-
Vendor:Check Point
Check Point CPAC-DP-10G-SR-BPM | DP 10G SR Intelligent Bypass Switch Module, Multimode Fibre
CPAC-DP-10G-SR-BPM
Stock Status: Enquire
Vendor:Check PointCheck Point CPAC-DP-10G-SR-BPM | DP 10G SR Intelligent Bypass Switch Module, Multimode Fibre
Maintain traffic continuity on Check Point appliances with this 10GbE SR multimode intelligent bypass module. It provides hardware-level fail-to-wire capability to keep links up during power loss, software faults or maintenance, helping protect uptime in inline deployments. Designed for supported Check Point platforms, this SR (short‑reach) MMF module integrates cleanly into the BPM bay for high-performance 10G connectivity. Backed by Check Point hardware warranty terms when purchased through authorised channels. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Check Point
Check Point CPAC-DP-10G-LR-BPM | Intelligent Bypass Module, 2 x 10GbE LR Single, Mode
CPAC-DP-10G-LR-BPM
Stock Status: Enquire
Vendor:Check PointCheck Point CPAC-DP-10G-LR-BPM | Intelligent Bypass Module, 2 x 10GbE LR Single, Mode
Ensure uninterrupted inline security with Check Point’s intelligent 10GbE LR bypass module. It provides an automatic, fail‑to‑wire path to keep traffic flowing if the host system or power fails, ideal for high-availability deployments on single‑mode fibre links. Featuring dual 10GbE LR optics for long‑reach single‑mode (SMF) connections, it simplifies maintenance windows and reduces downtime risk in critical networks. Backed by Check Point’s hardware warranty and engineering quality. Buy today from iptrading.com.au — fast shipping and expert service across Australia. -
Vendor:Check Point
Check Point CPAC-DP-100SR4-QSFP | DP QSFP28 100GBASE, SR4 Transceiver, MMF MPO, CPAC, 100GbE 70m/100m
CPAC-DP-100SR4-QSFP
Stock Status: Enquire
Vendor:Check PointCheck Point CPAC-DP-100SR4-QSFP | DP QSFP28 100GBASE, SR4 Transceiver, MMF MPO, CPAC, 100GbE 70m/100m
High‑density 100GbE short‑reach optics for Check Point platforms, the CPAC‑DP QSFP28 100GBASE‑SR4 delivers reliable performance over multimode fibre with an MPO‑12 interface. It is ideal for data centre aggregation or spine/leaf uplinks where low latency and simple deployment matter. Supporting up to 70 m on OM3 and 100 m on OM4 at 850 nm, this hot‑swappable module integrates digital diagnostics and low power draw for efficient operations. Covered by manufacturer support as per Check Point terms. Available now at iptrading.com.au — competitive prices and local support. -
Vendor:Check Point
Check Point CPAC-DAC-40G-3M-D | 3m Passive Twinax, CPAC, 40G QSFP+ DAC Cable, 40GbE, DAC
CPAC-DAC-40G-3M-D
Stock Status: Enquire
Vendor:Check PointCheck Point CPAC-DAC-40G-3M-D | 3m Passive Twinax, CPAC, 40G QSFP+ DAC Cable, 40GbE, DAC
A high‑performance 40GbE QSFP+ direct attach copper cable designed for Check Point 9000, 19000 and 29000 appliances. The 3 m passive twinax build delivers ultra‑low latency and reliable in‑rack or adjacent‑rack links at a fraction of the cost of optical transceivers. Factory‑coded for Check Point compatibility and hot‑pluggable QSFP+ ports, it’s ideal for clustering and high‑throughput uplinks in data centre environments. Backed by manufacturer support for peace of mind. Upgrade your network with gear from iptrading.com.au — Australia’s IT hardware specialists. -
Vendor:Check Point
Check Point CPAC-DAC-40G-3M | 3m, QSFP+ Direct Attach Cable, 40GbE
CPAC-DAC-40G-3M
Stock Status: Enquire
Vendor:Check PointCheck Point CPAC-DAC-40G-3M | 3m, QSFP+ Direct Attach Cable, 40GbE
This 40GbE QSFP+ Direct Attach Cable provides a simple, cost‑effective link between QSFP+ ports over a short 3 m reach. It integrates connectors and cable in one assembly for quick, reliable 40G connectivity without separate transceivers. Ideal for top‑of‑rack and short interconnects on Check Point appliances and compatible switches, it reduces power and complexity compared with optical links. Backed by Check Point’s accessory support standards. Buy today from iptrading.com.au — fast shipping and expert service across Australia. -
Vendor:Check Point
Check Point CPAC-DAC-40G-1M | CPAC DAC QSFP+ 40G Direct Attach Cable, 1m Passive
CPAC-DAC-40G-1M
Stock Status: Enquire
Vendor:Check PointCheck Point CPAC-DAC-40G-1M | CPAC DAC QSFP+ 40G Direct Attach Cable, 1m Passive
Enable high-bandwidth interconnects between Check Point appliances and switches with this 40GbE QSFP+ Direct Attach Copper cable. The 1 m passive twinax design delivers ultra-low latency and low power consumption for top‑of‑rack and short‑reach links. Vendor‑coded for reliable operation in Check Point platforms, it provides a simple, cost‑effective alternative to optical transceivers—no separate optics required. Ideal for data centre uplinks, clustering, and high‑throughput security gateways. In stock and ready to ship from iptrading.com.au — order now for fast dispatch. -
Vendor:Check Point
Check Point CPAC-DAC-40/10G-3M | QSFP+ to 4 x SFP+ DAC Breakout Cable 3m, 40GbE to 10GbE
CPAC-DAC-40/10G-3M
Stock Status: Enquire
Vendor:Check PointCheck Point CPAC-DAC-40/10G-3M | QSFP+ to 4 x SFP+ DAC Breakout Cable 3m, 40GbE to 10GbE
Break out one 40GbE QSFP+ port into four independent 10GbE SFP+ links with this passive copper DAC splitter. The integrated connectors remove the need for separate optics, delivering low latency and reliable short‑reach connectivity in racks and top‑of‑rack deployments. Designed for Check Point appliances that support 40G-to-4x10G breakout, the 3 m length keeps cabling neat and costs down while maintaining performance for server, firewall or switch uplinks. Buy today from iptrading.com.au — fast shipping and expert service across Australia. -
Vendor:Check Point
Check Point CPAC-DAC-40/10G-1M | 40/10G Breakout Cable, 1m, QSFP+ to 4 x SFP+, DAC
CPAC-DAC-40/10G-1M
Stock Status: Enquire
Vendor:Check PointCheck Point CPAC-DAC-40/10G-1M | 40/10G Breakout Cable, 1m, QSFP+ to 4 x SFP+, DAC
The CPAC-DAC-40/10G-1M is a 40GbE to four 10GbE direct-attach copper breakout cable, designed to connect a QSFP+ 40G port to four SFP+ 10G ports. Ideal for short in-rack links, it delivers low latency and low power with simple plug-and-play deployment. Backed by Check Point’s manufacturer warranty, this 1m fan-out DAC helps consolidate high-speed uplinks while maximising port utilisation across firewalls, switches, and servers that support 40G-to-4x10G breakout. Upgrade your network with gear from iptrading.com.au — Australia’s IT hardware specialists. -
Vendor:Check Point
Check Point CPAC-DAC-25G-3M-D | 9000/19000/29000 SFP28 DAC Cable, 3m, 25GbE Passive
CPAC-DAC-25G-3M-D
Stock Status: Enquire
Vendor:Check PointCheck Point CPAC-DAC-25G-3M-D | 9000/19000/29000 SFP28 DAC Cable, 3m, 25GbE Passive
A 25GbE SFP28 direct attach copper (DAC) cable designed for short‑reach, high‑performance links on Check Point 9000, 19000 and 29000 appliances. The 3 m passive twinax build delivers ultra‑low latency and simple plug‑and‑play connectivity without separate optics. Built for reliability and neat intra‑ or inter‑rack runs, it’s vendor‑coded for seamless compatibility with supported Check Point SFP28 ports. Covered by Check Point’s standard hardware warranty (region and contract dependent). Available now at iptrading.com.au — competitive prices and local support. -
Vendor:Check Point
Check Point CPAC-DAC-25G-3M | 3m, 25GbE Passive Twinax, SFP28 DAC Cable
CPAC-DAC-25G-3M
Stock Status: Enquire
Vendor:Check PointCheck Point CPAC-DAC-25G-3M | 3m, 25GbE Passive Twinax, SFP28 DAC Cable
The CPAC-DAC-25G-3M is a 3-metre SFP28 direct attach copper cable for 25GbE links, ideal for short-run connections between switches, servers and security gateways. Its passive twinax design delivers ultra-low latency and low power consumption for high-density deployments. Plug-and-play SFP28 ends make installation fast and reliable, providing a cost-effective alternative to optical transceivers for 25GbE within the rack or adjacent racks. Buy today from iptrading.com.au — fast shipping and expert service across Australia. -
Vendor:Check Point
Check Point CPAC-DAC-25G-1M | 25GbE 1m Passive Twinax, SFP28 DAC Cable
CPAC-DAC-25G-1M
Stock Status: Enquire
Vendor:Check PointCheck Point CPAC-DAC-25G-1M | 25GbE 1m Passive Twinax, SFP28 DAC Cable
This 25GbE SFP28 Direct Attach Copper (DAC) cable provides a simple, low‑latency link for short‑distance connections between compatible 25G ports. With SFP28-to-SFP28 terminations and a 1 metre length, it’s ideal for intra-rack or adjacent rack interconnects. Engineered for Check Point appliances and switches with SFP28 25GbE interfaces, this passive twinax cable is plug-and-play and highly power efficient compared to optical transceivers. Backed by the manufacturer’s limited hardware warranty. Order now at iptrading.com.au — trusted by Australian IT professionals. -
Vendor:Check Point
Check Point CPAC-DAC-10G-3M-D | 3m Passive for 9000/19000/29000, SFP+ 10GbE DAC Cable
CPAC-DAC-10G-3M-D
Stock Status: Enquire
Vendor:Check PointCheck Point CPAC-DAC-10G-3M-D | 3m Passive for 9000/19000/29000, SFP+ 10GbE DAC Cable
This 3m SFP+ 10GbE direct attach copper (DAC) cable delivers low‑latency, low‑power links for top‑of‑rack and in‑rack connections. Its passive twinax design integrates the SFP+ connectors and cable into a single, cost‑effective assembly. Engineered for Check Point 9000, 19000 and 29000 appliances with SFP+ ports, it provides reliable 10GbE connectivity without separate transceivers. Backed by the manufacturer’s hardware support when used with compatible systems. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Check Point
Check Point CPAC-DAC-10G-3M | 3m, SFP+ Direct Attach Cable 10GbE Twinax
CPAC-DAC-10G-3M
Stock Status: Enquire
Vendor:Check PointCheck Point CPAC-DAC-10G-3M | 3m, SFP+ Direct Attach Cable 10GbE Twinax
Establish high-speed 10GbE links between SFP+ ports with this 3m direct attach copper (DAC) cable. Designed for Check Point appliances and switches, it delivers low latency and solid signal integrity for short in-rack connections. SFP+ to SFP+ ends enable simple, hot-pluggable deployment with no external power or optics required. Backed by the manufacturer warranty for peace of mind. Get it now at iptrading.com.au — authentic hardware, reliable service. -
Vendor:Check Point
Check Point CPAC-DAC-10G-1M | Twinax Copper (SFP+ to SFP+), SFP+ 10GbE DAC Cable 1m
CPAC-DAC-10G-1M
Stock Status: Enquire
Vendor:Check PointCheck Point CPAC-DAC-10G-1M | Twinax Copper (SFP+ to SFP+), SFP+ 10GbE DAC Cable 1m
This 1m SFP+ 10GbE Direct Attach Copper (DAC) cable delivers dependable, low‑latency connectivity for short‑reach links between Check Point firewalls, switches, and servers. It provides a cost‑effective alternative to optical transceivers for in‑rack or adjacent‑rack connections. Built with robust twinax copper and hot‑pluggable SFP+ ends, it’s ideal for 10GbE uplinks, HA sync, and switch interconnects. Backed by the manufacturer’s warranty for peace of mind. Buy today from iptrading.com.au — fast shipping and expert service across Australia. -
Vendor:Check Point
Check Point CPAC-DAC-100G-5M | CPAC, 5m, DAC QSFP28 100GbE Direct Attach Copper Cable
CPAC-DAC-100G-5M
Stock Status: Enquire
Vendor:Check PointCheck Point CPAC-DAC-100G-5M | CPAC, 5m, DAC QSFP28 100GbE Direct Attach Copper Cable
Purpose-built for short-reach 100GbE links, this QSFP28 Direct Attach Copper (DAC) cable delivers low-latency, high-reliability connectivity between Check Point appliances and switches. The integrated QSFP28 ends are hot-pluggable, simplifying rapid deployment within racks and rows. Optimised for Check Point platforms with QSFP28 100GbE ports, the 5m assembly is a cost-effective alternative to optics for high-throughput interconnects. Manufacturer warranty applies per Check Point terms. Visit iptrading.com.au to secure your order — enterprise-grade hardware with expert support. -
Vendor:Check Point
Check Point CPAC-DAC-100G-3M-D | 3m Passive for 9000/19000/29000, 100GbE QSFP28 DAC Cable
CPAC-DAC-100G-3M-D
Stock Status: Enquire
Vendor:Check PointCheck Point CPAC-DAC-100G-3M-D | 3m Passive for 9000/19000/29000, 100GbE QSFP28 DAC Cable
High-speed 100GbE QSFP28 direct attach copper (DAC) cable for short-reach links between Check Point data centre appliances and switches. The passive twinax design delivers ultra‑low latency and near‑zero power consumption for cost‑effective in‑rack connectivity. Purpose‑built for Check Point 9000, 19000 and 29000 series appliances with QSFP28 ports, it provides plug‑and‑play, vendor‑validated compatibility and reliable 100G throughput across a 3m span. Upgrade your network with gear from iptrading.com.au — Australia’s IT hardware specialists.
Trusted ICT Solutions Backed by 20+ Years of Expertise
At IP Trading, we specialise in delivering high-quality ICT products and solutions tailored to business, government, and enterprise needs. With over two decades of experience, we provide seamless procurement, expert support, and competitive pricing on a vast range of networking, security, server, storage, and power solutions. Our dedicated account managers ensure streamlined interactions with preferred vendors, eliminating time-consuming follow-ups while offering expert advice on project design, sourcing, and implementation.
Why Choose IP Trading?
We are a trusted supplier to Federal, State, and Local Government departments, Not-for-Profit organisations, and businesses of all sizes. Our team of experts in technical sales, logistics, finance, and account management ensures efficiency at every stage—from presales consultation to contract negotiation. As a registered supplier on the Australian Government’s DTA Hardware Marketplace and a prequalified ICT provider for NSW and QLD Government projects, we bring credibility and reliability to every transaction. Partner with IP Trading for flexible, innovative, and cost-effective ICT solutions tailored to your needs.