-
Vendor:Juniper
Juniper EX-SFP-10GE-DAC-1M | EX-SFP-10GE-DAC Transceiver, 1m, SFP+ 10-Gigabit Ethernet InfiniBand/Fibre Optic Cable
EX-SFP-10GE-DAC-1M
In stock
Vendor:JuniperJuniper EX-SFP-10GE-DAC-1M | EX-SFP-10GE-DAC Transceiver, 1m, SFP+ 10-Gigabit Ethernet InfiniBand/Fibre Optic Cable
The Juniper SFP+ 10-Gigabit Ethernet InfiniBand/Fibre Optic Cable is designed to provide high-speed connectivity for your network infrastructure. With a length of 1 meter, this cable is ideal for short-distance connections in data centers and enterprise environments, ensuring reliable and efficient data transfer. This cable is compatible with a range of Juniper networking equipment, making it a versatile choice for expanding your network capabilities. Upgrade your network with gear from iptrading.com.au Australia's IT hardware specialists. -
Vendor:Juniper
Juniper ORHS-800G-VR8-P | 800G OSFP-RHS VR8 Transceiver, MMF, 50m, Dual MPO-12
ORHS-800G-VR8-P
Stock Status: Enquire
Vendor:JuniperJuniper ORHS-800G-VR8-P | 800G OSFP-RHS VR8 Transceiver, MMF, 50m, Dual MPO-12
The Juniper ORHS-800G-VR8-P is an 800G OSFP Riding Heatsink (OSFP-RHS) optical transceiver designed for ultra-high-density data centre and AI/ML cluster deployments. Operating at 800GBASE-VR8 over multimode fibre (OM4) up to 50 metres, it uses an 8-lane VCSEL-based PAM4 architecture with dual MPO-12 APC connectors, delivering native 800G connectivity alongside flexible breakout modes for 2x400G, 4x200G, and 8x100G configurations. The detached Riding Heatsink design provides enhanced thermal management critical in high-port-density chassis environments.
Qualified for Juniper PTX and QFX 800GbE-capable platforms, this transceiver integrates seamlessly with Junos OS and Junos OS Evolved for full optics recognition and management. It complies with IEEE 802.3 800GBASE-VR8, OSFP MSA, and CMIS 5.3 standards, ensuring broad interoperability. Full JTAC support is available when purchased through authorised Juniper Networks channels. Need it fast? iptrading.com.au delivers across Australia — shop now. -
Vendor:Juniper
Juniper ORHS-800G-FR4 | 800G FR4 OSFP Transceiver, SMF, 2km, Riding Heatsink, LC
ORHS-800G-FR4
Stock Status: Enquire
Vendor:JuniperJuniper ORHS-800G-FR4 | 800G FR4 OSFP Transceiver, SMF, 2km, Riding Heatsink, LC
The Juniper ORHS-800G-FR4 is an 800G OSFP optical transceiver module engineered for hyperscale data centres, AI/ML clusters, and high-performance computing environments demanding maximum port density. Featuring an 800GBASE-FR4 interface over single-mode fibre at up to 2km reach, it uses 8-lane PAM4 modulation and dual duplex LC connectors, delivering 2x400G FR4 breakout capability for flexible spine-leaf and AI fabric deployments. The distinctive riding heatsink design ensures reliable thermal management in air-cooled platforms such as the Juniper QFX5240.
Operating across standard commercial temperatures (0–70°C), this module supports Digital Diagnostics Monitoring (DDM), KP4 Forward Error Correction, and CMIS-compliant firmware upgrades via CDB, giving operations teams full real-time visibility and remote manageability. IEEE 802.3ck compliant and OSFP MSA certified, it integrates cleanly into next-generation 800G switching infrastructure. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Juniper
Juniper ORHS-800G-DR8-2-P | 800G OSFP Transceiver, DR8-2 SMF 2km, Dual MPO-12
ORHS-800G-DR8-2-P
Stock Status: Enquire
Vendor:JuniperJuniper ORHS-800G-DR8-2-P | 800G OSFP Transceiver, DR8-2 SMF 2km, Dual MPO-12
The Juniper ORHS-800G-DR8-2-P is an 800GBASE-DR8-2 OSFP800 optical transceiver with a Riding Heatsink (RHS) form factor, delivering 800 Gbps aggregate throughput over single-mode fibre up to 2km. Designed for high-density data centre and AI/ML cluster deployments, it uses PAM4 modulation across 8 parallel single-wavelength fiber pairs and connects via dual MPO-12/APC receptacles — enabling flexible breakout to 2x400G DR4 or 8x100G DR1 configurations. Qualified for Juniper's PTX and QFX 800GbE-capable product families, this transceiver is purpose-built for next-generation spine and AI fabric interconnects.
The 9.5mm tall Riding Heatsink module integrates seamlessly with Junos OS and Junos OS Evolved for automatic optics recognition and digital diagnostic monitoring via CMIS compliance. Operating across 0°C to 70°C, it supports standard commercial environments and draws approximately 16–18W. Full technical support is backed by the Juniper Networks Technical Assistance Center (JTAC). Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Juniper
Juniper ORHS-800G-DR4-2 | 800G DR4 OSFP RHS Transceiver, 2km SMF, Dual MPO-12
ORHS-800G-DR4-2
Stock Status: Enquire
Vendor:JuniperJuniper ORHS-800G-DR4-2 | 800G DR4 OSFP RHS Transceiver, 2km SMF, Dual MPO-12
The Juniper ORHS-800G-DR4-2 is an 800G OSFP RHS (Riding Heat Sink) optical transceiver engineered for high-density data centre, AI/ML cluster, and core network deployments. Delivering 800G throughput via 2x400G DR4 channels across up to 2km of single-mode fibre, it uses PAM4 modulation with 8x100Gbps lanes over a dual MPO-12 connector interface. Qualified for Juniper's 800GbE-capable PTX and QFX platforms, it integrates natively with Junos OS and Junos OS Evolved for seamless optics management and monitoring.
The RHS form factor — a 9.5mm tall pluggable module with a riding heat sink — is purpose-built for host systems requiring external thermal management and is not interchangeable with standard OSFP-IHS slots. It supports 2x400G DR4 breakout configurations, complies with IEEE 802.3ck, OSFP MSA, and CMIS Rev 5.0 standards, and includes full Digital Diagnostics Monitoring (DDM/DOM). Every module undergoes system-level power, thermal, and DVT validation by Juniper, with full JTAC support included. Available now at iptrading.com.au — competitive prices and local support. -
Vendor:Juniper
Juniper ORHS-2X800G-FR4-P | 1.6T OSFP224 Transceiver, 2x800G FR4, SMF, 2km, Duplex LC
ORHS-2X800G-FR4-P
Stock Status: Enquire
Vendor:JuniperJuniper ORHS-2X800G-FR4-P | 1.6T OSFP224 Transceiver, 2x800G FR4, SMF, 2km, Duplex LC
The Juniper ORHS-2X800G-FR4-P is a 1.6T OSFP224 optical transceiver module designed for high-density AI, HPC, and hyperscale data centre deployments. Delivering 2x800G via 800GBASE-FR4 over single-mode fibre to 2km, it features a Riding Heat Sink (RHS) flat-top form factor for optimised chassis thermal management. Dual duplex LC connectors support flexible cabling configurations, and the module is rated for standard commercial operating temperatures from 0°C to 70°C.
Built on PAM4 modulation across 8x200G electrical lanes, this module supports 2x800G breakout applications and includes Digital Optical Monitoring (DOM) for real-time link diagnostics. It is OSFP MSA-compliant and compatible with Juniper QFX and PTX series platforms featuring OSFP224 slots. Upgrade your network with gear from iptrading.com.au — Australia's IT hardware specialists. -
Vendor:Juniper
Juniper ORHS-1600G-DR8-2-P | OSFP 1.6T DR8 Transceiver, SMF 2km, Dual MPO-12, RHS
ORHS-1600G-DR8-2-P
Stock Status: Enquire
Vendor:JuniperJuniper ORHS-1600G-DR8-2-P | OSFP 1.6T DR8 Transceiver, SMF 2km, Dual MPO-12, RHS
The ORHS-1600G-DR8-2-P is a 1.6 Tbps OSFP optical transceiver module featuring a Riding Heat Sink (RHS) flat-top form factor, purpose-built for liquid-cooled and air-assisted high-density switch platforms. Using DR8 parallel single-mode architecture with 8x 200G PAM4 lanes, it delivers up to 2 km reach over OS2 single-mode fibre via dual MPO-12 connectors — supporting flexible breakout modes of 1x1.6T, 2x800G, 4x400G, or 8x200G for AI fabric, HPC, and next-generation data centre interconnects.
Compliant with the OSFP-XD MSA and managed via CMIS 5.0, this module supports DOM/DDM for real-time diagnostics and operates across a standard commercial temperature range of 0°C to 70°C. It is hot-pluggable and designed to integrate natively into Juniper's high-density platforms. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Juniper
Juniper ORHS-1600G-DR8-2 | OSFP 1.6T DR8 Transceiver, SMF 2km, MPO-16, PAM4
ORHS-1600G-DR8-2
Stock Status: Enquire
Vendor:JuniperJuniper ORHS-1600G-DR8-2 | OSFP 1.6T DR8 Transceiver, SMF 2km, MPO-16, PAM4
The Juniper ORHS-1600G-DR8-2 is a 1.6 Tbps OSFP optical transceiver designed for next-generation AI/ML fabrics, HPC clusters, and hyperscale data centre interconnects. Featuring a Riding Heat Sink (RHS/flat-top) form factor optimised for liquid-cooled or cold-plate switch environments, it uses a DR8 architecture across 8 parallel single-mode fibre lanes with PAM4 modulation at 200 Gbps per lane, delivering 2 km reach over SMF OS2 via an MPO-16 connector at 1310 nm.
This hot-pluggable OSFP module supports Digital Optical Monitoring (DOM/DDM) and CMIS management interface, ensuring full visibility and compatibility within Juniper's 1600G-capable platforms. Compliant with OSFP MSA and IEEE 802.3dj standards, it operates across a standard commercial temperature range of 0°C to 70°C. Available now at iptrading.com.au — competitive prices and local support. -
Vendor:Juniper
Juniper EX-SFP-1GE-T | EX Series 1G Copper SFP Transceiver, RJ-45, 100m
EX-SFP-1GE-T
Stock Status: Enquire
Vendor:JuniperJuniper EX-SFP-1GE-T | EX Series 1G Copper SFP Transceiver, RJ-45, 100m
The Juniper EX Series 1G Copper SFP Transceiver delivers 10/100/1000BASE-T connectivity over standard RJ-45 cabling, providing a flexible and cost-effective alternative to fibre-optic modules. Designed for use with Juniper EX Series switches and routers, it supports auto-negotiation across all three speeds and reaches up to 100 m over Category 5 UTP — making it ideal for enterprise LAN deployments where existing copper infrastructure is already in place.
Compliant with IEEE 802.3i, 802.3u, and 802.3ab standards as well as the SFP Multi-Source Agreement (MSA), this hot-swappable module integrates seamlessly into Juniper EX Series SFP slots without network downtime. Its low power draw and copper media support make it a practical choice for data centre and campus edge connectivity. Order direct from iptrading.com.au — Australian-owned and operated since 2001. -
Vendor:Juniper
Juniper EX-SFP-1GE-LX | EX Series SFP 1000BASE-LX Gigabit Transceiver, 1310nm, 10km Reach, Single-Mode Fibre
EX-SFP-1GE-LX
In stock
Vendor:JuniperJuniper EX-SFP-1GE-LX | EX Series SFP 1000BASE-LX Gigabit Transceiver, 1310nm, 10km Reach, Single-Mode Fibre
The Juniper EX-SFP-1GE-LX is a Small Form-Factor Pluggable (SFP) optic module built to the 1000BASE-LX Gigabit Ethernet standard, delivering reliable 1 GbE connectivity over single-mode fibre (SMF) at a 1310 nm transmit wavelength. With a maximum reach of 10 km, it is well suited to enterprise campus and data centre environments that require long-distance inter-switch or uplink connections across Juniper EX Series infrastructure, including the EX8200 series. The hot-swappable LC duplex interface simplifies installation and maintenance without disrupting network operations. Designed for compatibility across the Juniper EX Series switching platform, the EX-SFP-1GE-LX ensures consistent performance with tested optical power parameters — minimum launch power of -9.5 dBm, maximum launch power of -3 dBm, and receiver sensitivity down to -25 dBm — giving network engineers confidence in link budget planning. Order direct from iptrading.com.au — Australian-owned and operated since 2001. -
Vendor:Juniper
Juniper SFPP-10GE-LRM-IT | SFP+ 10GBase-LRM Transceiver, MMF 220m & SMF 300m, Industrial Temp -40 to 85°C, Duplex LC
SFPP-10GE-LRM-IT
Stock Status: Enquire
Vendor:JuniperJuniper SFPP-10GE-LRM-IT | SFP+ 10GBase-LRM Transceiver, MMF 220m & SMF 300m, Industrial Temp -40 to 85°C, Duplex LC
The Juniper SFPP-10GE-LRM-IT is a 10GBase-LRM SFP+ optical transceiver designed for demanding industrial environments, supporting operation across a wide temperature range of -40°C to +85°C. It delivers 10 Gigabit Ethernet connectivity over both multimode fibre (MMF) up to 220 m and single-mode fibre (SMF) up to 300 m via a duplex LC connector, making it a versatile choice for network upgrades and mixed-fibre plant deployments. Engineered to Juniper Networks specifications, this transceiver is built to maintain reliable performance in harsh conditions where standard commercial-grade optics may fail. Whether deployed in industrial facilities, outdoor cabinets, or temperature-variable data centre environments, the SFPP-10GE-LRM-IT delivers consistent 10G throughput. In stock and ready to ship from iptrading.com.au — order now for fast dispatch. -
Vendor:Juniper
Juniper SFPP-10G-T-IT | SFP+ 10GBASE-T Copper Transceiver, Industrial Temp -40 to 85°C, RJ-45
SFPP-10G-T-IT
Stock Status: Enquire
Vendor:JuniperJuniper SFPP-10G-T-IT | SFP+ 10GBASE-T Copper Transceiver, Industrial Temp -40 to 85°C, RJ-45
The Juniper SFPP-10G-T-IT is an SFP+ 10GBASE-T copper transceiver designed for demanding industrial environments, operating reliably across an extended temperature range of -40°C to +85°C. Featuring a standard RJ-45 connector, it delivers 10 Gigabit Ethernet connectivity over Cat 6A/7 copper cabling, making it an ideal drop-in solution for Juniper switches and routers deployed in harsh or temperature-variable settings such as factory floors, outdoor enclosures, and edge network infrastructure. Built to IEEE 802.3an standards, this transceiver provides a cost-effective way to leverage existing copper cabling infrastructure at 10GbE speeds without sacrificing environmental resilience. Its industrial-grade rating ensures stable performance where commercial-temperature optics would fail, and it is compatible with Juniper EX and QFX series platforms that support SFP+ slots. Buy today from iptrading.com.au — fast shipping and expert service across Australia. -
Vendor:Juniper
Juniper SFP-1FE-LX-IT | 100BASE-LX10 Fast Ethernet SFP Transceiver, SMF 10km, Industrial Temp (-40 to 85°C), Duplex LC
SFP-1FE-LX-IT
Stock Status: Enquire
Vendor:JuniperJuniper SFP-1FE-LX-IT | 100BASE-LX10 Fast Ethernet SFP Transceiver, SMF 10km, Industrial Temp (-40 to 85°C), Duplex LC
The Juniper SFP-1FE-LX-IT is a 100BASE-LX10 Fast Ethernet SFP transceiver designed for Single Mode Fibre deployments requiring extended reach up to 10km over 9/125µm SMF via a Duplex LC connector. Operating at a 1310nm wavelength and conforming to IEEE 802.3ah, this plug-and-play module delivers reliable 100Mbps connectivity on Juniper platforms supporting FE SFP interfaces. Its Industrial Temperature rating (-40°C to 85°C) makes it well suited to demanding environments such as outdoor cabinets, factory floors, and remote edge locations where standard commercial-grade optics would fall short. Part of the Juniper Common Optic series, the SFP-1FE-LX-IT is an ideal choice for network engineers who need hardened, long-reach Fast Ethernet links without compromising platform compatibility. Whether you are extending campus networks, connecting industrial sites, or supporting legacy 100Mbps infrastructure in temperature-extreme conditions, this transceiver provides a dependable, standards-compliant solution. Contact iptrading.com.au — your local source for enterprise-grade networking solutions. -
Vendor:Juniper
Juniper SFP-1FE-FX-IT | 100BASE-FX Fast Ethernet SFP Transceiver, MMF 2km, Industrial Temp, Duplex LC
SFP-1FE-FX-IT
Stock Status: Enquire
Vendor:JuniperJuniper SFP-1FE-FX-IT | 100BASE-FX Fast Ethernet SFP Transceiver, MMF 2km, Industrial Temp, Duplex LC
The Juniper SFP-1FE-FX-IT is a 100BASE-FX Fast Ethernet SFP transceiver designed for multimode fibre deployments requiring reliable performance in harsh environments. Operating across an extended industrial temperature range of -40°C to +85°C, this module delivers 100 Mbps throughput over multimode fibre at distances up to 2km via a duplex LC connector, making it ideal for industrial, outdoor, and mission-critical network edge applications. Compatible with Juniper Networks switches and routers that support SFP form-factor interfaces, this transceiver ensures seamless integration into existing Juniper infrastructure without compromise. Whether you're extending network connectivity in a factory floor, utilities environment, or ruggedised campus deployment, the SFP-1FE-FX-IT is built to endure where commercial-grade optics cannot. Need it fast? iptrading.com.au delivers across Australia — shop now. -
Vendor:Juniper
Juniper OSFP-800G-DR8-LP-P | OSFP 800G DR8 Transceiver, 500m, Dual MPO-12, LPO Standard Compliant
OSFP-800G-DR8-LP-P
Stock Status: Enquire
Vendor:JuniperJuniper OSFP-800G-DR8-LP-P | OSFP 800G DR8 Transceiver, 500m, Dual MPO-12, LPO Standard Compliant
The Juniper OSFP-800G-DR8-LP-P is an 800 Gigabit OSFP form-factor optical transceiver engineered for high-density data centre interconnects. Operating over single-mode fibre with a reach of up to 500 metres via a Dual MPO-12 connector interface, this DR8 module leverages Linear Pre-compensation Optics (LPO) technology to reduce power consumption and signal processing latency — making it well-suited for hyperscale and enterprise core deployments demanding maximum throughput and port density. Compliant with 800G DR8 LPO industry standards, this transceiver is designed to integrate seamlessly into Juniper platforms that support OSFP-800G interfaces, delivering reliable, low-latency optical connectivity at scale. A Juniper manufacturer warranty applies; contact IP Trading for details. Explore this transceiver today at iptrading.com.au — your local source for enterprise-grade networking solutions. -
Vendor:Juniper
Juniper EX-SFP-10GE-SR | EX Series SFP+ 10GbE Short-Range Fibre Transceiver, 850nm MMF, LC Duplex
EX-SFP-10GE-SR
Stock Status: Enquire
Vendor:JuniperJuniper EX-SFP-10GE-SR | EX Series SFP+ 10GbE Short-Range Fibre Transceiver, 850nm MMF, LC Duplex
The Juniper EX-SFP-10GE-SR is a genuine Juniper Networks SFP+ transceiver designed for 10 Gigabit Ethernet connectivity over multimode fibre. Operating at an 850 nm wavelength, it is engineered for short-reach data centre and campus deployments, delivering reliable 10GbE performance across OM3/OM4 multimode fibre infrastructure. Compatible with Juniper EX Series switches, this transceiver supports LC duplex connectors and is hot-pluggable for seamless integration without network downtime. As an authentic Juniper-branded optic, the EX-SFP-10GE-SR ensures full compatibility and interoperability within Juniper EX switching environments, avoiding the risks associated with third-party or uncertified transceivers. It is ideal for high-density rack and server connectivity in enterprise and data centre settings. Get it now at iptrading.com.au — authentic hardware, reliable service.
Trusted ICT Solutions Backed by 20+ Years of Expertise
At IP Trading, we specialise in delivering high-quality ICT products and solutions tailored to business, government, and enterprise needs. With over two decades of experience, we provide seamless procurement, expert support, and competitive pricing on a vast range of networking, security, server, storage, and power solutions. Our dedicated account managers ensure streamlined interactions with preferred vendors, eliminating time-consuming follow-ups while offering expert advice on project design, sourcing, and implementation.
Why Choose IP Trading?
We are a trusted supplier to Federal, State, and Local Government departments, Not-for-Profit organisations, and businesses of all sizes. Our team of experts in technical sales, logistics, finance, and account management ensures efficiency at every stage—from presales consultation to contract negotiation. As a registered supplier on the Australian Government’s DTA Hardware Marketplace and a prequalified ICT provider for NSW and QLD Government projects, we bring credibility and reliability to every transaction. Partner with IP Trading for flexible, innovative, and cost-effective ICT solutions tailored to your needs.