Skip to product information
1 of 2

Eaton

Eaton Tripp Lite SmartPro SMX700HG | Medical-Grade UPS 230V 700VA 450W | 6 x C13

Eaton Tripp Lite SmartPro SMX700HG | Medical-Grade UPS 230V 700VA 450W | 6 x C13

SKU:SMX700HG

Stock Status: Enquire

Regular price $0.00 AUD
Regular price
$0.00 AUD
$0.00 AUD
Regular price
Sale Stock Status: Enquire
Taxes included. Shipping calculated at checkout.

Description

SMX700HG is a medical-grade, line-interactive UPS designed for 230V environments where low leakage current and isolation are required. It provides battery backup, automatic voltage regulation (AVR) and surge protection for connected equipment in patient-care vicinities (when connected to an appropriate hospital-grade outlet).

  • Capacity: 700VA / 450W
  • Runtime: up to 36 minutes at half load (225W), up to 14.5 minutes at full load (450W)
  • Outlets: 6 x IEC C13 (hospital-grade), battery backup + surge protection on all outlets
  • Input: IEC C14 inlet on short input lead
  • Isolation: built-in isolation transformer with Faraday shield for full isolation and common-mode noise reduction
  • Low leakage: cumulative leakage current less than 100 microamps (connected load dependent)
  • Monitoring: USB and DB9 serial for unattended shutdown with PowerAlert software

Note: No power cord is included. This UPS is intended to remain connected to mains power except during outages. It is not intended for frequent charge/discharge use cases (for example, mobile carts that are often unplugged).

Warranty: 2-year limited warranty.

Features

• Medical-grade UPS for 230V deployments, designed for patient-care vicinity use (when connected appropriately)
• Built-in isolation transformer with Faraday shield for full isolation and common-mode noise reduction
• 700VA / 450W capacity with AVR, corrects 155V to 274V input without battery use
• 6 x hospital-grade IEC C13 outlets, all outlets provide battery backup plus 340J surge protection
• Low leakage current design, less than 100 microamps (cumulative, connected load dependent)
• USB and DB9 monitoring, supports unattended shutdown with PowerAlert software
• Hot-swap battery access door, replacement battery cartridge RBC36SLT

Warranty

2-year limited warranty

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Collapsible content

Technical Specifications

FAQs

Datasheet

Technical Specifications

Part Number: SMX700HG
UPS Type: Line-Interactive (AVR)

Capacity:
- 700VA / 450W

Input:
- Nominal Input Voltage: 230V AC
- Input Connection: IEC C14 inlet
- Rated Input Current (max load): 3.6A
- Recommended Electrical Service: 10A 230V
- Maximum Input Amps: 4A

Output:
- Nominal Output Voltage Supported: 220V / 230V / 240V
- Frequency: 50 / 60 Hz (automatic)
- Output Voltage Regulation (line mode): -18%, +8%
- Output Waveform (battery mode): PWM sine wave
- Outlets: 6 x IEC C13 (hospital-grade)

AVR Operating Range:
- Corrects input voltage from 155V to 274V AC to maintain usable output without using battery power
- Overvoltage correction: 206V to 245V reduced by 9%
- Undervoltage correction: 183V to 199V boosted by 10%
- Severe undervoltage correction: 155V to 182V boosted by 21%

Battery:
- Battery Type: Valve Regulated Lead Acid (VRLA)
- Runtime (full load 450W): 14.5 minutes
- Runtime (half load 225W): 36 minutes
- DC System Voltage: 36V
- Recharge Rate: < 3.6 hours from 10% to 90% (typical, after full load discharge)
- Replacement Battery Cartridge: RBC36SLT
- Battery Access: hot-swap via access door
- Typical Battery Lifespan: 3 to 6 years (usage dependent)

Surge Protection:
- Surge Suppression Rating: 340 joules

Physical:
- Form Factor: Tower
- Dimensions (H x W x D): 325 x 191 x 229 mm
- Unit Weight: 19.10 kg
- Operating Temperature: 0°C to 40°C
- Storage Temperature: -15°C to 50°C

Interfaces:
- USB monitoring port
- DB9 serial port

In the box:
- UPS unit
- USB monitoring cable (1.8 m)
- DB9 serial monitoring cable (1.8 m)
- Owner’s manual
- No power cord included

Warranty:
- 2-year limited warranty

FAQs

Q1: Does the SMX700HG include a power cord?
A1: No. The unit uses an IEC C14 input and no power cord is included.

Q2: What outlets does it provide?
A2: It provides 6 x IEC C13 hospital-grade outlets. All outlets provide battery backup and surge protection.

Q3: What is the runtime?
A3: Up to 36 minutes at half load (225W) and up to 14.5 minutes at full load (450W).

Q4: What makes this model suitable for medical environments?
A4: It is designed for medical-grade applications and includes a built-in isolation transformer with a Faraday shield, plus low leakage current (less than 100 microamps, connected load dependent).

Q5: Can I use this UPS on a mobile cart that is frequently unplugged?
A5: It is intended to remain connected to mains power except during brief outages. Frequent unplug/charge-discharge use (such as many mobile cart scenarios) is not the intended application and can impact battery warranty.

Datasheet

This product has a detailed PDF datasheet available. Open PDF datasheet in a new tab .

Your browser can’t display the embedded PDF. Click here to open it in a new tab.

Recognised by Eaton, two years running

We have been nominated as Eaton Authorised Partner of the Year 2026, our second consecutive year of recognition.

As an authorised Eaton partner in Australia, we supply genuine Eaton UPS systems, rack PDUs and enterprise power protection solutions with expert product advice, fast turnaround, and reliable fulfilment.

Learn more about our nomination.
  • Request for a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  
  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us