• Juniper Compatible QSFP-100G-DR-BCC 100GBASE-DR silver transceiver module
1 1

Blue Cable Co

QSFP-100G-DR-BCC | Juniper Compatible 100G Single-Mode 500m (100GBASE-DR)

QSFP-100G-DR-BCC | Juniper Compatible 100G Single-Mode 500m (100GBASE-DR)

QSFP-100G-DR-BCC

Stock Status: Enquire

$962.50 AUD
$962.50 AUD
$962.50 AUD
Sale Stock Status: Enquire
Taxes included. Shipping calculated at checkout.

Description

The QSFP-100G-DR-BCC is a drop-in compatible replacement for the Juniper QSFP-100G-DR. This transceiver provides plug-and-play 100G connectivity in Juniper switches and routers with QSFP28 ports supporting 100GBASE-DR applications. - IEEE 802.3cd 100GBASE-DR compliance ensures interoperability with any standards-compliant 100G DR port - QSFP28 form factor, 100G data rate over single-mode fibre, 1310nm wavelength, up to 500m reach via duplex LC connector - Single lambda PAM4 modulation with onboard gearbox converting 4x25G NRZ electrical signals to 1x100G PAM4 optical signal - Digital diagnostic monitoring (DOM) support for real-time access to optical power, temperature, bias current, and voltage parameters - Media-side RS-FEC (544,514) enabled for reliable PAM4 transmission, host-side CAUI-4 electrical interface - Operating temperature range 0 to 70°C, maximum power consumption 4.5W, hot-swappable design

Features

• IEEE 802.3cd 100GBASE-DR compliance guarantees interoperability with any vendor's 100G DR port implementing the same standard, including breakout compatibility with 400GBASE-DR4 ports
• PAM4 modulation at 53.125 GBd on a single wavelength simplifies cabling to two fibres instead of eight required by parallel optics like SR4 or PSM4, reducing fibre count and patch panel density
• Onboard DSP-based gearbox with integrated retimer and FEC block converts 4x25G NRZ host signals to 1x100G PAM4 optical signal, ensuring signal integrity at extended reach
• Media-side RS (544,514) FEC corrects pre-FEC bit error ratios and is required for reliable PAM4 operation; host-side CAUI-4 interface operates without FEC
• EML transmitter with cooled laser and PIN photodiode receiver deliver 3 dB minimum link budget, sufficient for 500m over standard G.652 single-mode fibre under typical attenuation conditions
• Hot-swappable QSFP28 MSA form factor with duplex LC/UPC connectors supports field replacement without powering down the host platform
• DOM via I2C interface provides real-time monitoring of transmit/receive optical power, module temperature, laser bias current, and supply voltage for proactive link health management

Warranty

5-Year Advanced Warranty on All Blue Cable Co® Products

Blue Cable Co® offers a comprehensive 5-Year Advanced Warranty on all our branded products. Our advanced warranty ensures fast, hassle-free replacements to keep your network running smoothly. If a fault occurs, we'll deliver a replacement part before you return the faulty itemminimising downtime and giving you complete peace of mind.

Choose Blue Cable Co® for reliable, high-quality network components backed by industry-leading warranty support.

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Technical Specifications

Alternate Part Codes

FAQs

Compatible SFP Selector

Technical Specifications

Brand: Blue Cable Co
BCC SKU: QSFP-100G-DR-BCC
Compatible Replacement For: QSFP-100G-DR
Compatibility: Juniper compatible
Lab Testing: Tested in Sydney, Australia
Warranty: 5-year advanced hardware replacement (Blue Cable Co)
Form Factor: QSFP28
Data Rate: 100G (103.125 Gbps aggregate)
Wavelength: 1310nm (1304.5-1317.5nm range)
Fibre Type: Single-mode (SMF)
Connector Type: Duplex LC
DOM Support: Yes (DDM)
Standards: IEEE 802.3cd 100GBASE-DR, QSFP28 MSA (SFF-8665, SFF-8636), 100G Lambda MSA, OIF CAUI-4
Max Reach: Up to 500m over OS2 single-mode fibre (subject to fibre quality and link budget)
Electrical Interface: 4x25.78 Gbps NRZ (OIF CEI-28G-VSR)
Optical Interface: 1x53.125 GBd PAM4
FEC: Media-side RS (544,514) FEC enabled, host-side CAUI-4 no FEC
Operating Temperature: 0 to 70°C
Power Consumption: Maximum 4.5W

Alternate Part Codes

740-088322

FAQs

Q: Will this work in place of the Juniper QSFP-100G-DR?
A: Yes. The QSFP-100G-DR-BCC is designed as a direct replacement for the Juniper QSFP-100G-DR. It shares the same QSFP28 form factor, 100GBASE-DR data rate, 1310nm wavelength, and 500m single-mode reach. The transceiver is plug-and-play compatible and complies with IEEE 802.3cd and QSFP28 MSA standards, ensuring it will initialize and operate identically in Juniper platforms that specify the QSFP-100G-DR.

Q: Which Juniper platforms support this transceiver?
A: This transceiver works in Juniper switches and routers with QSFP28 ports supporting 100GBASE-DR, including QFX-Series data centre switches, EX-Series Ethernet switches, MX-Series universal routing platforms, and PTX-Series packet transport routers. Confirm your specific platform supports 100GBASE-DR optics by checking the Juniper Hardware Compatibility Tool or platform documentation for QSFP28 port specifications.

Q: What fibre type and quality is required for 500m reach?
A: This transceiver requires OS2 single-mode fibre (G.652 compliant, 9/125 µm core/cladding). The 500m reach assumes a 3 dB minimum link budget and typical fibre attenuation of approximately 0.35-0.4 dB/km at 1310nm. Actual reach depends on fibre quality, splice/connector losses, and link conditions. Higher-quality fibre or lower insertion loss may extend reach; degraded fibre or multiple splices may reduce it.

Q: Does this transceiver require FEC to be enabled on the host platform?
A: Media-side RS (544,514) FEC is enabled internally within the transceiver to correct errors in the PAM4 optical signal and is always active. The host-side CAUI-4 electrical interface operates without FEC. You do not need to configure FEC on the host platform; the transceiver handles error correction autonomously between the electrical and optical domains.

Q: Can this transceiver interoperate with 400G DR4 ports using breakout cables?
A: Yes. This 100GBASE-DR transceiver can interoperate with a 400GBASE-DR4 QSFP-DD or OSFP port configured for 4x100G breakout, where each of the four 100G lanes uses the same 100GBASE-DR signaling. Use a breakout cable (MPO-12 to 4x duplex LC) to connect one 100G lane from the 400G port to this transceiver. Confirm your host platform supports 400G-to-100G DR breakout mode.

Compatible SFP Selector

Need a Compatible SFP or QSFP Transceiver?

Use the Blue Cable Co Compatible SFP Selector to quickly filter by vendor compatibility, speed, form factor, fibre type, distance and connector and only see options that exist in our range.
Fully tested. No brand-tax. Sydney re-coding available if required.

Find Compatible Transceivers

100% Compatible With Equipment From Major Vendors

Coded & tested in our state of the art lab in Sydney

Silver-colored sfp-10g-sr-bcc transceiver module with a white label featuring blue and black text, designed for 850nm wavelength optical communication.
Blue Cable Co®
Cisco

  • Request for a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us