors and white labeling shown from back
1 1

Teltonika

Teltonika RUTC42000400 | RUTC42 Dual-Modem LTE Cat 4 Industrial Router, Wi-Fi 6, 5x GbE

Teltonika RUTC42000400 | RUTC42 Dual-Modem LTE Cat 4 Industrial Router, Wi-Fi 6, 5x GbE

RUTC42000400

In stock:19

$882.97 AUD
$882.97 AUD
$882.97 AUD
Sale Stock Status: Enquire
Taxes included. Shipping calculated at checkout.

Description

The Teltonika RUTC42 is a dual-modem LTE Cat 4 industrial edge router purpose-built for mission-critical connectivity in IoT, SCADA, and edge computing deployments. Equipped with two independent cellular modules — each supporting LTE Cat 4 at up to 150 Mbps downlink, physical Nano SIM, and eSIM — it delivers seamless failover and load balancing to eliminate single points of cellular failure. Wi-Fi 6 dual-band (802.11ax), five Gigabit Ethernet ports, a dual-core ARM Cortex-A53 CPU, 1 GB RAM, and 8 GB flash make it one of the most capable industrial routers in its class. DIN rail mounting and a -40°C to +40°C operating range ensure reliable deployment in harsh industrial environments.

Running Teltonika's RutOS, the RUTC42 supports native Docker containers for localised edge application processing, plus Modbus, MQTT, MultiWAN failover, and full VPN capability for secure remote and SCADA access. Integration with Teltonika RMS provides real-time network visibility, remote configuration, and advanced data collection across distributed sites. Buy today from iptrading.com.au — fast shipping and expert service across Australia.

Features

- Dual independent LTE Cat 4 modems for seamless failover and load balancing across two cellular connections
- Per-modem SIM switching — automatic failover between physical SIM and eSIM based on signal quality, data limits, roaming status, or network fault
- Native Docker container support for localised edge application processing on-device
- RutOS operating system with Modbus, MQTT, and industrial protocol support
- Teltonika RMS integration — real-time network map, secure remote configuration, and advanced data collection
- MultiWAN failover — automatic backup of primary WAN connection on failure
- VPN support for secure remote access and SCADA connectivity
- Wi-Fi 6 (802.11ax) dual-band with MU-MIMO for high-efficiency wireless client support
- DIN rail form factor for industrial panel and cabinet installations
- IEC 62368-1:2018 safety certified for industrial deployments

Warranty

Teltonika networking products come with a 24-month warranty from the date of purchase. Batteries are covered under a separate 6-month warranty.
https://teltonika-networks.com/support/warranty-repair

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Technical Specifications

FAQs

Technical Specifications

- 2x LTE Cat 4 modems — 150 Mbps downlink / 50 Mbps uplink per modem
- 3G: up to 21 Mbps downlink / 5.76 Mbps uplink per modem
- 2G: up to 236.8 kbps per modem
- 2x eSIM (consumer type) — up to 7 eSIM profiles per modem
- 2x Physical Nano SIM slots (one per modem)
- 5x Gigabit Ethernet ports
- Wi-Fi 6 dual-band (802.11ax) with MU-MIMO
- CPU: Dual-Core ARM Cortex-A53 @ 1.3 GHz
- RAM: 1 GB
- Flash storage: 8 GB
- DIN rail mountable form factor
- Operating temperature: -40°C to +40°C
- PSU included
- Safety certification: IEC 62368-1:2018
- Part number: RUTC42000400

FAQs

Q: What makes the RUTC42 different from a single-modem cellular router?
A: The RUTC42 has two fully independent LTE Cat 4 modems, each with its own SIM slot and eSIM. This means if one cellular connection fails — due to signal loss, data limit, roaming restrictions, or network fault — the router automatically fails over to the second modem without dropping connectivity. It can also load-balance across both modems simultaneously for increased throughput.

Q: Can I use different SIM cards or carriers on each modem?
A: Yes. Each modem has its own physical Nano SIM slot and supports up to 7 eSIM profiles, allowing you to assign different carriers to each modem. This is ideal for carrier redundancy, roaming cost management, or using a local SIM alongside a corporate SIM.

Q: Does the RUTC42 support edge computing or IoT application hosting?
A: Yes. The RUTC42 natively supports Docker containers via RutOS, enabling you to run localised edge applications, data processing, or IoT logic directly on the router without relying on cloud connectivity. Combined with Modbus and MQTT protocol support, it is well suited to industrial IoT and SCADA environments.

Q: How is the RUTC42 managed remotely?
A: The RUTC42 integrates with Teltonika RMS (Remote Management System), which provides a real-time network map, secure remote configuration, firmware updates, and advanced data collection across all deployed devices. VPN support adds an additional layer of secure remote access.

Q: Is the RUTC42 suitable for outdoor or harsh industrial environments?
A: The RUTC42 is designed for industrial environments, with an operating temperature range of -40°C to +40°C and DIN rail mounting for panel or cabinet installation. It is IEC 62368-1:2018 safety certified. For outdoor deployments, verify enclosure requirements for your specific site conditions.

Q: Can I purchase the Teltonika RUTC42 in Australia from IP Trading?
A: Yes. IP Trading (iptrading.com.au) stocks the RUTC42 and ships across Australia with expert pre- and post-sales support. Contact our team for volume pricing, compatibility advice, or deployment guidance.

Recently Viewed

  • Request for a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us