-
Vendor:Cambium Networks
Cambium Networks C000000L123A | M25 Cable Gland, 6-10mm, Weatherproof Outdoor, Pack of 10
C000000L123A
In stock
Vendor:Cambium NetworksCambium Networks C000000L123A | M25 Cable Gland, 6-10mm, Weatherproof Outdoor, Pack of 10
The Cambium Networks M25 cable gland is a weatherproof cable entry fitting designed for secure outdoor radio installations, accommodating cables with a diameter of 6–10mm. Sold in a pack of 10, this M25-threaded gland is compatible with Cambium cnWave 60GHz radios including the V1000, V3000, and V5000, and is ideal for both primary and auxiliary port connections requiring a reliable environmental seal.
Each cnWave radio ships with one cable gland included; this 10-pack is the essential spare for large deployments, replacement installations, or where multiple cable entries are required per unit. Ensure every outdoor cable penetration is properly sealed against moisture and dust. Order today from iptrading.com.au — your local source for enterprise-grade networking solutions. -
Vendor:Cambium Networks
Cambium Networks C000000L114A | DC LPU Kit, Surge Suppressor, 2x 4-Pin Molex DC Power, IP67
C000000L114A
Stock Status: Enquire
Vendor:Cambium NetworksCambium Networks C000000L114A | DC LPU Kit, Surge Suppressor, 2x 4-Pin Molex DC Power, IP67
The Cambium Networks C000000L114A is a DC Lightning Protection Unit (LPU) kit engineered to safeguard the DC power port of PMP 450m 3 GHz Outdoor Units and compatible ODUs against damaging transient surges. Rated at 172A (10/1000µs) line-to-ground surge protection and compliant with EN61000-4-5, the kit ships with two complete LPUs fitted with Molex 4-pin DC connectors plus all grounding cables required for a ready-to-install deployment. IP66/IP67 weatherproofing and a -40°C to +60°C operating range make it suitable for the harshest outdoor environments.
Each unit supports pole mounting on 1–3" (25–75 mm) diameter poles or wall mounting, ensuring flexible field installation. For complete PMP 450m port protection, Cambium recommends pairing this DC LPU kit with the C000065L007B Cat5e Ethernet LPU. Visit iptrading.com.au to secure your order — enterprise-grade hardware with expert support. -
Vendor:Cambium Networks
Cambium Networks AX-XV2BRKT-WW | XV2-2X Wall Mount Bracket, Plastic Only, No Screws or Steel Plate
AX-XV2BRKT-WW
In stock
Vendor:Cambium NetworksCambium Networks AX-XV2BRKT-WW | XV2-2X Wall Mount Bracket, Plastic Only, No Screws or Steel Plate
The Cambium Networks XV2-2X mounting bracket is a plastic wall mount accessory designed specifically for the XV2-2X Wi-Fi 6 indoor access point, enabling clean horizontal wall installation in enterprise and commercial deployments. This spare/replacement bracket is ideal for technicians needing to replace a damaged bracket or stage additional mount points ahead of AP installation.
Supplied as a bracket-only unit with no screws or steel plate included — ensure you have the required hardware on hand before installation. Compatible with XV and XE series access points, this worldwide (WW) variant is region-agnostic and suits Australian deployments. Order today at iptrading.com.au — your local source for enterprise-grade networking solutions. -
Vendor:Cambium Networks
Cambium Networks AX-WALLBRKT-WW | XV/XE Series AP Wall Mount L-Bracket, Horizontal Install
AX-WALLBRKT-WW
In stock
Vendor:Cambium NetworksCambium Networks AX-WALLBRKT-WW | XV/XE Series AP Wall Mount L-Bracket, Horizontal Install
The AX-WALLBRKT-WW is a wall mount L-bracket accessory designed specifically for Cambium Networks XV and XE series indoor access points. It enables horizontal mounting of the AP directly against a wall, giving installers a flexible and secure deployment option beyond standard ceiling mounting. Compatible with the XV2-2, XV2-21X, XV3-8, XE3-4, XE5-8, and X7-35X access point models.
This simple, purpose-built bracket is an essential accessory for enterprise Wi-Fi deployments where ceiling mounting is not practical or preferred. Sold individually (qty 1), it suits both new installations and retrofits across Cambium XV and XE series infrastructure. Order now at iptrading.com.au — trusted by Australian IT professionals. -
Vendor:Cambium Networks
Cambium Networks AX-ETHJMPRA-WW | cnPilot e430W/e430H Short Ethernet Jumper Cable, Cat6 RJ45
AX-ETHJMPRA-WW
Stock Status: Enquire
Vendor:Cambium NetworksCambium Networks AX-ETHJMPRA-WW | cnPilot e430W/e430H Short Ethernet Jumper Cable, Cat6 RJ45
The Cambium Networks cnPilot e430W/e430H Short Ethernet Jumper Cable is a purpose-built flat Cat6 accessory cable designed for wall-plate access point deployments. It connects the pass-through port to the eth1/PoE port on the rear of cnPilot e430W, e430H, and e425H access points, enabling proper unit operation when no second downstream Ethernet device is plugged in. The compact ~50mm flat form factor keeps installations tidy and discreet within wall-plate enclosures.
Compatible across the cnPilot e425H, e430H, and e430W access point family, this jumper is an essential accessory for network installers deploying Cambium wall-plate APs in hotels, student accommodation, healthcare facilities, or any environment where the second port loopback is required. Order direct from iptrading.com.au — Australian-owned and operated since 2001. -
Vendor:Cambium Networks
Cambium Networks AX-48V1ADCA-WW | 48V 1A DC Power Adaptor, 48W, Without Cord, Worldwide
AX-48V1ADCA-WW
Stock Status: Enquire
Vendor:Cambium NetworksCambium Networks AX-48V1ADCA-WW | 48V 1A DC Power Adaptor, 48W, Without Cord, Worldwide
The Cambium Networks 48V 1A DC Power Adaptor is a 48W external power supply designed for Cambium Networks wireless access points and radios that require a 48V DC input. With a worldwide (WW) variant designation, this adaptor ships without a regional AC line cord, giving network engineers and IT procurement teams the flexibility to pair it with the appropriate regional cord for their deployment — ideal for organisations managing diverse or international site rollouts.
This compact desktop-form adaptor delivers a stable 48V DC output at 1A, ensuring reliable power delivery to compatible Cambium Networks devices. It is a genuine Cambium Networks accessory, making it the recommended replacement or additional power supply for existing Cambium wireless infrastructure. Order now at iptrading.com.au — trusted by Australian IT professionals. -
Vendor:Aruba
Aruba R8Q74A | 580 Series Outdoor AP Molex AC Power Connector Kit, M25
R8Q74A
Stock Status: Enquire
Vendor:ArubaAruba R8Q74A | 580 Series Outdoor AP Molex AC Power Connector Kit, M25
The Aruba AP-AC-MLX is an outdoor-rated Molex AC power connector kit designed for field assembly of AC power cables on HPE Aruba 580 Series outdoor access points, including the AP-584, AP-585, and AP-587. Sold separately from the access point, it allows installers to select their own cable length on-site and terminate it with a weatherproof Molex AC connector — ideal for outdoor deployments where pre-terminated cables are impractical.
The kit includes an M25 cable gland with O-ring, gland body, seals, clip, and sealing nut, providing a secure, weatherproof seal rated for harsh outdoor environments. It supports UV-resistant, outdoor-rated three-wire AC cable (18 AWG) with an outer diameter of 6–12mm. Compatible across all regional variants of the Aruba 580 Series. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Aruba
Aruba S1H25A | AP-730 Snap-On Covers, White Non-Glossy, 20-Pack | AP-730-CVR-20
S1H25A
Stock Status: Enquire
Vendor:ArubaAruba S1H25A | AP-730 Snap-On Covers, White Non-Glossy, 20-Pack | AP-730-CVR-20
Keep enterprise wireless deployments looking sharp with this 20-pack of white non-glossy snap-on covers designed specifically for HPE Aruba Networking 730 Series Wi-Fi 7 campus access points. The tool-free snap-on design allows installers to achieve a clean, professional finish across multi-AP rollouts without impacting RF performance or wireless signal quality — ideal for offices, schools, and hospitality environments where aesthetics matter.
Each cover features a matte white finish that blends unobtrusively into ceiling and wall installations, and the bulk 20-pack format makes it the practical choice for large-scale deployments. Compatible exclusively with the Aruba 730 Series access point family, these covers are a simple way to maintain brand standards and installation consistency site-wide. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Aruba
Aruba R4Y93A | 90xx-LTE Outdoor Antenna Extension Kit, 35 ft Cable with Outdoor LTE & GPS Antennas
R4Y93A
Stock Status: Enquire
Vendor:ArubaAruba R4Y93A | 90xx-LTE Outdoor Antenna Extension Kit, 35 ft Cable with Outdoor LTE & GPS Antennas
The HPE Aruba Networking 90xx-LTE Outdoor Extender Kit provides a 35-foot antenna extension solution designed for Aruba 90xx series access points deployed in challenging outdoor environments. The kit includes dedicated outdoor-rated LTE and GPS antennas, enabling reliable cellular connectivity and accurate location services even when the access point must be mounted remotely from the optimal antenna position. Built to withstand outdoor conditions, this kit is ideal for deployments where antenna placement flexibility is critical to achieving strong LTE signal reception and GPS lock. Engineered specifically for Aruba 90xx-LTE series hardware, this extension kit ensures a seamless fit and full compatibility without compromise to signal performance. Whether you are extending coverage across large outdoor areas, industrial sites, or remote installations, this kit gives network administrators the flexibility to position antennas for maximum gain. In stock and ready to ship from iptrading.com.au — order now for fast dispatch. -
Vendor:Cambium Networks
Cambium Networks C050942F051B | ePMP 5 GHz Force 4525L Feedhorn for Force 200 Dish, 8-Pack, Priced per Radio (ROW)
C050942F051B
Stock Status: Enquire
Vendor:Cambium NetworksCambium Networks C050942F051B | ePMP 5 GHz Force 4525L Feedhorn for Force 200 Dish, 8-Pack, Priced per Radio (ROW)
Upgrade ePMP deployments by reusing existing Force 200 reflectors with the Force 4525L 5 GHz feedhorn. This dedicated feed enables a clean, low-touch transition to the latest hardware while keeping capital outlay down and simplifying on-site work. Supplied as an 8‑pack and priced per radio, the ROW variant suits global 5 GHz channel plans and is backed by Cambium’s standard manufacturer warranty. Visit iptrading.com.au to secure your order — enterprise-grade hardware with expert support. -
Vendor:Ubiquiti
Ubiquiti UACC-UK-ULTRA-TS | Swiss Army Knife Ultra Table Stand, Desktop Mount Accessory
UACC-UK-ULTRA-TS
In stock
Vendor:UbiquitiUbiquiti UACC-UK-ULTRA-TS | Swiss Army Knife Ultra Table Stand, Desktop Mount Accessory
Purpose-built for the Swiss Army Knife Ultra, this table stand lets you deploy the device neatly on a desk, shelf or counter without wall or pole mounting.. It delivers a stable, professional presentation for workspaces, demos and temporary setups. Designed by Ubiquiti specifically for the UK-Ultra form factor, the stand keeps the unit upright for optimal placement on flat surfaces and is backed by the manufacturer’s limited warranty.. Order now at iptrading.com.au — trusted by Australian IT professionals. -
Vendor:Ubiquiti
Ubiquiti UACC-U7-PRO-XG-WALL-TS | UniFi U7 Pro XG Wall Table Stand, Desktop Mount for U7 Pro XG Wall AP
UACC-U7-PRO-XG-WALL-TS
In stock
Vendor:UbiquitiUbiquiti UACC-U7-PRO-XG-WALL-TS | UniFi U7 Pro XG Wall Table Stand, Desktop Mount for U7 Pro XG Wall AP
Purpose-built for flexible deployments, this table stand securely holds the UniFi U7 Pro XG Wall access point in an upright position for clean, professional desktop setups. Ideal for labs, demos, hot desks, and spaces where wall mounting isn’t practical. Designed to preserve access to the AP’s ports and airflow, it offers a neat, stable base and a quick way to redeploy without drilling. Backed by Ubiquiti’s standard manufacturer warranty. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Ubiquiti
Ubiquiti UACC-U7-PRO-XG-WALL-COVER | U7 Pro XG Wall Access Point Cover, Paintable Snap-On Faceplate
UACC-U7-PRO-XG-WALL-COVER
In stock
Vendor:UbiquitiUbiquiti UACC-U7-PRO-XG-WALL-COVER | U7 Pro XG Wall Access Point Cover, Paintable Snap-On Faceplate
Give your UniFi U7 Pro XG Wall access point a discreet, design-first look with this paintable snap-on cover.. It’s purpose-built to blend seamlessly into interiors while maintaining access point airflow and wireless performance when finished with non-metallic, water-based paint. Designed for fast, tool-less installation and a clean, professional finish, it’s ideal for customer-facing spaces and premium fit-outs.. Backed by the manufacturer’s limited warranty for peace of mind.. Visit iptrading.com.au to secure your order — enterprise-grade hardware with expert support. -
Vendor:Ubiquiti
Ubiquiti UACC-FM-16CM | Magnetic Wall Mount for UniFi Express, 16 cm Arm
UACC-FM-16CM
In stock
Vendor:UbiquitiUbiquiti UACC-FM-16CM | Magnetic Wall Mount for UniFi Express, 16 cm Arm
Securely mount your UniFi Express with this sleek magnetic wall mount featuring a 16 cm arm for optimal placement and clean installs.. The magnetic interface enables quick attachment and removal for hassle-free maintenance while keeping your device elevated for better airflow and signal positioning.. Designed specifically for UniFi Express, this durable mount supports tidy cable routing and a professional look in home or office deployments. Backed by Ubiquiti’s limited warranty for peace of mind.. Need it fast?. iptrading.com.au delivers across Australia — shop now. Need it fast? iptrading.com.au delivers across Australia — shop now. -
Vendor:Fortinet
Fortinet FANT-MNT-2BRKT | Outdoor Antenna Wall/Pole Mount Kit for Fixed Installs, FEV/FEX/FG/FGR
FANT-MNT-2BRKT
Stock Status: Enquire
Vendor:FortinetFortinet FANT-MNT-2BRKT | Outdoor Antenna Wall/Pole Mount Kit for Fixed Installs, FEV/FEX/FG/FGR
This mounting kit is purpose-built for fixed installations, providing a secure wall or pole mount for Fortinet rugged/outdoor antennas, including models such as the FANT-3IN1-RND-5M.. It’s ideal for deploying cellular-enabled Fortinet solutions across FortiExtender (FEX), FortiExtender Vehicle (FEV), FortiGate (FG) and FortiGate Rugged (FGR) environments. Designed for long-term reliability, the hardware enables clean, stable placement to optimise signal and reduce site maintenance.. Covered by Fortinet’s standard hardware warranty when purchased via authorised channels.. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Aruba
Aruba S6F38A | 760 Solar Cover Kit for Outdoor APs, ACC, AP
S6F38A
Stock Status: Enquire
Vendor:ArubaAruba S6F38A | 760 Solar Cover Kit for Outdoor APs, ACC, AP
Protect outdoor Aruba access points from intense sun exposure with the AP-ACC-760 Solar Cover Kit. This purpose-built sun shield helps manage thermal load in high-UV environments to support stable radio performance and device longevity. Designed for the AP-ACC-760 accessory platform, it installs cleanly with compatible Aruba brackets and hardware. Backed by HPE support and warranty coverage. Buy today from iptrading.com.au — fast shipping and expert service across Australia.
Trusted ICT Solutions Backed by 20+ Years of Expertise
At IP Trading, we specialise in delivering high-quality ICT products and solutions tailored to business, government, and enterprise needs. With over two decades of experience, we provide seamless procurement, expert support, and competitive pricing on a vast range of networking, security, server, storage, and power solutions. Our dedicated account managers ensure streamlined interactions with preferred vendors, eliminating time-consuming follow-ups while offering expert advice on project design, sourcing, and implementation.
Why Choose IP Trading?
We are a trusted supplier to Federal, State, and Local Government departments, Not-for-Profit organisations, and businesses of all sizes. Our team of experts in technical sales, logistics, finance, and account management ensures efficiency at every stage—from presales consultation to contract negotiation. As a registered supplier on the Australian Government’s DTA Hardware Marketplace and a prequalified ICT provider for NSW and QLD Government projects, we bring credibility and reliability to every transaction. Partner with IP Trading for flexible, innovative, and cost-effective ICT solutions tailored to your needs.