• Ubiquiti UACC-OM-QSFP28-PSM4 silver QSFP28 transceiver with yellow latch
1 1

Ubiquiti

Ubiquiti UACC-OM-QSFP28-PSM4 | OM QSFP28 PSM4 Transceiver, 12 APC, UACC, MPO, 100G SMF 2 km

Ubiquiti UACC-OM-QSFP28-PSM4 | OM QSFP28 PSM4 Transceiver, 12 APC, UACC, MPO, 100G SMF 2 km

UACC-OM-QSFP28-PSM4

In stock:28

$385.83 AUD
$385.83 AUD
$385.83 AUD
Sale Stock Status: Enquire
Taxes included. Shipping calculated at checkout.

Description

High‑performance 100G PSM4 optical module for QSFP28 ports, delivering reliable parallel‑fibre connectivity up to 2 km over single‑mode. MPO‑12 APC interface streamlines high‑density links in data centre and campus backbones. Hot‑swappable for rapid deployment. Designed for Ubiquiti platforms with QSFP28 ports and built to industry‑standard PSM4 (4 x 25G at 1310 nm) operation. Backed by the manufacturer’s limited warranty for peace of mind. Order direct from iptrading.com.au — Australian-owned and operated since 2001.

Features

- 100G throughput over single‑mode for high‑capacity uplinks
- 2 km reach enabling campus and metro edge interconnects
- MPO‑12 APC interface for dense, parallel‑fibre deployments
- Standards‑based PSM4 for broad QSFP28 interoperability
- Hot‑swappable design reduces downtime and speeds rollout

Warranty

Ubiquiti products come with a 1-year limited hardware warranty covering defects in materials and workmanship under normal use.

Extended Warranty Options:
Extended warranty options may be available through IP Trading. Contact our team to discuss coverage tailored to your needs.

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Technical Specifications

FAQs

Technical Specifications

- Form factor: QSFP28
- Data rate: 100 Gbps (4 x 25G lanes)
- Optical type: 100G PSM4
- Fibre type: Single‑mode (OS2)
- Connector: MPO‑12 APC
- Wavelength: 1310 nm lanes (parallel optics)
- Maximum reach: up to 2 km
- Interface: 8‑fibre parallel (4 Tx / 4 Rx) via MPO‑12
- Hot‑swappable in QSFP28 ports
- Designed for Ubiquiti devices with QSFP28 slots

FAQs

Q: What devices is this module compatible with?
A: It is designed for Ubiquiti switches and routers that have QSFP28 ports. It also follows the 100G PSM4 MSA, so it typically works in industry‑standard QSFP28 ports where vendor lock is not enforced.

Q: What fibre and connector do I need?
A: Use single‑mode OS2 trunk cabling terminated with an MPO‑12 APC connector (commonly Type‑B polarity) to match the module’s parallel 4x25G lanes.

Q: How far can the link run?
A: Up to 2 km over single‑mode fibre when installed and cleaned correctly and within optical budget.

Q: Is it hot‑swappable?
A: Yes. The QSFP28 module is hot‑swappable; insert or remove it without powering down the host device.

Q: How does PSM4 differ from CWDM4?
A: PSM4 uses parallel optics over MPO‑12 with four 1310 nm lanes, while CWDM4 uses duplex LC with wavelength multiplexing. PSM4 requires an MPO‑12 trunk; CWDM4 uses LC duplex leads.

Q: Can I purchase this in Australia from IP Trading?
A: Yes. IP Trading supplies Ubiquiti optics Australia‑wide with local support and tax invoices. Contact our team for availability and volume pricing.

Recently Viewed

  • Request for a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us