• Silver SFP-10G-T-X-BCC copper transceiver with gold connector
1 1

Blue Cable Co

SFP-10G-T-Dell-BCC | Dell Compatible 10GB Ethernet RJ45 30m (10GBASE-T)

SFP-10G-T-Dell-BCC | Dell Compatible 10GB Ethernet RJ45 30m (10GBASE-T)

SFP-10G-T-Dell-BCC

In stock:48

$272.80 AUD
$272.80 AUD
$272.80 AUD
Sale Stock Status: Enquire
Taxes included. Shipping calculated at checkout.

Description

The SFP-10G-T-Dell-BCC is a drop-in compatible replacement for the Dell SFP-10G-T. This SFP+ transceiver provides plug-and-play 10 Gigabit Ethernet connectivity over copper infrastructure using a standard RJ-45 connector, supporting Dell networking platforms that require 10GBASE-T interfaces. - IEEE 802.3an 10GBASE-T compliance ensures interoperability with standards-based 10 Gigabit Ethernet copper ports - SFP+ form factor with RJ-45 connector, 10 Gbps data rate, up to 30 metres reach over Category 6a or Category 7 cable - Hot-pluggable design allows installation and removal without powering down the host device - Enhanced digital diagnostics monitoring (DDM) interface provides real-time access to operating parameters including temperature, voltage, and link diagnostics - Also compatible with Dell part numbers 407-BCWZ and 407-BDDF - SFF-8431 and SFF-8432 MSA compliant for broad platform compatibility

Features

• IEEE 802.3an compliance guarantees full-duplex 10 Gigabit Ethernet operation over twisted-pair copper, enabling direct connection to server NICs, storage arrays, and switch uplinks with embedded 10GBASE-T ports
• Auto-negotiation with 10GBASE-T PHYs allows the transceiver to establish link parameters automatically, simplifying deployment in mixed-rate environments
• Enhanced DDM provides cable monitoring and link diagnostic capabilities beyond basic temperature and voltage telemetry, aiding troubleshooting in dense rack environments
• Hot-pluggable SFP+ interface supports insertion and removal during operation without disrupting adjacent ports or requiring chassis power cycling
• Power consumption optimised for 10GBASE-T over copper at 30 metre distances, suitable for intra-rack and short inter-rack connections where fibre is unnecessary
• SFF-8431 and SFF-8432 MSA compliance ensures mechanical and electrical compatibility across SFP+ slots from multiple vendors sharing the same form factor specification

Warranty

5-Year Advanced Warranty on All Blue Cable Co® Products

Blue Cable Co® offers a comprehensive 5-Year Advanced Warranty on all our branded products. Our advanced warranty ensures fast, hassle-free replacements to keep your network running smoothly. If a fault occurs, we"ll deliver a replacement part before you return the faulty item,minimising downtime and giving you complete peace of mind.

Choose Blue Cable Co® for reliable, high-quality network components backed by industry-leading warranty support.

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Technical Specifications

FAQs

Compatible SFP Selector

Technical Specifications

Brand: Blue Cable Co
BCC SKU: SFP-10G-T-Dell-BCC
Compatible Replacement For: SFP-10G-T-Dell (also 407-BCWZ, 407-BDDF)
Compatibility: Dell compatible
Lab Testing: Tested in Sydney, Australia
Warranty: 5-year advanced hardware replacement (Blue Cable Co)
Form Factor: SFP+
Data Rate: 10 Gbps
Connector Type: RJ-45
Cable Type: Category 6a / Category 7 copper
Max Reach: Up to 30m
Standards: IEEE 802.3an (10GBASE-T), IEEE 802.3az, SFF-8431, SFF-8432 MSA
DDM Support: Yes (enhanced digital diagnostics)
Operating Temperature: Commercial (0°C to 70°C)

FAQs

Q: Will this work in place of the Dell SFP-10G-T?
A: Yes. This transceiver is a drop-in replacement for Dell SFP-10G-T (also marketed as 407-BCWZ and 407-BDDF). It meets the 10GBASE-T standard (IEEE 802.3an), uses the SFP+ form factor, and delivers 10 Gbps over copper via RJ-45, providing plug-and-play compatibility with Dell networking equipment that specifies these part numbers.

Q: Which Dell platforms support this transceiver?
A: This transceiver works in Dell networking switches, routers, and servers with SFP+ slots that support 10GBASE-T copper modules. Compatibility is determined by the presence of an SFP+ interface and platform support for IEEE 802.3an signalling over RJ-45. Consult your Dell hardware documentation to confirm 10GBASE-T copper transceiver support for your specific model.

Q: What cable category is required for the full 30 metre reach?
A: Category 6a or Category 7 cable is required to achieve 10 Gbps data rates at distances up to 30 metres. Category 6 cable may support 10GBASE-T at reduced distances, but is not recommended for this transceiver's rated reach. Proper cable installation with attention to bend radius and termination quality is essential for reliable 10 Gigabit performance.

Q: Does this transceiver support multi-rate operation below 10 Gbps?
A: This transceiver is designed for 10GBASE-T operation at 10 Gbps as specified by IEEE 802.3an. Some 10GBASE-T PHYs include auto-negotiation support for 1000BASE-T and intermediate rates, but multi-rate behaviour depends on the specific chipset implementation. Verify multi-rate requirements with the host platform specifications if backward compatibility below 10 Gbps is needed.

Q: Can I use this transceiver for connections longer than 30 metres?
A: The maximum specified reach is 30 metres over Category 6a or Category 7 cable. Exceeding this distance risks signal degradation, increased bit error rates, and link instability due to attenuation and crosstalk in copper twisted-pair media. For distances beyond 30 metres, consider a fibre-based 10 Gigabit transceiver (such as 10GBASE-SR or 10GBASE-LR) appropriate to your reach requirement.

Compatible SFP Selector

Need a Compatible SFP or QSFP Transceiver?

Use the Blue Cable Co Compatible SFP Selector to quickly filter by vendor compatibility, speed, form factor, fibre type, distance and connector and only see options that exist in our range.
Fully tested. No brand-tax. Sydney re-coding available if required.

Find Compatible Transceivers

100% Compatible With Equipment From Major Vendors

Coded & tested in our state of the art lab in Sydney

Silver-colored sfp-10g-sr-bcc transceiver module with a white label featuring blue and black text, designed for 850nm wavelength optical communication.
Blue Cable Co®
Cisco

  • Request for a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us