1 2

Eaton

Eaton Tripp Lite SmartPro SMX1200XLHGL | Medical-Grade UPS 230V 1kVA 750W | LiFePO4 | 6 x C13 | Full Isolation

Eaton Tripp Lite SmartPro SMX1200XLHGL | Medical-Grade UPS 230V 1kVA 750W | LiFePO4 | 6 x C13 | Full Isolation

SMX1200XLHGL

Stock Status: Enquire

$0.00 AUD
$0.00 AUD
$0.00 AUD
Sale Stock Status: Enquire
Taxes included. Shipping calculated at checkout.

Description

Eaton Tripp Lite SmartPro SMX1200XLHGL is a 230V, medical-grade, line-interactive tower UPS built for patient-care environments. It provides battery backup, automatic voltage regulation (AVR) and full isolation to help protect sensitive medical equipment from blackouts, brownouts and surges.

  • Capacity: 1000VA / 750W
  • Battery: long-life lithium iron phosphate (LiFePO4)
  • Outlets: 6 x IEC C13 hospital-grade outlets (battery backup + surge protection)
  • Full isolation: built-in isolation transformer with Faraday shield helps remove common-mode noise
  • AVR: corrects low and high voltage without draining the battery
  • Monitoring: USB + DB9 serial for monitoring and unattended shutdown via PowerAlert

Designed for quiet clinical areas, the front-panel LEDs and alarm reporting provide clear status for line power, battery operation, overload and fault conditions.

Features

• Medical-grade 230V UPS for hospital and patient-care environments
• 1kVA / 750W line-interactive protection with AVR, stabilises input from 155V to 274V
• LiFePO4 lithium battery, rated 10,000 cycles and up to 30x the cycle life of comparable SLA batteries
• Full isolation via isolation transformer with Faraday shield, helps remove common-mode noise
• 6 x IEC C13 hospital-grade outlets, all provide battery backup plus 340J surge protection
• USB and DB9 serial monitoring, supports unattended shutdown with PowerAlert
• Factory-muted alarm plus front-panel LEDs for status reporting in quiet clinical areas
• Hot-swap battery access door, replacement battery cartridge RBC53L

Warranty

2-year limited warranty

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Technical Specifications

FAQs

Datasheet

Technical Specifications

Part Number: SMX1200XLHGL
UPS Topology: Line-Interactive
Application: Hospital/Medical, approved for use within the Patient Care Vicinity

Capacity:
- 1000VA (1kVA) / 750W (0.75kW)

Input:
- Nominal Input Voltage: 230V AC
- Input Phase: Single-phase
- Rated Input Current (max load): 5A
- Maximum Input Amps: 5A
- Input Connection Type: C14 inlet
- Input Cord Length: 0.2 m
- Recommended Electrical Service: 10A 230V

Output:
- Nominal Output Voltage (supported): 220V / 230V / 240V
- Frequency: 50/60 Hz (automatic selection)
- Output Voltage Regulation (line mode): -18%, +8%
- Output Waveform (battery mode): PWM sine wave
- Outlets: 6 x IEC C13 (hospital-grade)
- Individually Controllable Load Banks: No

Battery:
- Battery Type: Lithium-ion (LiFePO4)
- Runtime (full load 750W): 11 minutes
- Runtime (half load 375W): 27.5 minutes
- Expandable Runtime: No
- DC System Voltage: 36V DC
- Recharge Rate: less than 4.5 hours (10% to 90%)
- Hot-swap Battery: Yes (battery access door)
- Replacement Battery Cartridge: RBC53L
- Typical Battery Lifespan: 3 to 6 years (usage dependent)

Voltage Regulation (AVR):
- Input voltage range: 155V to 274V AC
- Overvoltage correction: 245V to 274V reduced by 9%
- Undervoltage correction: 183V to 199V boosted by 10%
- Severe undervoltage correction: 156V to 182V boosted by 21%

Surge / Noise Suppression:
- EMI/RFI Noise Suppression: Yes
- Surge Suppression Rating: 340 joules
- Surge Response Time: Instantaneous

User Interface / Controls:
- LED Indicators: 5 LEDs (line power, battery power, overload, voltage regulation, battery low/replace)
- Audible Alarm: factory muted for silent operation, can be enabled via PowerAlert
- Switches: 2 front-panel push buttons (system enable, self-test, alarm cancel)

Communications:
- Interfaces: USB, DB9 serial
- Network Management Card: Not supported

Transfer:
- Transfer Time: 2 to 4 ms
- Low Voltage Transfer to Battery: 155V
- High Voltage Transfer to Battery: 274V
- Cold Start: Supported

Physical:
- Form Factor: Tower
- Cooling: rear-exit fan
- Dimensions (W x H x D): 191 x 323 x 231 mm
- Unit Weight: 20.64 kg
- Shipping Weight: 22.14 kg
- Operating Temperature: 0°C to 40°C
- Storage Temperature: -15°C to 50°C
- Housing Material: PVC

Compliance:
- Certifications: UL 60601-1
- Approved to EN60601-1-2:2015 (4th Edition)
- Compliance: RoHS, CE (Europe)

Warranty:
- 2-year limited warranty (international)

In the box:
- UPS (tower)
- USB monitoring cable, 1.8 m
- DB9 serial monitoring cable, 1.8 m
- Owner’s manual

FAQs

Q1: Is the SMX1200XLHGL suitable for medical and patient-care areas?
A1: Yes. It is a medical-grade UPS certified to UL 60601-1 and is approved for use within the Patient Care Vicinity when installed appropriately.

Q2: What outlets does it provide?
A2: It provides 6 x IEC C13 hospital-grade outlets. All outlets provide battery backup and surge protection.

Q3: What runtime should I expect?
A3: Eaton lists 27.5 minutes at half load (375W) and 11 minutes at full load (750W). Runtime varies with load and conditions.

Q4: Can I add external batteries to extend runtime?
A4: No. This model is listed as non-expandable runtime, so it does not support external battery packs for longer runtime.

Q5: How do I monitor it and automate shutdown?
A5: It includes USB and DB9 serial connections (cables included) and supports PowerAlert software for monitoring and unattended shutdown.

Datasheet

This product has a detailed PDF datasheet available. Open PDF datasheet in a new tab .

Your browser can’t display the embedded PDF. Click here to open it in a new tab.

Recognised by Eaton, two years running

We have been nominated as Eaton Authorised Partner of the Year 2026, our second consecutive year of recognition.

As an authorised Eaton partner in Australia, we supply genuine Eaton UPS systems, rack PDUs and enterprise power protection solutions with expert product advice, fast turnaround, and reliable fulfilment.

Learn more about our nomination.

  • Request for a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us