• Silver-colored arista lpo-800g-dr8 800gbase-dr8 osfp transceiver modules with blue handles and metallic connectors
1 1

Arista

Arista LPO-800G-DR8 | 800GBASE-DR8 OSFP Transceiver, MPO-16, 500m SMF, 9W LPO

Arista LPO-800G-DR8 | 800GBASE-DR8 OSFP Transceiver, MPO-16, 500m SMF, 9W LPO

LPO-800G-DR8

Stock Status: Enquire

$0.00 AUD
$0.00 AUD
$0.00 AUD
Sale Stock Status: Enquire
Taxes included. Shipping calculated at checkout.

Description

The Arista LPO-800G-DR8 is an 800GBASE-DR8 Linear Pluggable Optic (LPO) OSFP transceiver designed for high-density AI and hyperscale data centre spine-leaf deployments. Delivering 800G throughput across 8 x 100Gbps PAM4 lanes over parallel single-mode fibre via an MPO-16 APC connector, it reaches up to 500m at 1310nm — all while consuming just 9W through its linear (non-DSP) data path. That architecture eliminates the DSP retimer found in traditional 800G OSFP modules, slashing power draw by up to 44% and reducing latency compared to conventional alternatives.

The LPO-800G-DR8 is compatible with Arista's OSFP 800G switching platforms, including the 7060X6 Series, and interoperates with any IEEE 802.3-compliant 800GBASE-DR8 module regardless of form factor. It supports breakout configurations to 2x 400GBASE-DR4 or 8x 100GBASE-DR1, enabling flexible network design and doubled bandwidth density versus 400G per-port systems. Requires Arista EOS 4.35.2 or later. Get it now at iptrading.com.au — authentic hardware, reliable service.

Features

- Linear Pluggable Optic (LPO) architecture — no DSP retimer, delivering lower latency and reduced power vs. traditional 800G OSFP modules
- 9W typical power consumption vs. ~16W for DSP-based 800G OSFP — up to 44% power saving per port
- Native 800GBASE-DR8 support over parallel single-mode fibre at 1310nm
- MPO-16 APC connector enables high-density parallel SMF cabling in space-constrained data centres
- IEEE 802.3-compliant — interoperable with 800GBASE-DR8 modules regardless of form factor
- Breakout support: 2x 400GBASE-DR4 or 8x 100GBASE-DR1 for flexible network design
- Compatible with Arista 7060X6 Series OSFP 800G switching platforms
- Doubles bandwidth density over 400G per-port systems — 25.6T/RU vs. 12.8T/RU
- Optimised for AI fabric and hyperscale data centre spine-leaf topologies
- Part of Arista's comprehensive 800G optics ecosystem (OSFP and QSFP-DD variants)

Warranty

Arista hardware products come with a 1-year limited hardware warranty, covering defects in materials and workmanship under normal use.
Extended Warranty Options:
IP Trading offers tailored extended warranty solutions and support packages for Arista products. Contact our team to explore options that align with your organisation's needs.
https://www.arista.com/assets/data/pdf/Warranty.pdf

All technical data should be verified on the manufacturer data sheets.

View full details

specs-tabs

Technical Specifications

FAQs

Datasheet

Technical Specifications

- Form Factor: OSFP (Octal Small Form-factor Pluggable)
- Data Rate: 800G (8 x 100Gbps PAM4 lanes)
- PHY Standard: 800GBASE-DR8
- Electrical Interface: 800GAUI-8 (8 x 100G PAM-4)
- Connector Type: MPO-16 APC
- Fibre Type: Single-Mode Fibre (SMF), ITU-T G.652
- Wavelength: 1310nm
- Maximum Reach: 500m over parallel SMF
- Tx Power: -2.4 to +4.0 dBm per lane
- Rx Power: -5.9 to +4.0 dBm per lane
- Typical Power Consumption: 9W
- Minimum EOS Version: 4.35.2

FAQs

Q: What makes the LPO-800G-DR8 different from a standard DSP-based 800G OSFP transceiver?
A: The LPO-800G-DR8 uses a Linear Pluggable Optic (LPO) architecture that replaces the conventional DSP retimer with a direct linear data path. This reduces power consumption to approximately 9W — compared to around 16W for DSP-based 800G OSFP modules — while also delivering lower latency. The tradeoff is that the host switch must have sufficient signal integrity to support a linear electrical interface.

Q: What fibre and connector type does the LPO-800G-DR8 require?
A: The LPO-800G-DR8 requires an MPO-16 APC connector and ITU-T G.652 compliant single-mode fibre (SMF). It supports parallel SMF cabling with a maximum reach of 500m at 1310nm, making it suitable for intra-data-centre and campus spine connections.

Q: Which Arista switches are compatible with this transceiver?
A: The LPO-800G-DR8 is compatible with Arista OSFP 800G switching platforms, including the 7060X6 Series. It requires Arista EOS version 4.35.2 or later. Always verify platform compatibility with your specific switch model before deployment.

Q: Does the LPO-800G-DR8 support breakout configurations?
A: Yes. The LPO-800G-DR8 supports breakout to 2x 400GBASE-DR4 or 8x 100GBASE-DR1, allowing flexible connectivity options for connecting to lower-speed devices or for staged network upgrades without replacing existing cabling infrastructure.

Q: Is the LPO-800G-DR8 interoperable with third-party 800G transceivers?
A: The LPO-800G-DR8 is designed to interoperate with any IEEE 802.3-compliant 800GBASE-DR8 module regardless of form factor, providing deployment flexibility in mixed-vendor environments. Confirm interoperability with your specific vendor's implementation before deployment.

Q: Can I purchase the Arista LPO-800G-DR8 in Australia through IP Trading?
A: Yes. IP Trading (iptrading.com.au) supplies authentic Arista transceivers including the LPO-800G-DR8 to Australian businesses. Contact us for pricing, availability, and volume purchasing options for your data centre project.

Datasheet

This product has a detailed PDF datasheet available. Open PDF datasheet in a new tab .

Your browser can’t display the embedded PDF. Click here to open it in a new tab.

Recently Viewed

  • Request for a Quote

    Looking for competitive pricing? Submit a request, and our team will provide a tailored quote that fits your needs.

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Call us Now  

  • Contact Us Directly

    Have a question or need immediate assistance? Call us for expert advice and real-time support.

    Contact us